(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 11:00 29/11/2020 sampai dengan 6:00 pada tanggal 30/11/2020. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 11:00 29/11/2020 to 6:00 (WIB) 30/11/2020. We apologize for the inconvenience.

Thread-Cutting-Related Tools

Threading-related tools are a variety of useful tools used when setting up screws, excluding typical taps and dies. Drill tap with integrated drill and tap, and female thread is set at a time even when there is no pilot hole, enabling high-efficiency work. A tap / drill bit set with a drill bit set for pilot holes attached to the tap set. A check pin dedicated to pilot holes that can easily and accurately inspect the pilot hole diameter of the screw and reduce defects in female thread processing. The lineup includes a magnet tapper that can be fixed with a magnet and tapped vertically, and that can prevent twisting bending and breakage. There are a wide variety of specifications for screws, so select a screw standard, thread diameter, and ridge pitch according to the processing purpose.
Days to Ship
  • All
  • 2 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
  • 19 Day(s) or Less
  • 20 Day(s) or Less
  • 30 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

    Nut Tap Series Nut Tap NT

      Hand Tap / Drill Set

        Tap Series for Machining Center, Short Type for Machining Center EX-S-MCT

          Drill Tap Series Drill Tap DRT

            Tap Set K-431

              Nut Tap Series Nut Tap For Oversize O-NT

                Tap Series for Machining Center, Long Shank Type for Machining Center EX-MCT

                  Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

                    Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

                      Hexagonal Shaft Tapping Drill

                        Hexagonal Shaft Tap (for Through Hole)

                          CeraTap Electrodeposited Diamond Tool for Grading Center ED-PNT

                            PLUG TAP

                              Tire Valve Thread

                                Tap Dice Set, Product for DIY

                                  Drill Tap

                                    Screw Thread Die Screw Type

                                      Screw for Bicycle

                                        21 PCS Tap & Die Set

                                          Hex Shaft Electric Screwdriver Tap

                                            Hexagonal Shank Combination Tap Drill

                                              Drilling Tap

                                                Cobalt jet/spiral type/drill set

                                                  Cobalt spiral type/drill set

                                                    Spiral Tap / Drill Set for Electric Construction

                                                      Mid Tap / Drill Set for Electric Construction

                                                        Spiral Tap / Drill Set

                                                          Jet tap/drill set

                                                            Tap/Drill - One Pack

                                                              Jet/spiral tap/drill set

                                                                Simple Thread Measuring Tool Dual Type (for 6H) SMTD

                                                                  Pilot Hole Check Pins for Cutting (Straight Type) CPC-S

                                                                    Hole Check Pin for Cutting (Straight Type) CPC-T

                                                                      Magnet Tapper

                                                                        Union Tool Screw Cutting Tool

                                                                          Mag Tap 3–12 mm

                                                                            Pilot Hole Check Pin for Roll Taps - Straight Type CPR-S

                                                                              Pilot Hole Check Pin for Roll Taps - Taper Type CPR-T

                                                                                Shank Adjuster SA

                                                                                Brand

                                                                                OSG

                                                                                ISHIHASHI

                                                                                OSG

                                                                                OSG

                                                                                HOZAN

                                                                                OSG

                                                                                OSG

                                                                                ONISHI MANUFACTURING

                                                                                ONISHI MANUFACTURING

                                                                                ONISHI MANUFACTURING

                                                                                ONISHI MANUFACTURING

                                                                                OSG

                                                                                SKC

                                                                                SKC

                                                                                SKC

                                                                                SKC

                                                                                SKC

                                                                                SKC

                                                                                H & H

                                                                                H & H

                                                                                SK 11

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                ISHIHASHI

                                                                                YAMAWA MFG

                                                                                YAMAWA MFG

                                                                                YAMAWA MFG

                                                                                NEW STRONG

                                                                                UNION TOOL

                                                                                KANETEC

                                                                                YAMAWA MFG

                                                                                YAMAWA MFG

                                                                                YAMAWA MFG

                                                                                Product Series

                                                                                Nut Tap Series Nut Tap NT

                                                                                Hand Tap / Drill Set【21 Pieces Per Package】

                                                                                Tap Series for Machining Center, Short Type for Machining Center EX-S-MCT

                                                                                Drill Tap Series Drill Tap DRT

                                                                                Tap Set K-431

                                                                                Nut Tap Series Nut Tap For Oversize O-NT

                                                                                Tap Series for Machining Center, Long Shank Type for Machining Center EX-MCT

                                                                                Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

                                                                                Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

                                                                                Hexagonal Shaft Tapping Drill

                                                                                Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】

                                                                                CeraTap Electrodeposited Diamond Tool for Grading Center ED-PNT

                                                                                PLUG TAP

                                                                                Tire Valve Thread

                                                                                Tap Dice Set, Product for DIY

                                                                                Drill Tap

                                                                                Screw Thread Die Screw Type

                                                                                Screw for Bicycle

                                                                                21 PCS Tap & Die Set

                                                                                Hex Shaft Electric Screwdriver Tap

                                                                                Hexagonal Shank Combination Tap Drill

                                                                                Drilling Tap

                                                                                Cobalt jet/spiral type/drill set【21 Pieces Per Package】

                                                                                Cobalt spiral type/drill set

                                                                                Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】

                                                                                Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】

                                                                                Spiral Tap / Drill Set【21 Pieces Per Package】

                                                                                Jet tap/drill set【21 Pieces Per Package】

                                                                                Tap/Drill - One Pack【3 Pieces Per Package】

                                                                                Jet/spiral tap/drill set【21 Pieces Per Package】

                                                                                Simple Thread Measuring Tool Dual Type (for 6H) SMTD

                                                                                Pilot Hole Check Pins for Cutting (Straight Type) CPC-S

                                                                                Hole Check Pin for Cutting (Straight Type) CPC-T

                                                                                Magnet Tapper

                                                                                Union Tool Screw Cutting Tool

                                                                                Mag Tap 3–12 mm

                                                                                Pilot Hole Check Pin for Roll Taps - Straight Type CPR-S

                                                                                Pilot Hole Check Pin for Roll Taps - Taper Type CPR-T

                                                                                Shank Adjuster SA

                                                                                Days to Ship 9 Day(s) or more 20 Day(s) 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 2 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 10 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 10 Day(s) or more 10 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 2 Day(s) 9 Day(s) or more 2 Day(s) 9 Day(s) or more 30 Day(s) 19 Day(s) or more 9 Day(s) or more 9 Day(s) or more 11 Day(s) or more 11 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 11 Day(s) or more 9 Day(s) or more
                                                                                Screw TypesMeter / unified / Whitworth-MeterMeterMeterMeterMeterMeterMeterMeterMeterOtherMeter--Meter / Whitworth-Whitworth---MeterMeterMeter----Meter / Whitworth-MeterMeter / unifiedMeter---Meter / unifiedMeter / unified-
                                                                                Screw size (Nominal)1UN ~ M39-M6 ~ M24M3 ~ M16-M3 ~ M12M6 ~ M24M3 ~ M10M3 ~ M12M3 ~ M6M3 ~ M8-M10 ~ M18CTV5 ~ TV10M2~10 ~ M4~10W1/2 ~ M22-BC1 ~ BC9/16--M3 ~ M10M3 ~ M12------W1/2 ~ M12-M2.5No.10 ~ M12M2 ~ M12-M2 ~ M8-No.10 ~ 7/16No.10 ~ 7/16-
                                                                                Pitch (P), Number of Threading(mm)0.4 ~ 40-1 ~ 30.5 ~ 2-0.5 ~ 1.751 ~ 30.5 ~ 1.50.5 ~ 1.750.5 ~ 10.5 ~ 1.250.5 ~ 21 ~ 1.524 ~ 36-0.5 ~ 40-20 ~ 26--0.5 ~ 1.50.5 ~ 1.75------0.5 ~ 20-0.4556 ~ 64--0.4 ~ 1.25-56 ~ 6456 ~ 64150
                                                                                Chamfer threads (Lcf)--3P5P--3P-----5P--------------------------
                                                                                Tool Material TypeHigh-speed steel-Vanadium High-Speed SteelHigh-speed steelHigh-speed steelHigh-speed steelVanadium High-Speed SteelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steel-High-speed steelHigh-speed steel---High-speed steel----Cobalt HSSCobalt HSS--High-speed steel--High-speed steelHigh-speed steelHigh-speed steelHigh-speed steel---High-speed steelHigh-speed steel-
                                                                                work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]-Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]---------------------
                                                                                Tap TypeThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolPoint tapThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolPoint tapThread-cutting-related toolThread-cutting-related tool-Thread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool-Thread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool
                                                                                Hole type--For through hole / For blind hole-For through hole / For blind hole-For through hole / For blind holeFor through holeFor through hole / For blind holeFor through holeFor through hole--For blind hole---For blind hole-For through hole-----------For through hole / For blind hole----For blind holeFor through hole / For blind hole-
                                                                                Coating Y/NNANANANANANANAAvailableNANANA--NA---NANANA-AvailableNANANANANANANANANANANA-Available-NANANA
                                                                                Coating TypeNon-CoatedNon-CoatedNon-CoatedNon-Coated-Non-CoatedNon-CoatedTiNNon-CoatedNon-CoatedNon-Coated--Non-Coated---Non-CoatedNon-CoatedNon-Coated-OtherNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated----Other-Non-CoatedNon-CoatedNon-Coated
                                                                                Overall Length (L)(mm)80 ~ 340-62 ~ 12062 ~ 159-90 ~ 170120 ~ 2007070 ~ 8266 ~ 6970 ~ 70/70/7050 ~ 80100 ~ 12060 ~ 75-67 ~ 230-70 ~ 110---55 ~ 110--------4641.5 ~ 12142 ~ 110-50 ~ 60-41.5 ~ 12159.5 ~ 61.5103 ~ 127

                                                                                Loading...

                                                                                1. 1

                                                                                Related Categories to Thread-Cutting-Related Tools