(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Screw-Hole-Related Tools（Tool Material Type：Carbide）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
Days to Ship: 2 Day(s) or more -
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices
- Volume Discount
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: 2 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Planet Cutter Series NC Planet Cutter WX-PNC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
Days to Ship: 2 Day(s) or more -
Carbide Taps for Parallel Pipe Threads_CT-PS
YAMAWA MFG
With the main purpose of this product to provide tightness of thread section in the connection of pipe parts, etc., this is a hand tap for carbide parallel pipe threads suitable for mass-production with hard and brittle materials such as cast iron. The machined PS female threads are used to mate with PT male threads. [Features]·Chamfer 3.5P; straight groove shape carbide hand tap.
Days to Ship: 12 Day(s) or more -
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
Days to Ship: 12 Day(s) or more -
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
- Volume Discount
Days to Ship: 18 Day(s) or more -
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
··Carbide thread mill cutter capable of high-speed stable machining
·Can be used for both blind holes and through holes
·
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
Days to Ship: 16 Day(s) or more -
MISUMI
[Features]
·Carbide uncoated type hand tap
·Can be used for both blind holes and through holes
·Suitable for mass production tapping of various cast iron- Volume Discount
Days to Ship: 16 Day(s) or more -
Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
Days to Ship: 2 Day(s) -
Epoch D Thread Mill EDT-□.□□-□□-TH
MITSUBISHI HITACHI TOOL
[Features]
· Simultaneous drilling and thread cutting can be performed with 1 tool.
· Please use the product with the spindle reversed for the left blade.- STOCK
Days to Ship: 12 Day(s) -
Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT
YAMAWA MFG
With a short male thread and female thread fitting length, this is a carbide hand tap for cast iron tapered pipe threads with a short thread shape, suitable for mass-production machining of hard and brittle materials such as cast iron. [Features]·Chamfer 2.5P; straight groove hand tap shape.
Days to Ship: 12 Day(s) or more -
Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT
YAMAWA MFG
With the main purpose of this product to provide tightness of thread section in the connection of pipe parts, etc., this is a carbide hand tap for cast iron tapered pipe threads suitable for mass-produced threads made from hard and brittle materials such as cast iron. [Features]·Chamfer 2.5P; straight groove hand tap shape.
Days to Ship: 16 Day(s) or more -
Carbide Taps for Parallel Pipe Threads_CT-PF
YAMAWA MFG
This is a carbide hand tap for parallel pipe threads suitable for mass-production with hard and brittle materials such as cast iron. [Features]·Chamfer 3.5P; straight groove shape carbide hand tap.
Days to Ship: 12 Day(s) or more -
Carbide Thread Mills for Metric Internal Threads_MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.
Days to Ship: 12 Day(s) or more -
Carbide Taps for Light Alloys_N-CT-LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.
Days to Ship: 11 Day(s) or more -
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
Days to Ship: 12 Day(s) or more -
NACHI(FUJIKOSHI)
[Features]
· Suitable for long life thread processing of aluminum and cast iron.Days to Ship: 16 Day(s) or more -
Days to Ship: 12 Day(s) or more -
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
MISUMI
[Features]
·Carbide thread mill cutter capable of high-speed stable machining
·Can be used for both blind holes and through holes
·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for Non steel metals such as Aluminum and Copper- Volume Discount
Days to Ship: 16 Day(s) or more -
TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)
MISUMI
[Features]
·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible
·Reduced cutting load due to short flute length (3 ridges)
·Enables effective thread cutting to corners of blind holes- Volume Discount
Days to Ship: 18 Day(s) or more -
MISUMI
[Features]
·Carbide uncoated spiral flute tap
·Can be used for blind hole machining
·Suitable for mass production tapping of aluminum alloys and copper alloys- Volume Discount
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.
[Features]
· Excellent abrasion resistance and adhesion resistance.
· Improved chip discharge performance and service life.
[Applications]
· Ideal for mass tapping of aluminum and cast iron, etc.Days to Ship: 16 Day(s) or more -
Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.
Work material: High hardness steel to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3Days to Ship: 2 Day(s) or more -
Tungsten Carbide Spiral Tap_OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Days to Ship: 16 Day(s) or more -
Planet Cutter Series Super Planet DR-PNAC
OSG
A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity
Days to Ship: 2 Day(s) or more -
Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC
OSG
Enables efficient chip discharge by discharging cutting fluid from the oil holes.
Days to Ship: 15 Day(s) or more -
Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT
OSG
TiN coating excellent in welding resistance and abrasion resistance is applied
Days to Ship: 16 Day(s) or more -
Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT
OSG
TiN coating excellent in welding resistance and abrasion resistance is applied
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT
OSG
Excellent for hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC to 60 HRC or higher
Days to Ship: 16 Day(s) or more -
Long Shank・with Interrupted Threads_EX-LT-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: 16 Day(s) or more -
Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: 16 Day(s) or more -
Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Days to Ship: 16 Day(s) or more -
Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT
OSG
This is a long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Days to Ship: 16 Day(s) or more -
Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Days to Ship: 16 Day(s) or more -
Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT
OSG
This is a short thread long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Days to Ship: 16 Day(s) or more -
Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | MISUMI | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | MISUMI | MISUMI | MISUMI | OSG | MITSUBISHI HITACHI TOOL | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | YAMAWA MFG | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads | Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT | Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex) | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC | Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT | Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT | Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT | Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT | Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT | Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT | Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT | Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT | Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT | Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT | ||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 2 Day(s) | 12 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 11 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 18 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 15 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Screw size (Nominal) | M2 ～ M20 | M3 ～ M20 | R1/2 ～ R3/8 | M1.4 ～ M20 | M3 ～ M12 | M3 ～ M20 | - | 1'-11 ～ 3/8-19 | M2 ～ M20 | M2 ～ M12 | M3 ～ M12 | M3 ～ M10 | M6 ～ M12 | M4 ～ M12 | 1/2-14 ～ 3/8-19 | 1'-11 ～ 3/8-19 | 1'-11 ～ 3/8-19 | 06510X28R ～ 200505N300M | M1.4 ～ M20 | No.10-32UNF ～ M24 | M4 ～ M12 | 3.5 ～ 9 | M3 ～ M16 | M1.4 ～ M20 | M3 ～ M10 | M3 ～ M12 | - | M3 ～ M12 | M3 ～ M12 | M6 ～ M12 | - | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | G1/2 ～ G3/8 | G1/2 ～ G3/8 | M3 ～ M12 |
| Screw Types | Meter | Meter | Taper for Pipe | Meter | Meter | Meter | Meter / unified / Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter |
| work material | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] |
| Pitch (P), Number of Threading(mm) | 0.4 ～ 2.5 | 0.5 ～ 2.5 | 14 ～ 28 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 0.5 ～ 2.5 | 1 ～ 28 | - | 0.4 ～ 2.5 | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 1 ～ 1.75 | 0.7 ～ 1.75 | - | - | - | 0.5 ～ 3 | 0.3 ～ 2.5 | 0.3 ～ 3 | 0.7 ～ 1.75 | 0.75 ～ 1.75 | 0.5 ～ 2 | 0.3 ～ 2.5 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.25 ～ 32 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 3 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 0.5 ～ 1.75 |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tap Type | Hand Tap | Thread cutter | Tap for pipes | Hand Tap | Roll tap | Hand Tap | Thread cutter | Tap for pipes | Point tap | Thread cutter | Thread cutter | Hand Tap | Thread cutter | Thread cutter | Tap for pipes | Tap for pipes | Tap for pipes | Thread cutter | Hand Tap | Hand Tap | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Hand Tap | Thread cutter | Hand Tap | Spiral Tap | Thread cutter | Thread cutter | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Chamfer threads (Lcf) | 3P | - | 2.5P | 1.5P ～ 3P | 2P | 1.5P ～ 3P | - | 3.5P | 5P | - | - | 1.5P ～ 3P | - | - | 2.5P | 2.5P | 3.5P | - | 1.5P ～ 5P | 1.5P ～ 3P | 2.5 | - | - | - | 1.5P ～ 2.5P | 1.5P ～ 3P | - | 2.5P ～ 5P | 1.5P ～ 2.5P | - | - | 2.5P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 2P |
| Coating Type | TiCN / Other | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | - | TiAlN | For High Hardness (Silicon Group) | - | - | - | TiAlN | - | - | TiCN | Other | DLC | TiAlN | - | TiCN | For High Hardness (Silicon Group) / Other | TiCN | Non-Coated | TiAlN | TiAlN | TiN | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Coating Y/N | Available | Available | NA | NA | NA | NA | Available | NA | Available | Available | Available | NA | Available | Available | NA | NA | NA | Available | NA | NA | Available | Available | Available | Available | NA | Available | Available | Available | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 40 ～ 105 | 57 ～ 115 | 100 ～ 150 | 34 ～ 105 | 46 ～ 82 | 100 ～ 150 | 60 ～ 120 | 55 ～ 95 | 40 ～ 105 | 58 ～ 73 | 48 ～ 74 | 46 ～ 75 | 62 ～ 89 | 50 ～ 80 | 55 ～ 80 | 55 ～ 95 | 55 ～ 95 | 50 ～ 140 | 34 ～ 105 | 34 ～ 120 | 52 ～ 82 | - | 57 ～ 92 | 39 ～ 105 | 46 ～ 75 | 46 ～ 82 | 40 | 46 ～ 82 | 46 ～ 82 | 62 ～ 89 | 60 ～ 120 | 55 ～ 95 | 55 ～ 95 | 59 ～ 87 | 120 ～ 150 | 55 ～ 95 | 120 ～ 150 | 100 ～ 150 | 55 ～ 95 | 100 ～ 150 | 55 ～ 80 | 55 ～ 80 | 55 ～ 80 | 100 ～ 150 | 100 ～ 150 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1UN
- No.10UN
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PT1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- M1 to 10
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- R2
- W2
- 2-8UN
- W2"1/4
- M2 to 4.5
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- M3
- M3.0
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- SM3/32
- 3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M4 to 6
- M4 to 13
- M4.5
- 5M
- M5
- M5.0
- M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5.5M
- M5.5
- 6
- M6
- M6.0
- No6-40UNF
- M6 to 20
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- 7.5
- M8
- TV8
- 9
- M9
- PG9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M10
- M10
- M10 to 13
- M10 to 25
- M11
- PG11
- SM11/32
- SM11/64
- M12
- M12
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M19 to 32
- M19 to 38
- M20
- M21
- PG21
- M22
- M22X
- M23
- M24
- M24X
- M25
- M25X
- M25 to 50
- M25 to 70
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M48
- M50
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 27
- 28
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- OSG (26)
- YAMAWA MFG (15)
- EIKOSHA (2)
- GUHRING (2)
- NACHI(FUJIKOSHI) (2)
- NS TOOL (2)
- MITSUBISHI HITACHI TOOL (1)
- NOGA JAPAN (0)
- H & H (0)
- KANETEC (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- ISHIHASHI (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- SKC (0)
- ENGINEER (0)
- RENNSTEIG (0)
- UNION TOOL (0)
- ONISHI MANUFACTURING (0)
- RUKO (0)
- SANDVIK (0)
- TANOI MFG (0)
- DC SWISS (0)
- ESCO (0)
- LIGHTSEIKI (0)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy