(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Chamfering / Centering Tools（work material：Titanium）

Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.

Search by specifying the lower class category

51 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

Leading Drill TIN-NC-LDS

OSG

TiN coating enables higher speed and longer service life compared to NC-LDS

Days to Ship: 16 Day(s) or more
Leading Drill VP-LDS

OSG

V coating enables longer service life compared to TIN-NC-LDS

Days to Ship: 16 Day(s) or more
Leading Drill, Carbide FX Coating FX-LDS

OSG

90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

Days to Ship: 16 Day(s) or more
Carbide HG Center Drill Bit A Type 60゜

IWATA TOOL

High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

Days to Ship: 12 Day(s) or more
Straight Shank, Countersink, HSS, TiAlN Coating 90°

ILIX

Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work. For SUS and difficult-to-cut material.

Days to Ship: 16 Day(s) or more
Insert for Engraving Cutter

Nine9

The special insert design realizes an ultra-long operating life.

STOCK
Days to Ship: 1 Day(s)
Counter Sink 90° E6819

WALTER TITEX

[Features]
· HSS-Non-coated.
· Form C.
· Right torsion.
· 90° chamfer angle.

Days to Ship: 12 Day(s)
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

SANDVIK

High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized tooling

Days to Ship: 16 Day(s) or more
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

OSG

90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

Days to Ship: 16 Day(s) or more
Insert for Spot Drill

Nine9

Insert for NC spot drill holder.

Days to Ship: 8 Day(s) or more
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9

THE CUT

[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·

Days to Ship: 16 Day(s) or more
2-flute, Corner Rounding Type FX-ECR

OSG

Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

Days to Ship: 16 Day(s) or more
3-flute Chamfering Cutter (negative type) HSCT-N

OSG

End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute Chamfering Cutter (positive type) HSCT-P

OSG

End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

OSG

Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

OSG

Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
End Mill Chamfer Cutter CE□□

MITSUBISHI HITACHI TOOL

The base material is cobalt high-speed steel.
Work Material, General Steel/Stainless Steel/Aluminum/Titanium
Single-edge blade
With or without peripheral edge: with edge
Tool grade, High-speed steel
Tip angle (θ) 90

Days to Ship: 16 Day(s) or more
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200

NS TOOL

Supports NCs and MCs. R chamfering can be easily machined. Infinity coating used for significantly greater durability

Days to Ship: 12 Day(s) or more
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Days to Ship: 16 Day(s) or more
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

OSG

Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

Days to Ship: 16 Day(s) or more
Counter Sink Set TiAlN Coating 6 Pairs【6 Pieces Per Package】

ILIX

Ideal for chamfering, countersinking, and deburring. Frequently used sizes are selected and stored in a metal case. A handle is attached to enable manual operation.

Days to Ship: 16 Day(s) or more
FAGCCRC, FA Coated Carbide Corner Rounding Cutter

SANKO MFG

[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machining

Days to Ship: 12 Day(s) or more
FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter

SANKO MFG

[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· The long shank allows for machining in deep sections.
· FA GCCRC long shank end mill

Days to Ship: 10 Day(s) or more
HSS, HG Center Drill Bit, A Type 60°

IWATA TOOL

[Features]
· High-grade center drill for mass production.
· Thoroughly improves tact time and achieves a stable life.
· Center drill improved for mass production.
· Small diameter sizes, in particular, boast life several times longer than conventional center drills

Days to Ship: 12 Day(s) or more
Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating

IWATA TOOL

[Features]
· The raking blades/flutes ensure a highly precise rounded form.
· First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy

Days to Ship: 16 Day(s) or more
Toglon Sharp SP 60° Carbide

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Days to Ship: 12 Day(s) or more
Toglon Sharp SP 60° Carbide DLC Coating

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Days to Ship: 16 Day(s) or more
Toglon Sharp SP 90° Carbide DLC Coating

IWATA TOOL

[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.

Days to Ship: 16 Day(s) or more
Toglon Sharp SP 90° Carbide Long Type

IWATA TOOL

[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.

Days to Ship: 16 Day(s) or more
Toglon Sharp SP 90° Carbide Long Type DLC Coating

IWATA TOOL

[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.

Days to Ship: 16 Day(s) or more
Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating

IWATA TOOL

High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

Days to Ship: 16 Day(s) or more
Carbide HG Center Drill Bit, A Type 90°

IWATA TOOL

High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.

Days to Ship: 16 Day(s) or more
Carbide SP Center 120°

IWATA TOOL

[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

Days to Ship: 16 Day(s) or more
Carbide SP Center 60°

IWATA TOOL

[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

Days to Ship: 16 Day(s) or more
Carbide SP Center 90°

IWATA TOOL

[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.

STOCK
Days to Ship: 1 Day(s) or more
Carbide Center Drill Bit, A Type 60°

IWATA TOOL

[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.

Days to Ship: 12 Day(s) or more
NC Spot Drill 90° A1115

WALTER TITEX

HSS, Non-Coated, Type NC, Right Torsion, 90° Tip Angle

Days to Ship: Quote
Hexagonal Shank Countersink (90° Tip Angle)

RUKO

[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.

Days to Ship: 12 Day(s)
Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated)

RUKO

[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.

Days to Ship: 12 Day(s)
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

7 LEADERS

[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.

Days to Ship: 10 Day(s) or more
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
MUGEN Coating C Chamfer Cutter NSCV-M

NS TOOL

[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.

Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	Quote

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)


Brand	OSG	OSG	OSG	IWATA TOOL	ILIX	Nine9	WALTER TITEX	SANDVIK	OSG	Nine9	THE CUT	OSG	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	NS TOOL	OSG	OSG	ILIX	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	IWATA TOOL	WALTER TITEX	RUKO	RUKO	7 LEADERS	OSG	OSG	OSG	OSG	NS TOOL
Product Series	Leading Drill TIN-NC-LDS	Leading Drill VP-LDS	Leading Drill, Carbide FX Coating FX-LDS	Carbide HG Center Drill Bit A Type 60゜	Straight Shank, Countersink, HSS, TiAlN Coating 90°	Insert for Engraving Cutter	Counter Sink 90° E6819	CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	Insert for Spot Drill	Chamfering Cutter Super Mentori-Maru MTMS 6.5/9	2-flute, Corner Rounding Type FX-ECR	3-flute Chamfering Cutter (negative type) HSCT-N	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	End Mill Chamfer Cutter CE□□	MUGEN-COATING 2-Flute Inner Radius Cutter MIR200	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Counter Sink Set TiAlN Coating 6 Pairs【6 Pieces Per Package】	FAGCCRC, FA Coated Carbide Corner Rounding Cutter	FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter	HSS, HG Center Drill Bit, A Type 60°	Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type	Toglon Sharp SP 90° Carbide Long Type DLC Coating	Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating	Carbide HG Center Drill Bit, A Type 90°	Carbide SP Center 120°	Carbide SP Center 60°	Carbide SP Center 90°	Carbide Center Drill Bit, A Type 60°	NC Spot Drill 90° A1115	Hexagonal Shank Countersink (90° Tip Angle)	Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated)	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N	WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P	WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N	MUGEN Coating C Chamfer Cutter NSCV-M
Days to Ship	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	1 Day(s)	12 Day(s)	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	12 Day(s) or more	Quote	12 Day(s)	12 Day(s)	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications						STOCK																													STOCK
Tool Material Type	High-speed steel	Powder high-speed steel	Carbide	Carbide	High-speed steel	Carbide	High-speed steel	Carbide	Carbide	Carbide	-	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	Carbide	Powder high-speed steel	Powder high-speed steel	High-speed steel	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	3 ～ 25	3 ～ 25	16 ～ 25	0.2 ～ 3	6.3 ～ 37	0.45～2.1 ～ 0.45～2.7	4.3 ～ 25	8 ～ 12	16 ～ 25	1–6 ～ 3 to 15	-	0.5 ～ 1.5	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	50	0.8 ～ 12.1	-	3 ～ 25	6.3,8.3,10.4,12.4,16.5,20.5	4 ～ 14	4 ～ 14	0.3 ～ 1	3 ～ 5	1.2 ～ 16	2 ～ 16	1.2 ～ 16	3 ～ 12	3 ～ 12	0.2 ～ 1	0.2 ～ 3	0.4 ～ 16	0.03 ～ 6	0.03 ～ 6	1 ～ 8	12	1.5 ～ 3.5	1.5 ～ 3.5	0.5 ～ 20	-	-	-	-	4 ～ 6
Tip angle (θ)	60 ～ 120	90	90	60	90	45 ～ 60	90	90°	90	90	-	-	90	90	90	90	90	-	-	90	90	-	-	60	-	60	60	90	90	90	60	90	120	60	90	60	90	90	90	90	90°	-	-	-	45°
Application	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning)	Hole Chamfer	Centering (Positioning) / Engraved	Hole Chamfer	Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved	Hole Chamfer / Chamfering/Horizontal / V Groove / Other	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Hole Chamfer	Round Chamfer	Round Chamfer	Centering (Positioning)	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Centering (Positioning)	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)	Drilling	Hole Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	-	-	-	Chamfering/Horizontal
work material	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	-	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade / Double-edged	Single blade / Double-edged	Single blade / Double-edged	Double-edged	Single blade	Single blade	Single blade	-	Single blade	-	-	-	Single blade
Peripheral Blade Y/N	NA	NA	NA	NA	Available	NA	-	NA	NA	NA	-	NA	NA	NA	NA	NA	Available	-	NA	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	-	Available	Available	-	NA	-	-	-	Available
Coating Y/N	Available	Available	Available	NA	Available	Available	NA	Available	Available	Available	-	Available	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available	NA	Available	NA	Available	Available	NA	Available	Available	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiN	TiCN	TiAlN	-	TiAlN	TiN	Non-Coated	Other	TiAlN	TiAlN / DLC	-	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiCN	TiCN	TiAlN	TiAlN	TiAlN	-	Other	-	DLC	DLC	-	DLC	Other	-	-	-	-	-	Non-Coated	Non-Coated	TiN	Other	-	Other	Other	Other	TiAlN
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	0.1 ～ 5	-	-	-	0.5 ～ 5	0.5 ～ 5	-	0.5 ～ 3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Tool Diameter (D)(mm)
0 to 2

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.16

0.17

0.18

0.19

0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.3, 0.6

0.35

0.4

0.45

0.45～2.1

0.45～2.7

0.5

0.5, 1

0.55

0.6

0.65

0.65～2.1

0.65～2.7

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 2

1–6

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.

2

2–10

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3

3~14

3 to 15

3.1

3.15

3.2

3.3

3.4

3.5

3.6

3.8

4

4.2

4.3

4.4

4.5

4.6

4.8

5

5.1

5.2

5.3

5.4

5.5

5.6

5.8

6

6.2

6.3

6.3,8.3,10.4,12.4,16.5,20.5

6.30/8.30/10.40/12.40/16.50/20.50

6.3/8.3/10.4/12.4/16.5/20.5

6.35

6.4

6.5

6.6

6.8

7

7.2

7.3

7.4

7.5

7.6

7.7

7.8

8

8.2

8.3

8.4

8.5

8.8

9

9.1

9.4

9.5

9.52

10

10.1

10.2

10.3

10.4

10.5

10.8

11

11.1

11.2

11.4

11.5

11.88

12

12.1

12.3

12.4

12.5

12.7

13

13.4

13.5

14

14.2

14.4

14.5

14.6

14.8

15

15.1

15.2

15.4

15.5

15.6

15.87

16

16.15

16.3

16.5

16.5,20.5,25.0,37.0

17

17.1

17.7

18

18.2

18.5

18.6

19

19.05

19.5

20

20.5

21

21.77

22

22.3

22.5

23

23.4

23.5

24

24.5

25

25.0(+0.3)

Max: 25, Min: 4.2

25.20

25.3

26

26.5

26.6

27

28

28.5

29

29.9

30

Max: 30, Min: 4

30.20

30.5

31

Max: 31, Min: 10

31.5

31.7

31.9

32

32.6

32.7

33.1

33.3

34

34.1

34.8

34.9

35

35.4

35.9

36

36.9

37

37.1

37.9

38

39

39.83

40

Max: 41, Min: 20

42

43

45

45.6

46

47

48

49

49.85～134.6

50

50.7

51

52

52.8

53

53.6

53.91

54

54.3

55

56

56.8

57.0

57.9

58.2

60

61.4

62

62.2

63

64

64.6

65

66

67.4

67.94

69.2

69.8

70

71.8

72

73.3

74

75

76

80

90

95

100
Drawing

Clear

Tip angle (θ)
0–90

5～85

5～85°

15

20

25

30

35

40

45

45°

50

55

60

60°

60 × 120

65

70

75

80

90

90°

Center Hole Angle: 90°

Cutter Tip Angle: 100°

118

120

120°

125°

130

135

145+90
Drawing

Clear

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
- Drilling
- Other
Images

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

R0.5

0.5/1/1.5/2

0.5 to 4

0.5~5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1RM

1RY

R1

1, 1.5

1/2/3/4

1–3

1–5

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

1.8

1.85

1.9

1.95

2

2RM

2RY

R2

2, 3

2.05

2.1

2.15

2.2

2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.6

2.7

2.75

2.8

2.9

3

3RM

3RY

R3

3.25

3.5

R3.5

3.75

4

4RM

4RY

R4

4.25

4.5

R4.5

4.75

5

5RM

R5

5–10

5.25

5.5

5.75

6

R6

6.25

6.5

6.75

7

R7

7.25

7.5

7.75

8

R8

8.5

8.75

9

R9

9.5

10

R10

10.5

11

11.5

12

R12

12.5

R12.5

13

13.5

14

14.5

15

R15

15.5

16

R16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

XRM

XRY
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (0)
- Economy series (0)
- OSG (15)
- IWATA TOOL (14)
- THE CUT (7)
- ILIX (2)
- Nine9 (2)
- NS TOOL (2)
- RUKO (2)
- SANKO MFG (2)
- WALTER TITEX (2)
- 7 LEADERS (1)
- MITSUBISHI HITACHI TOOL (1)
- SANDVIK (1)
- RYOCO SEIKI (0)
- SKC (0)
- STAR-M (0)
- FUJIGEN (0)
- UNION TOOL (0)
- Poulten&Graf (0)
- KYOWA SEIKO (0)
- ALPEN (0)
- ESCO (0)
- YAMAWA MFG (0)
- BIG DAISHOWA SEIKI (0)
- ATI (0)
- WATERMILLS (0)
- MAPAL (0)
- ASAHI TOOLS (0)
- NOGA JAPAN (0)
- EIKOSHA (0)
- DIXI (0)
- DAIICHITOOL (0)
- OKAZAKI SEIKO (0)
- FUKUDA (0)
- ATOM (0)
- TRUSCO NAKAYAMA (0)
- DIJET (0)
- TAIYO-TOOL (0)
- OKABE (0)
- GUHRING (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Chamfering / Centering Tools

- MISUMI Home
- Cutting Tools

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Chamfering / Centering Tools（work material：Titanium）

Search by specifying the lower class category

Configure

Specification/Dimensions

Tool Material Type

Tool Diameter (D)(mm)

Tip angle (θ)

Application

work material

Single blade, two blades

Peripheral Blade Y/N

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Chamfering / Centering Tools（work material：Titanium）

Search by specifying the lower class category

Configure

Specification/Dimensions

Tool Material Type

Tool Diameter (D)(mm)

Tip angle (θ)

Application

work material

Single blade, two blades

Peripheral Blade Y/N

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB