(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Point Taps(Screw size (Nominal):M22)

An online store for point taps. In MISUMI's e-catalog (online general catalog), specifications/dimensions of nominal, pitch, screw type, delivery date, etc. can be selected with one click, so you can easily find the desired point tap. Point taps are available for a wide range of applications, such as for hard-to-cut materials, deep holes, or thin plates.

[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 15 Day(s) or Less
  • 17 Day(s) or Less
  • 27 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Model A Tap Series, Pointed Tap A-POT

      Pointed Tap Series, General Purpose EX-POT

        LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

          Spiral Pointed Tap with Long Shank_A-LT-POT

            Pointed Tap Series TiN Coating TIN-POT

              Pointed Tap TiN coated with Long Shank_TIN-LT-POT

                Pointed Tap for General Application (with OX)_EX-H-POT

                  Long jet tap

                    Spiral Pointed Taps for Stainless Steels_SU+PO

                      Spiral Pointed Taps for High Carbon Steels_HC+PO

                        Short Spiral Pointed Taps for Deep Hole Use_S-PO

                          Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                            SG Point Tap SGPO

                            Brand

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            ISHIHASHI

                            YAMAWA MFG

                            YAMAWA MFG

                            YAMAWA MFG

                            YAMAWA MFG

                            NACHI(FUJIKOSHI)

                            Product Series

                            Model A Tap Series, Pointed Tap A-POT

                            Pointed Tap Series, General Purpose EX-POT

                            LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

                            Spiral Pointed Tap with Long Shank_A-LT-POT

                            Pointed Tap Series TiN Coating TIN-POT

                            Pointed Tap TiN coated with Long Shank_TIN-LT-POT

                            Pointed Tap for General Application (with OX)_EX-H-POT

                            Long jet tap

                            Spiral Pointed Taps for Stainless Steels_SU+PO

                            Spiral Pointed Taps for High Carbon Steels_HC+PO

                            Short Spiral Pointed Taps for Deep Hole Use_S-PO

                            Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                            SG Point Tap SGPO

                            Days to Ship 8 Day(s) or more 2 Day(s) 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 2 Day(s) 8 Day(s) 8 Day(s) or more Quote 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                            Specifications
                              • STOCK
                                      • STOCK
                                                  Screw size (Nominal)M22M22M22M22M22M22M22M22M22M22M22M22M22
                                                  Screw TypesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                  work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]
                                                  Pitch (P), Number of Threading(mm)1 ~ 2.51.5 ~ 2.51.5 ~ 2.51 ~ 2.51.5 ~ 2.51.5 ~ 2.51.5 ~ 2.52.51.5 ~ 2.52.51.5 ~ 2.51.5 ~ 2.52.5
                                                  Tool Material TypePowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel-High-speed steelHigh-speed steelHigh-speed steelCobalt HSSHigh-speed steel
                                                  Tap TypePoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tap
                                                  Hole typeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through hole
                                                  Chamfer threads (Lcf)5P5P6P5P5P5P5P-5P5P5P4.5P5
                                                  Coating TypeOtherNon-CoatedTiNOtherTiNTiNNon-CoatedOther----TiCN
                                                  Coating Y/NAvailableNAAvailableAvailableAvailableAvailableNAAvailableNANANANAAvailable
                                                  Overall Length (L)(mm)115115150150115200115150115115115115115

                                                  Loading...

                                                  1. 1

                                                  Related Categories to Point Taps