(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.
Days to Ship: | 16 Day(s) or more |
---|
Holders for Joint Tools, for 150mm and for 200mm_JO-HOLDER
YAMAWA MFG
Joint tool that enables a wide variety of flutes suitable for processing applications to be equipped, with a single holder. [Features]·It is economical because all you have to do is to replace the flute. ·Strengthening the fastening force enables machining with heavy load such as grooving at the joint with the point drill.
Days to Ship: | 12 Day(s) or more |
---|
Long Shank Point Drills 60°, Coated_PE-SL-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 12 Day(s) or more |
---|
Point Drills 60°, Coated_PE-S-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 1 Day(s) or more |
---|
Point Drills 90°, Coated_PE-Q-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 1 Day(s) or more |
---|
Joint- Point Drills 90°, Coated_JO-PEQ-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiCN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 16 Day(s) or more |
---|
Long Shank Point Drills 90°, Coated_PE-QL-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 12 Day(s) or more |
---|
Joint- Countersinks 90°, Drilling Machine Use_JO-CSQM
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 16 Day(s) or more |
---|
Submarine Gate Cutter, 20°, 30°_CS-G
YAMAWA MFG
A specialized drill for use when machining submarine gates (tunnel gates) in the dies used for plastic injection molding.
Days to Ship: | 12 Day(s) or more |
---|
Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V
YAMAWA MFG
[Specifications]
· Shape: Centering
· Countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 10 Day(s) or more |
---|
Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V
YAMAWA MFG
[Features]
·Coating with excellent abrasion resistance and chip-adhesion-resistance
[Applications]
·Center Hole Drilling
・ Chamfering
Days to Ship: | 16 Day(s) or more |
---|
Joint- High Helix Center Drills-Type A 60°, Coated_JO-CES-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 16 Day(s) or more |
---|
High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I)
YAMAWA MFG
Former JIS 1-type center hole drill with a strong helical groove coated with excellent wear resistance and adhesion resistance.
Days to Ship: | 12 Day(s) or more |
---|
High Helix Center Drills-Type A 90°, Coated_CE-Q-V
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 16 Day(s) or more |
---|
Joint- Low Helix Center Drills-Type A 60°, Coated_JO-CDS-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 14 Day(s) or more |
---|
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 16 Day(s) or more |
---|
Joint- Point Drills 90°_JO-PEQ
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 16 Day(s) or more |
---|
Long Shank High Helix Center Drills-Type A 60°, Coated_CE-SL-V
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 12 Day(s) or more |
---|
Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V
YAMAWA MFG
A long shank weak helix groove A-type center hole drill suitable for positioning and chamfering in deep hole drilling, and has a coating with excellent wear and adhesion resistance.
Days to Ship: | 16 Day(s) or more |
---|
Long Shank High Helix Center Drills-Type A 60°_CE-SL
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 1 Day(s) or more |
---|
Long Shank High Helix Center Drills-Type A 90°_CE-QL
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 1 Day(s) or more |
---|
Long Shank Low Helix Center Drills-Type A 60°_CD-SL
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 16 Day(s) or more |
---|
Long Shank Low Helix Carbide Center Drills-Type A 60°_C-CD-SL
YAMAWA MFG
Carbide long shank weak helical groove A-type center hole drill suitable for particularly hard materials and mass production.
Days to Ship: | 16 Day(s) or more |
---|
Joint- Low Helix Center Drills-Type B 60°, (Old JIS Type 2 )_JO-CDS(II)
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 14 Day(s) or more |
---|
Joint- High Helix Center Drills-Type A 60°_JO-CES
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 16 Day(s) or more |
---|
High Helix Center Drills-Type A 60°, (Old JIS Type 1 )_CE-S(I)
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 12 Day(s) |
---|
High Helix Center Drills-JIS Type A 90°_CEQA
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 1 Day(s) or more |
---|
High Helix Center Drills-JIS Type B 60°_CESB
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 12 Day(s) or more |
---|
Joint- Low Helix Center Drills-Type A 60°_JO-CDS
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 10 Day(s) or more |
---|
Low Helix Center Drills-Type A 60°_CD-S
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 15 Day(s) |
---|
Joint- Low Helix Carbide Center Drills-Type A 60°_JO-C-CDS
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: Non-Coated
· Tool material: Carbide
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 20 Day(s) |
---|
Carbide Center Drills-Type A 60°_C-CD-S
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 12 Day(s) or more |
---|
Low Helix Center Drills-Type B 60°, (Old JIS Type 2 )_CD-S(II)
YAMAWA MFG
Optimal for center hole drilling of sticky and soft work materials.
Former JIS2 type center hole drill with weak helix groove suitable for relatively hard materials.
Days to Ship: | 16 Day(s) or more |
---|
Carbide Point Drills 60°, Coated_C-PE-S-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 10 Day(s) or more |
---|
Carbide Point Drills 90°, Coated_C-PE-Q-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 14 Day(s) or more |
---|
Joint- Carbide Point Drills 90°, Coated_JO-C-PEQ-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiAlN
· Tool material: Carbide
[Applications] Centering (positioning) / hole chamfering
Days to Ship: | 20 Day(s) or more |
---|
Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS
YAMAWA MFG
[Features]
· In order to improve the precision of the protrusion position and shank, it has a single-edge shape.
· In order to improve centripetal force, the tapered tip is made into "Three Rake" + "Thinning" shape, enabling high speed and high feed machining.
· The tapered tip uses "three rake" + "X thinning", enabling high-speed and high-feed machining.
[Applications]
· Work materials: Carbon steel, alloy steel, tool steel, cast iron, copper alloy, aluminum alloy.
Days to Ship: | 1 Day(s) or more |
---|
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
Days to Ship: | 12 Day(s) or more |
---|
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.
Days to Ship: | 16 Day(s) or more |
---|
Crystal Center Drill ZH330-TiN
RYOCO SEIKI
[Features]
· TiN coating is a highly reliable and versatile coating.
· The surface hardness is HV2,000 to 2,200, the heat-resistance temperature is around 500°C and the friction coefficient is 0.4
Days to Ship: | 16 Day(s) or more |
---|
X Coating Miniature Inner R Cutter NCR-2X
NS TOOL
[Features]
· Cutter for hardness of 55HRC or less.
tool material: super micro-grain carbide alloy
Surface treatment: X coating
Number of edges: 2 flutes
Machining applications: Curved surface chamfering
Days to Ship: | 16 Day(s) or more |
---|
Inner R Cutter DIR for Copper Electrode, Aluminum and Plastic
NS TOOL
[Features]
·Inner radius cutter for copper electrode/aluminum/plastic
tool material: super micro-grain carbide alloy
Number of edges: 2 flutes
Machining applications: Curved surface chamfering
Days to Ship: | 12 Day(s) or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Tool Material Type |
Tool Diameter (D)(mm) |
Tip angle (θ) |
Application |
work material |
Single blade, two blades |
Peripheral Blade Y/N |
Coating Y/N |
Coating Type |
R Size (R)(mm) |
Brand | OKAZAKI SEIKO | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | RYOCO SEIKI | NS TOOL | NS TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V | Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V | High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I) | Long Shank High Helix Center Drills-Type A 60°, Coated_CE-SL-V | Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V | Long Shank Low Helix Carbide Center Drills-Type A 60°_C-CD-SL | Joint- Low Helix Center Drills-Type B 60°, (Old JIS Type 2 )_JO-CDS(II) | High Helix Center Drills-Type A 60°, (Old JIS Type 1 )_CE-S(I) | Low Helix Center Drills-Type B 60°, (Old JIS Type 2 )_CD-S(II) | Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | Inner R Cutter DIR for Copper Electrode, Aluminum and Plastic | ||||||||||||||||||||||||||||||
CAD | ||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 14 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 14 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 1 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 15 Day(s) | 20 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 14 Day(s) or more | 20 Day(s) or more | 1 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more |
Specifications |
| |||||||||||||||||||||||||||||||||||||||||
Tool Material Type | Cobalt HSS | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide |
Tool Diameter (D)(mm) | 20 | 14 ~ 20 | 4 ~ 16 | 3 ~ 20 | 3 ~ 20 | 10 ~ 16 | 4 ~ 20 | 10 ~ 12 | 6 ~ 8 | 10 ~ 16 | 4 ~ 12 | 10 ~ 16 | 8 ~ 14 | 4 ~ 18 | 10 ~ 16 | 3 ~ 4 | 10 ~ 16 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 10 ~ 16 | 10 ~ 16 | 8 | 4 ~ 5 | 3.15 ~ 31.5 | 10 ~ 16 | 7.7 | 10 ~ 16 | 4 ~ 18 | 6 ~ 25 | 6 ~ 10 | 3 ~ 16 | 10 ~ 16 | 1 ~ 6 | 1 ~ 3.8 | - | 0.8 | 1.5 | 0.5 ~ 2 |
Tip angle (θ) | 90 | - | 125° | 125° | 125° | 90 | 125° | 90 | 20 ~ 30 | 90 | 90° | 60° | 60° | 90° | 60° | 125° | 90° | 60° | 60° | 60° | 90° | 60° | 60° | 60° | 60° | 60° | 90° | 60° | 60° | 60° | 60° | 60° | 60° | 125° | 125° | 90 | 60° | 90 | 90° | 60 × 120 | - | - |
Application | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Other | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) | Round Chamfer | Round Chamfer |
work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | - | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] | - | - | - | - | - | - | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[◎] |
Single blade, two blades | Single blade | - | Double-edged | Double-edged | Double-edged | Single blade | - | Single blade | Single blade | Single blade | Double-edged | Single blade | Double-edged | Double-edged | Single blade | Double-edged | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Double-edged | Double-edged | Double-edged | Single blade | Double-edged | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Double-edged | Single blade | Single blade |
Peripheral Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
Coating Y/N | Available | NA | Available | Available | Available | Available | Available | NA | NA | Available | Available | Available | Available | Available | Available | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | NA |
Coating Type | TiN | - | TiCN | TiCN | TiCN | TiCN | TiCN | - | - | TiN | TiN | TiN | TiN | TiN | TiN | - | - | TiN | TiN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | TiAlN | TiAlN | TiAlN | TiCN | TiAlN | - | TiN | TiCN | - |
R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.25 ~ 3 | 0.1 ~ 4.5 |
Loading...
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy