(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Screw-Hole-Related Tools(Tool Material Type:Carbide Page2)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Epoch D Thread Mill EDT-□.□□-□□-TH

      Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

        Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT

          Carbide Taps for Parallel Pipe Threads_CT-PS

            Carbide Thread Mills for Metric Internal Threads_MC-CSLC

              Spiral Pointed Carbide Taps_N-CT-PO

                Carbide Taps for Ultra Fast Tappings, Blind Hole Use, for Aluminum_HFACT-B

                  Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Aluminum_HFACT-P

                    Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B

                      Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P

                        Excel Spiral Tap ESP

                          Thread Cutting Tool (for Unified Threads) MMTU

                          Brand

                          MITSUBISHI HITACHI TOOL

                          GUHRING

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          YAMAWA MFG

                          NACHI(FUJIKOSHI)

                          NS TOOL

                          Product Series

                          Epoch D Thread Mill EDT-□.□□-□□-TH

                          Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                          Carbide Taps for Taper Pipe Threads, Long (ℓg) Type, for Cast Irons_CT-PT

                          Carbide Taps for Parallel Pipe Threads_CT-PS

                          Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                          Spiral Pointed Carbide Taps_N-CT-PO

                          Carbide Taps for Ultra Fast Tappings, Blind Hole Use, for Aluminum_HFACT-B

                          Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Aluminum_HFACT-P

                          Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B

                          Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P

                          Excel Spiral Tap ESP

                          Thread Cutting Tool (for Unified Threads) MMTU

                          Days to Ship 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                          Specifications
                          • STOCK
                                                Screw size (Nominal)M4 ~ M12M6 ~ M201'-11 ~ 3/8-191'-11 ~ 3/8-1906510X28R ~ 200505N300MM3 ~ M12M6 ~ M12M6 ~ M12M6 ~ M12M6 ~ M12M4 ~ M12NO.0-80UNF ~ 1/4-20UNC
                                                Screw TypesMeterMeterTaper for PipeParallel for PipesMeter / Taper for Pipe / Parallel for PipesMeterMeterMeterMeterMeterMeterunified
                                                work materialQuenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎]-Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]
                                                Pitch (P), Number of Threading(mm)0.7 ~ 1.751 ~ 2.5--0.5 ~ 30.5 ~ 1.751 ~ 1.751 ~ 1.751 ~ 1.751 ~ 1.750.7 ~ 1.75-
                                                Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                                Tap TypeThread cutterThread cutterTap for pipesTap for pipesThread cutterPoint tapPoint tapPoint tapPoint tapPoint tapSpiral TapThread cutter
                                                Hole type-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through holeFor blind holeFor through holeFor blind holeFor through holeFor through hole / For blind holeFor blind hole
                                                Chamfer threads (Lcf)--2.5P3.5P-5P2.5P4P2.5P4P2.5-
                                                Coating TypeFor High Hardness (Silicon Group)TiCN--TiAlN-TiAlNTiAlNTiAlNTiAlNTiCNTiAlN
                                                Coating Y/NAvailableAvailableNANAAvailableNAAvailableAvailableAvailableAvailableAvailableAvailable
                                                Overall Length (L)(mm)50 ~ 8054 ~ 10255 ~ 9555 ~ 9550 ~ 14046 ~ 8262 ~ 8262 ~ 8262 ~ 8262 ~ 8252 ~ 8245

                                                Loading...

                                                Related Categories to Screw-Hole-Related Tools