(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Roll Taps(Coating Type:TiCN)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 15 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

      Fluteless Tap (X Performer)_S-XPF

        Seamless TAFLET

          Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT

            Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS

              Roll Taps for Dry Tapping, Coated_OL+RZ

                SU Roll Tap for SURZ Unify Screw Thread

                  CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                    CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                      CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                        Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

                          IT-Toughlet TiCN Coated

                            Long seamless TAFLET

                              Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                High Performance Roll Taps, Coated_HP+RZ

                                  SU Roll Tap for SURZ Metric Screw Thread

                                  Brand

                                  OSG

                                  OSG

                                  TANOI MFG

                                  OSG

                                  OSG

                                  YAMAWA MFG

                                  YAMAWA MFG

                                  OSG

                                  OSG

                                  OSG

                                  OSG

                                  TANOI MFG

                                  TANOI MFG

                                  YAMAWA MFG

                                  YAMAWA MFG

                                  YAMAWA MFG

                                  Product Series

                                  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                  Fluteless Tap (X Performer)_S-XPF

                                  Seamless TAFLET

                                  Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT

                                  Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS

                                  Roll Taps for Dry Tapping, Coated_OL+RZ

                                  SU Roll Tap for SURZ Unify Screw Thread

                                  CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                  CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                                  CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                                  Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

                                  IT-Toughlet TiCN Coated

                                  Long seamless TAFLET

                                  Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                  High Performance Roll Taps, Coated_HP+RZ

                                  SU Roll Tap for SURZ Metric Screw Thread

                                  Days to Ship 8 Day(s) or more Same day or more 8 Day(s) or more 12 Day(s) or more 2 Day(s) or more 8 Day(s) or more 8 Day(s) 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                  Screw size (Nominal)No.2UN ~ M12M1 ~ M45M2 ~ M20M3M1 ~ M2.5No.10 ~ M6No.2 ~ No.6No.2UN ~ M3No.2UN ~ M6No.2UN ~ M12M4 ~ M6M1 ~ M10M4 ~ M6M1 ~ M6No.10-32UNF ~ M20M1 ~ M3
                                  Screw TypesMeter / unifiedMeterMeterMeterMeterMeter / unifiedMeterMeter / unifiedMeter / unifiedMeter / unifiedMeterMeterMeterMeterMeter / unifiedMeter
                                  work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
                                  Pitch (P), Number of Threading(mm)0.25 ~ 560.2 ~ 4.50.4 ~ 2.50.50.25 ~ 0.450.25 ~ 640.45 ~ 0.790.25 ~ 560.25 ~ 560.25 ~ 560.7 ~ 10.2 ~ 1.50.7 ~ 10.2 ~ 10.25 ~ 1.750.2 ~ 0.5
                                  Tool Material TypePowder high-speed steelPowder high-speed steel / Vanadium High-Speed SteelHigh-speed steelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelHigh-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steel
                                  Tap TypeRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tap
                                  Hole typeFor blind holeFor through hole / For blind hole-For through hole / For blind holeFor blind holeFor through holeFor through hole / For blind holeFor blind holeFor blind holeFor blind holeFor through hole--For blind holeFor through hole / For blind holeFor through hole / For blind hole
                                  Chamfer threads (Lcf)2P ~ 4P2P ~ 4P1P ~ 2P2P2P4P2P2P1P2P ~ 4P8P1P ~ 4P1P ~ 2P1P2P ~ 4P2P
                                  Coating TypeTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCNTiCN
                                  Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                  Overall Length (L)(mm)30 ~ 8230 ~ 22040 ~ 1054630 ~ 4436 ~ 6242 ~ 5230 ~ 4630 ~ 6260 ~ 20052 ~ 6230 ~ 7570 ~ 12036 ~ 6236 ~ 10536 ~ 46

                                  Loading...

                                  1. 1

                                  Related Categories to Roll Taps