(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
Carbide-tipped Hole Saw for Stainless Steel
TRUSCO NAKAYAMA
[Features]
· A typical hole cutter model with tip.
· Ideal for the drilling of steel plates and stainless steel.
· Effective cutting power is 5 mm (4 mm for TTG14).
· Low-speed model recommended for holes larger than φ40 when using electric drills.
[Applications]
· Work material: Stainless steel plate, Aluminum, Steel plate, FRP, Cast iron plate, Plywood, Synthetic resin, etc.
Days to Ship: | Same day or more |
---|
OMIKOGYO
[Features]
· Recommended, for drilling thin iron plate with an electric drill.
· A safety design with no snagging.
· A safe, re-polishable and economical cutter which encounters fewer blade snags while cutting, .
Days to Ship: | 1 Day(s) or more |
---|
H.S.S High Speed Steel Hole Saw
UNIKA
[Features]
· Supports a wide range of work materials from iron plate to PVC and wood.
· Features outstanding usability.
· A wide lineup covering products with diameters from 12 mm to 170 mm to support any application.
· The blade edge has a bimetal structure which uses cobalt HSS (SKH-59).
· Cannot be used in drilling machines.
Days to Ship: | 1 Day(s) or more |
---|
Carbide Stainless Steel Hole Cutter
OMIKOGYO
[Features]
· The standard for drilling holes in stainless steel and iron plate.
· Extremely few burrs.
· A hole cutter for steel.
· High durability exhibits ideal performance particularly for stainless steel as well as iron plate.
Days to Ship: | 1 Day(s) or more |
---|
"TSL Hole Cutter" (Cobalt Bimetal)
TRUSCO NAKAYAMA
[Features]
· Its long blade length adapts to a wide range of drilling.
· It uses a unique cobalt bimetallic blade.
· With discharge spring.
· Blades with uneven pitch achieve stable cutting and smooth drilling on wood.
[Applications]
· Work material: Steel plate, Aluminum, Casting, Plywood, Gypsum board, PVC, Steel plate (3.2 mm), Stainless steel (1.0 mm), etc.
· Effective cutting capacity: Metal 3.2 mm synthetic resin, etc.
Days to Ship: | Same day or more |
---|
OMIKOGYO
[Features]
· Dual hole cutter that can be used with battery impact drills.
· Dual hole cutter of hexagonal shaft shank type.
· Adopts a 6.35 hex shaft that can be used by electric drills and battery impact drivers.
Days to Ship: | 35 Day(s) |
---|
TRUSCO NAKAYAMA
[Features]
· Has a safe design with no protruding parts, ideal for drilling iron plates.
· Ideal for drilling iron plates, galvanized plates, or tin plates.
· For electric drill use only.
[Applications]
· Work material: Steel plate (1.6 mm), Galvanized steel plate, Tin plate, etc.
· Effective cutting capacity: 1.6 mm.
Days to Ship: | 1 Day(s) |
---|
OMIKOGYO
[Features]
· An "Evolved E-Type" which can be used in drilling machines.
· Different blade tip from E-type hole cutters. Chips are discharged smoothly, making it ideal for drilling machines.
· Special blade shape produces extremely few back burrs.
Days to Ship: | 12 Day(s) or more |
---|
OMIKOGYO
[Features]
· Versatile cobalt HSS bimetal.
· Cobalt HSS + unequally spaced flutes.
· Easily enables sharp hole drilling work.
· Long flute length with stopper.
· The flange prevents cutting through when drilling.
Days to Ship: | 8 Day(s) or more |
---|
High Speed Cutter (Carbide Hall Saw)
WINNING BORE
[Features]
· Featuring an industry first 4-split chip cutting configuration.
· Enables drilling through boards of 25 mm thick stainless steel to wooden boards.
· Unusual hole saw capable of deep hole drilling in a single operation due to chip discharge mechanism.
· Secture (split) cutting effects due to the combination of blades.
· Universal carbide tip does not slip easily and is resistant to problems.
[Applications]
· This is used for work drilling into stainless steel, iron, wood, plastic, and so on.
Days to Ship: | 8 Day(s) or more |
---|
Non-Standard Pitch Hole Saw (Hole Cutter)
RIDGID
[Features]
· Exceeds the conventional standard pitch hole saw in performance and in durability.
Bimetal structure blade, using special quenched type high speed steel. Changing the blade height and the blade groove depth has increased the cutting speed and lengthened the service life.
Days to Ship: | 8 Day(s) or more |
---|
BOSCH
[Features]
· Ultra-hard tip formed by high density sintering of the highest quality powdered material. Provides ultra-long life for the load of drilling work.
· Uneven interval placement of sharply polished ultra-hard tips, and a large pocket in front of the tip, combine to provide low-vibration boring and chip discharge.
· Protects ultra-hard tips from the shock occurring when the center drill penetrates through the material, maintaining the high quality of the ultra-hard tips.
· Provides a spring that will not allow chips to enter the base after drilling.
[Applications]
· Drilling steel plate, stainless steel plate, plastic, PVC, FRP, etc. (up to 5 mm).
Days to Ship: | Quote |
---|
OMIKOGYO
[Features]
· Sharply cuts FRP, wood, and plastic.
· Uniquely developed AB split blade type.
· Sharply cuts FRP and wood fibers without creating burrs.
· Bold U-cut body.
· Chips can be removed quickly and easily.
Days to Ship: | 12 Day(s) or more |
---|
OMIKOGYO
[Features]
· Holes up to 25 mm thick can be drilled in thick stainless steel and iron plates.
· AB split blade type allows for speedy cutting and a spring helps with smooth core discharge, enabling hole drilling up to 25 mm thickness.
· The structure features an integrated shank for high cutter rigidity, zero center runout, and extremely circular hole drilling.
Days to Ship: | 1 Day(s) or more |
---|
UNIKA
[Features]
· Carbide hole saw standard type.
· Using a step center drill helps alleviate impact during center drill through cutting.
· "10 mm/13 mm chuck dual type shank" can be used for any chuck diameter. Cannot be used in drilling machines.
Days to Ship: | 1 Day(s) or more |
---|
HSS Hole Saw (Hitachi Machinery Genuine) HSS Hole Saw Electrical Work Set (for Impact Screwdriver)
HITACHIKOKI
[Features]
· Genuine Hitachi Koki hole saw.
· HSS hole saw for impact use.
· Enables drilling of thin iron plate (1.6 mm), aluminum plate (1.6 mm), FRP plate, plywood, PVC plate, acrylic plate, siding, etc.
[Applications]
· For Cordless / 100 V Impact Screwdrivers
Days to Ship: | 8 Day(s) |
---|
OMIKOGYO
[Features]
· One-touch attachment/removal type FA hole cutter
· The shank can be attached and removed in a single action and without tools.
· The shanks can be mounted to all sizes.
· Highly economic with four types, including the standard shank.
Days to Ship: | 35 Day(s) or more |
---|
Days to Ship: | Quote |
---|
MIYANAGA
Deep enough to allow drilling of curved surfaces such as pipes.
[Features]
·The body is deep and can be drilled into curved surfaces such as metal pipes.
[Applications]
·Compatible materials: metal, stainless steel.
·Materials which can be perforated: PVC pipes, metal siding boards, aluminum, spiral ducts, plastic drainage basins, FRP, synthetic resins.
Days to Ship: | 1 Day(s) or more |
---|
MIYANAGA
[Features]
· More economical through individual cutter replacement.
· Carbide blade tip, usable for drilling work materials such as stainless steel.
· Unique cutting edge design realizes excellent chip discharge.
· Excellent operability thanks to the auto lock/manual release mechanism. (S-Lock System)
Days to Ship: | 8 Day(s) or more |
---|
TRUSCO NAKAYAMA
[Features]
· Cobalt bimetallic blade (SKH 59) and uneven pitch blade achieve stable cutting without chatter and light drilling of wood.
· With discharge spring.
· Its long blade length adapts to a wide range of drilling.
· Guide drilling can be performed smoothly with a 5 mm center drill.
[Applications]
· Work material: Steel plate, Aluminum, Casting, Plywood, Gypsum board, PVC, Steel plate (3.2 mm), Stainless steel (1.0 mm).
· Effective cutting capacity: Iron plate 2 mm.
Days to Ship: | 1 Day(s) or more |
---|
H.S.S High Speed Steel Hole Saw (without Flange)
UNIKA
[Features]
· With no safety stopper (flange), it is ideal for through-hole work.
· Supports a wide range of work materials from iron plate to PVC and wood.
· Features outstanding usability and can be used up to plate thickness of 38 mm.
· Can be used with both impact and electric drills. (Only electric drills when diameter is 54 mm or more)
· The blade edge has a bimetal structure which uses cobalt HSS.
· Cannot be used in drilling machines.
Days to Ship: | 8 Day(s) or more |
---|
H.S.S High Speed Steel Hole Saw Charger
UNIKA
[Features]
· Cobalt HSS is used for the blade. High sharpness enables smooth and comfortable work.
· Blade thickness is just 0.5 mm. Cutting resistance is thoroughly suppressed, wasteful power consumption is eliminated, and the drilling amount after 1 full charge is improved.
Days to Ship: | 8 Day(s) or more |
---|
Carbide Hole Saw Metacore Triple
UNIKA
[Features]
·Adopts a 3-piece set blade that prevents chips from flying even in hard use.
·Achieves light and speedy drilling and long service life.
·With an effective length of 25 mm, it is possible to drill curved surfaces such as thick steel plates and thick metal pipes.
·The use of a step center drill mitigates the impact when the center drill penetrates.
Days to Ship: | 8 Day(s) or more |
---|
Carbide Hole Saw Metacore Rechargeable
UNIKA
[Features]
·Carbide hole saw for rechargeable drills and small electric drills (400W or less).
·Stainless steel drilling is possible with low power consumption.
·Thoroughly reduces the cutting force of the cutting edge and center drill.
·Non-impact effective length: 3.2 mm (body depth: 5 mm) Applicable motor: Rechargeable drill/electric drill (400W or less).
Days to Ship: | 8 Day(s) |
---|
Triple Carbide Long Hole Saw (Rotary)
HOUSE BM
[Features]
· Deep body cut allows drilling on curved surfaces such as sandwich plates, composite drill pipes, etc.
· Structured with flange-less stoppers, allowing for through work.
· Our unique blade installation (out/in/out) design achieves smooth sharpness not seen among conventional products.
· The blade tip (carbide tip) is 3D polished to sustain its sharpness and support drilling holes at various angles.
[Applications]
· For drilling holes in steel plate up to 12 mm, stainless steel plate, aluminum plate, iron plate siding, galvanized materials, pipes, FRP, plastic and plywood.
· Supports composite materials such as iron plate + heat shielding material + iron plate side-inch panel and OA floors with iron plate + lightweight mortar + iron plate.
Days to Ship: | 8 Day(s) or more |
---|
HOUSE BM
[Features]
Enclosure set that is very convenient for carrying and storage.
[Applications]
Cutting, etc.
Days to Ship: | 8 Day(s) or more |
---|
OMIKOGYO
[Features]
· Ultra/long service life is achieved by using a carbide tip at the cutting edge of the saw blade.
[Applications]
· Work materials: Stainless steel, ceramic siding boards, steel plates, wood.
[Material]
· Blade: Carbide Tip (Bimetal Type)
· Center Drill: High Speed Steel (SKH-51)
[Specifications]
· Pocket Depth: 27 mm
Days to Ship: | 8 Day(s) or more |
---|
Hexagonal Shank Bi-metal Hole Saw Set
LOBTEX
[Applications]
· For drilling a wide variety of materials such as thin steel plate (3.2 mm or less), stainless steel plate (1.6 mm or less), aluminum plate, lumber, resin plate, FRP, metal siding, plasterboard, artificial marble, etc.
· * For stainless steel plates only, a cordless impact screwdriver cannot be used.
[Applicable Tool]
· Electric drill (rotation only), rechargeable impact driver (φ15-35), rechargeable drill driver
[Material]
· Blade: Cobalt High Speed Steel (M42)
· Center Drill: HSS
Days to Ship: | 8 Day(s) |
---|
S-Lock Bimetal Hole Saw (for Downlight) SDS and Shank Set
MIYANAGA
[Features]
· More economical through individual cutter replacement.
· Safe work without snagging is possible for ceiling materials (plasterboard, plywood), PVC pipe, resin, plastic and other materials.
· Excellent operability thanks to the auto lock/manual release mechanism.
[Material]
· Blade: High Speed Steel (M42)
Days to Ship: | 8 Day(s) or more |
---|
OMIKOGYO
[Features]
· One blow and it's through composite material, single plate material, or nailed wood.
· Patented overlapping cutting edge shape.
· Can drill through holes even in wood with nails in it or when "there might be metal on the opposite side".
· One-touch attachment/removal type.
· Cutters and shanks are attachable/detachable with one touch and chips can be discharged easily (attachable/detachable without a tool).
· The shanks are applicable with all sizes.
· Four types of shank can be mounted, including the standard shank.
Days to Ship: | 1 Day(s) or more |
---|
Diamond Cutter for Porcelain Tile
OMIKOGYO
[Features]
· Use the center pin and a sponge (for water) for easy cutting of porcelain tiles.
· A center pin and water supply sponge system.
· Using the center pin and a sponge for water allows an appropriate level of water supply to the diamond.
Days to Ship: | 35 Day(s) |
---|
OMIKOGYO
[Features]
· Flangeless long & 6.35 hexagonal shaft shank.
· Flangeless long through type.
· "Flangeless Long Type" hole cutter born from the through-hole series while keeping the features of CL hole cutters.
· The internal step has been removed and the effective cutting capacity has increased to 38 mm.
· Supports use with battery impact drills and electric drills.
Days to Ship: | 35 Day(s) |
---|
OMIKOGYO
[Features]
· Hole cutter for plastic catch basins featuring a thin blade with excellent sharpness.
· Cobalt HSS + unequally spaced flutes.
· Prevents generation of heat due to resistance in drilling and provides accurate holes.
· Includes a spring for evacuating cores.
· Cores can be discharged smoothly.
Days to Ship: | 8 Day(s) or more |
---|
OMIKOGYO
[Features]
· Patented blade type that prevents bite-in.
· Hole cutter for pipes.
· The structure features an integrated shank for high cutter rigidity.
· Features zero center runout and extremely circular hole drilling.
· Patented blade shape enables smooth work.
· Patented blade type that prevents bite-in, allowing for intermittent drilling of pipe.
· Also enables smooth cutting work without blade snags or chipping.
Days to Ship: | 8 Day(s) or more |
---|
OMIKOGYO
[Features]
· Can also be used as a small diameter FRP hole cutter.
· The industry's best handheld drill.
· It has a unique blade configuration where the outer diameter is sharpened, enabling cutting without producing burrs.
· Precise centering point.
· Adopts a precise centering point to eliminate the troubles encountered conventionally.
Days to Ship: | 35 Day(s) |
---|
High Speed Cutter (Super Hard Hole Saws) Cobalt Drill for WBH
WINNING BORE
[Features]
Blade tip diameter φ6
Days to Ship: | 8 Day(s) |
---|
High Speed Cutter (Carbide Hall Saw) Long Type
WINNING BORE
[Features]
High Speed Cutter (Carbide Hole Saw) Long Type
Days to Ship: | 1 Day(s) or more |
---|
WINNING BORE
[Features]
Thin blade type (M42) with 0.8 mm blade tip thickness that ensures sharp cutting and long operation life. For drilling iron plate (3.2 mm or less), woodwork, PVC, plastic, etc.
Days to Ship: | 8 Day(s) or more |
---|
SHIBUYA
SHIBUYA Diamond Bit.
[Features]
· Bits with nominal diameter of 56 mm have inner diameter of 50 mm, and bits with nominal diameter of 106 mm have inner diameter of 100 mm and effective length of 300 mm for sampling iron and cores (test piece).
· Additional thin diamond segments are used for bits with a nominal diameter of 100 mm or more. (Excluding 106 mm)
· C lot screw types are also available.
Days to Ship: | Quote |
---|
BOSCH
[Features]
· For drilling holes in a variety of wall materials such as 2 x 4 planks and siding sheet.
· Unique cutting edge shape simultaneously cuts without nails getting jammed.
· Ultra-long service life with adoption of high quality carbide tip.
· Hardening treated, there is no warping, torsion, or other distortion.
· Unique cutting edge shape simultaneously cuts without nails getting jammed.
· For drilling metal siding, ceramic siding, wood, laminated wood, slate, PVC, artificial marble, FRP, etc.
· Up to 130 mm.
Days to Ship: | 8 Day(s) or more |
---|
Straight Shank for Bi-Metal Hole Saw Electric Drill
BOSCH
[Features] Bimetal structure with excellent cutting ability. Achieves a sharp cutting feel with a bimetal structure in which a high-grade cobalt HSS SKH-59 (M42) cutting edge is welded with electron beam welding to tough spring steel.
· Can be mounted onto an impact screwdriver with one touch.
· Hexagonal shank (width across flats 6.35 mm) enables one-touch attachment to rechargeable impact screwdriver.
Days to Ship: | 1 Day(s) or more |
---|
Battery Operated Bimetal Hole Saw (Circular)
BOSCH
[Features]
· 0.5 mm ultra-thin blade.
· Cutting resistance is greatly reduced by adopting an extremely thin blade with blade thickness of only 0.5 mm.
· Allows even larger holes to be drilled using an existing battery tool.
· Bimetal structure with excellent cutting ability.
· Can be mounted onto an impact screwdriver with one touch.
Days to Ship: | 1 Day(s) or more |
---|
Days to Ship: | 8 Day(s) |
---|
Ultra-Hard Deep Hole Saw Cutter
BOSCH
Poly-click hole saw (blade tip).
[Features]
· Diameter 14 to 120 mm.
· Increased chip discharge efficiency with alternating inner blades and outer blades arrangement, enabling drilling into material up to a thickness of 12 mm.
· Easily drills stainless steel and has a long service life.
· Stopper supplied to secure safety when piercing through.
[Applications]
· Convenient for drilling steel plate, stainless steel plate, cast iron and synthetic resin plate.
Days to Ship: | 8 Day(s) or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Product Type |
blade diameter(mm) |
shank diameter(mm) |
Blade thickness(mm) |
Brand | TRUSCO NAKAYAMA | OMIKOGYO | UNIKA | OMIKOGYO | TRUSCO NAKAYAMA | OMIKOGYO | TRUSCO NAKAYAMA | OMIKOGYO | OMIKOGYO | WINNING BORE | RIDGID | BOSCH | OMIKOGYO | OMIKOGYO | UNIKA | HITACHIKOKI | OMIKOGYO | SHIBUYA | MIYANAGA | MIYANAGA | TRUSCO NAKAYAMA | UNIKA | UNIKA | UNIKA | UNIKA | HOUSE BM | HOUSE BM | OMIKOGYO | LOBTEX | MIYANAGA | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | WINNING BORE | WINNING BORE | WINNING BORE | SHIBUYA | BOSCH | BOSCH | BOSCH | BOSCH | BOSCH |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | HSS Hole Saw (Hitachi Machinery Genuine) HSS Hole Saw Electrical Work Set (for Impact Screwdriver) | High Speed Cutter (Super Hard Hole Saws) Cobalt Drill for WBH | |||||||||||||||||||||||||||||||||||||||||||
Days to Ship | Same day or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | Same day or more | 35 Day(s) | 1 Day(s) | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Quote | 12 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 35 Day(s) or more | Quote | 1 Day(s) or more | 8 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 1 Day(s) or more | 35 Day(s) | 35 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 35 Day(s) | 8 Day(s) | 1 Day(s) or more | 8 Day(s) or more | Quote | 8 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 8 Day(s) or more |
Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Product Type | Other | Hole saw | Other | Other | Bimetal Hole Saw | Hole saw | Hole saw | Hole saw | Hole saw | Other | Hole saw | Hole saw | Hole saw | Hole saw | Other | Other | Hole saw | Other | - | - | Hole saw | Other | Other | Other | Other | Other | Bimetal Hole Saw | Bimetal Hole Saw | Bimetal Hole Saw | - | Hole saw | Other | Hole saw | Hole saw | Other | Other | Other | Other | Bimetal Hole Saw | Other | Hole saw | Bimetal Hole Saw | Other | Other | Hole saw |
blade diameter(mm) | 14 ~ 150 | 10.5 ~ 150 | 12 ~ 100 | 14 ~ 150 | 12 ~ 150 | 21 ~ 38 | 10.5 ~ 150 | 12 ~ 80 | 12 ~ 150 | 14 ~ 100 | - | 42 | 20 ~ 150 | 15 ~ 100 | 14 ~ 100 | - | 15 ~ 55 | 32 ~ 180 | 22 ~ 77 | 14 ~ 65 | 15 ~ 38 | 15 ~ 38 | 12 ~ 38 | 14 ~ 90 | 16 ~ 35 | 14 ~ 210 | - | 20 ~ 38 | - | 75 ~ 150 | 28 ~ 120 | 25 ~ 50 | 21 ~ 38 | 53 ~ 173 | 15 ~ 100 | 6 ~ 13 | 6 | 20 ~ 55 | 14 ~ 55 | 32 ~ 160 | 22 ~ 210 | 12 ~ 77 | 12 ~ 38 | - | 14 ~ 120 |
shank diameter(mm) | 10 ~ 13 | - | 6 ~ 13 | - | 6 ~ 13 | - | 10 ~ 13 | - | - | 8 ~ 13 | - | 10 | - | - | 10/13 | - | - | - | 6.5 ~ 13 | - | 6.35 | 6.35 | 6.35 | 10/13 | 6.35 | 10 ~ 13 | - | - | - | - | - | - | - | - | - | - | - | 10 | 6.35 ~ 10 | - | - | 6 ~ 13 | 6.35 | - | - |
Blade thickness(mm) | 2 ~ 3 | 1.5 ~ 2.4 | - | 2 ~ 3 | 0.92 ~ 1.27 | 3 | 1.5 ~ 2.4 | 1.5 ~ 2.4 | 1.07 (The width including chip clearance is 2.07) | - | - | - | 3.5 | 2.8 | - | - | 3.1 | - | - | - | 1.07 | - | - | - | - | - | - | - | - | 1.27 | 3 | 1.75 | 0.92 | 1.27 | 2.1 | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy