Core Drills (Tip Tools)

• 

  Diamond Core Cutter

  BOSCH

  [Features]
  Threaded on its outer surface to enable smooth chip discharge.

  Days to Ship:	8 Day(s) or more

• 

  Diamond core drill (straight shank)

  TRUSCO NAKAYAMA

  [Features]
  · Suitable for electrical facilities, piping and wiring applications.
  · The product is a wet type grinding tool with electrodeposition of diamonds on the blade of a hole saw shape.
  [Applications]
  · Work material: Tile, Block, Brick, Glass, etc.
  · Applicable models: Electric drill with speed control function and power consumption of 500 W and higher (cannot be used for impact tools).

  Days to Ship:	8 Day(s)

• 

  Siding/Wood Core Drill (Rotating)

  HOUSE BM

  [Features]
  · With a blade designed for quick boring of wood and siding, comfortable work in rotation mode is possible.
  · Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
  · Includes both a straight model and an SDS type shank, allowing it to be equipped to both chuck type machines and small, lightweight SDS hammer drills.
  · The chip pocket shows outstanding balance, excellent chip discharging effect, and stable drilling ability. (For deep boring, chip discharging is necessary while performing stepped work using an electric drill.)
  · The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cutting chips without having to take apart the core drill body.
  [Applications]
  · Work materials: Siding boards (ceramic, metallic), wood (with nails), etc.

  Days to Ship:	1 Day(s) or more

• 

  Galvawood Core Cutter Guide Bar

  BOSCH

  [Features]
  · A guide bar for Galvawood core.

  Days to Ship:	8 Day(s)

• 

  Composite Material Core

  BOSCH

  [Features]
  · A hole can be punched in a single action through composite materials, such as stainless steel sheets with composite panels.
  · Ultra-long service life with adoption of high quality carbide tip.
  [Applications]
  · For stacked cutting of composite materials such as kitchen counters and unitized bathroom boards, and for drilling holes in PVC drain basins.
  [Material]
  · Blade: Carbide Tip

  Days to Ship:	8 Day(s)

• 

  Poly-clic Shank, Straight shank

  BOSCH

  Days to Ship:	8 Day(s)

• 

  Multi Diamond Core Cutter

  BOSCH

  [Features]
  Perfect for plywood walls that contain insulating material.

  Days to Ship:	8 Day(s)

• 

  DL Core Rechargeable / DL Core

  MIYANAGA

  [Features]
  · Uses unique 2-step blade with good bite to split the cutting powder on a single tip, and smoothly dispose of the cutting powder.
  · There is no hollow in the tip pocket of the cutter blade, which enables smooth drilling without snagging on the workpiece.
  · Smoothly drills holes in wood and resin with an impact drill.

  Days to Ship:	8 Day(s) or more

• 

  Poly-Click Series, Dry Type, Hyper Diamond Core Drill Bits

  MIYANAGA

  [Features]
  · It has good cuttability through the use of diamond abrasive grain for the blade edge.
  · Safe operation is possible with little snagging.
  · Cuts a wide range of materials.

  Days to Ship:	8 Day(s) or more

• 

  S-Lock Shank System

  MIYANAGA

  [Features]
  · S-lock shank related product.

  Days to Ship:	8 Day(s) or more

• 

  Diamond Core Drill (Set) for Tiles

  MIYANAGA

  [Features]
  · Ideal for drilling tiles and convenient for installing solar panels.
  · Use with wet type can further improve durability.
  [Applications]
  · Work materials: Clay roof tiles such as ceramic and black roof tiles, cement tiles, Western tiles.

  Days to Ship:	8 Day(s) or more

• 

  Poly-clic Shank, SDS-plus shank

  BOSCH

  Days to Ship:	8 Day(s)

• 

  Poly-clic Shank (for dust suction)

  BOSCH

  Days to Ship:	8 Day(s) or more

• 

  ALC Core Cutter

  BOSCH

  Poly-click core (blade tip).
  [Features]
  · Diameter 29 to 210 mm.
  · Ultra-long life with high quality carbide tip.
  · Can do a simultaneous cut without stalling even on ALC rebar.
  · Prevents work material surface cracking, enabling clean drilling.
  · Unique chip pocket shape to safely cut rebar without stalling.
  [Applications]
  · Convenient for drilling ALC plate.

  Days to Ship:	8 Day(s) or more

• 

  Center Drill

  BOSCH

  [Features]
  · For carbide deep hole saw.

  Days to Ship:	8 Day(s) or more

• 

  Center Pin

  BOSCH

  [Features]
  · Replacement material using the economical Poly-Clic system that can be attached and detached easily.

  Days to Ship:	8 Day(s)

• 

  Poly-Click Series, Core Drill Bits for ALC

  MIYANAGA

  Days to Ship:	8 Day(s)

• 

  Poly-Click Series, Poly-Click Series, Wooding Core Drill Bits

  MIYANAGA

  [Features]
  ·The unique shape of the cutting edge prevents nails from getting caught and allows for safe cutting.
  ·It is also possible to drill holes in wooden ceiling materials. (Downlight, motion sensor, fire alarm installation, etc.)

  Days to Ship:	8 Day(s)

• 

  Poly-Click Series, Galvawood Core Drill Bits

  MIYANAGA

  [Features]
  · The unique tip shape improves grip on metal.
  · The adoption of 2-stage blade enables smooth discharge of cutting chips.
  · Cuts safely without nails getting jammed.
  · Goes through even composite materials and layered planks in a single pass.
  · The use of the guide bar keeps the center hole from expanding, and it is also possible to cleanly and safely drill metal siding using Galvalume steel plate.
  · ALC (especially wet ALC) and cutting dust do not cause clogs, for smooth hole drilling.

  Days to Ship:	8 Day(s) or more

• 

  Poly-Click Series, Dry Type, Diamond Core Drill Bits

  MIYANAGA

  [Features]
  · Enables dry drilling of reinforced concrete.
  · The cutter is an external periphery thread type and features excellent chip discharge.
  · Enables dry drilling of reinforced concrete and Hume pipes.
  · Can also drill rebar (D13: 1/2").
  · Accurate positioning through use of a center pin with carbide.

  Days to Ship:	8 Day(s) or more

• 

  Poly-Click Series, Composite (High) Core Drill Bit

  MIYANAGA

  [Features]
  · For drilling in composite materials such as stainless steel plates and composite panels.
  · Unique cutting edge shape is optimal for drilling composite materials such as kitchen counters and unitized bathroom boards.
  · Ideal for drilling wooden floors.

  Days to Ship:	8 Day(s) or more

• 

  Poly-Click Series, Dry Type, Diamond Core Drill Bits for Blocks

  MIYANAGA

  [Features]
  · Enables dry drilling of extrusion molded cement, blocks, heavy-duty blocks and decorative blocks.
  · Block walls (can drill rebar up to φ10).
  · Accurate positioning through use of a center pin with carbide.
  · The cutter is an external periphery thread type and features excellent chip discharge.

  Days to Ship:	8 Day(s) or more

• 

  Poly-Click Series, Common Shank

  MIYANAGA

  Days to Ship:	8 Day(s)

• 

  Poly-Click Series, Percussion Core Bits "S core"

  MIYANAGA

  [Features]
  · Edge tip shape makes effective use of impact drill impact force and rotational force.
  · Enables clean drilling without cracking the work surface.

  Days to Ship:	8 Day(s) or more

• 

  "All-Core Drill L150 Series LV Type" (SDSplus Shank)

  SANKO TECHNO

  A simple design specialized for hole-punching performance reduces the weight. Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes. The amount of discharged chips increases dramatically, and boring workability is improved. Because the state of the remaining material can be confirmed easily, the material can be removed smoothly. Work material: Mortar, Block, Brick, Ceramic siding, Gypsum board.

  Days to Ship:	8 Day(s) or more

• 

  "All-Core Drill L150 Series LA Type" (SDSplus Shank)

  SANKO TECHNO

  A simple design specialized for hole-punching performance reduces the weight. Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes. The amount of discharged chips increases dramatically, and boring workability is improved. Because the state of the remaining material can be confirmed easily, the material can be removed smoothly. Work material: ALC panel, Gypsum board.

  Days to Ship:	8 Day(s) or more

• 

  All Core Drill L150 Series LS Type (For Rotary Drill / SDSplus Shank)

  SANKO TECHNO

  [Features]
  · A simple design specialized for hole-punching performance reduces the weight.
  · Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes.
  · The amount of discharged chips increases dramatically, and boring workability is improved.
  [Applications]
  · Work material: Ceramic/Metal siding, Gypsum board, Composite Plate, Wood, FRP, PVC pipe.
  [Specifications]
  · Applicable Model: Lightweight Hammer Drill (Rotation Mode)
  [Material]
  · Blade: Carbide Tip
  · Center Pin: Alloy Steel (Tip Part: Carbide Tip)

  Days to Ship:	8 Day(s) or more

• 

  Single Function Core Drill E&S for ALC

  UNIKA

  [Features]
  · Supports ALC characteristics. Realizes large diameter hole drilling with hard-to-cut ALC plate.
  · Features outstanding rotation force and easily cuts piano wire and 1/4" rebar along with ALC boards.
  · Material with high abrasion resistance and high toughness that exerts excellent drilling force is used for the carbide tip of the cutting edge.

  Days to Ship:	8 Day(s) or more

• 

  Single Function Core Drill E&S Multi-Type

  UNIKA

  [Features]
  · Used widely for drilling holes in siding walls, gypsum board, FRP, veneered plywood, PVC sheets, composite materials, etc.
  · Chip pocket shape bears discharge efficiency in mind, so thick plates and deep holes are drilled smoothly.

  Days to Ship:	8 Day(s)

• 

  Single Function Core Drill E&S Dry Diamond Type

  UNIKA

  [Features]
  ·Able to drill holes in reinforced concrete (cutting up to 3/4 bars) without using water.
  ·Vibration noise is also greatly reduced by the center pin method and cutting using only rotational force.
  ·Uses "10 mm/13 mm chuck combined shank" regardless of drill chuck diameter.

  Days to Ship:	8 Day(s) or more

• 

  Single Function Core Drill E&S for Impact Type

  UNIKA

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Single Function Core Drill E&S for Composite Materials

  UNIKA

  [Features]
  ·With a 2-piece set of blades leading the inner blade, it is possible to drill holes in composite materials such as metal-covered siding materials, stainless steel-covered wood, and "metal plate + insulation + plywood" in one shot.
  ·When drilling wood-based materials, chips are easily discharged, and it is possible to cut nails and cut thin iron plates in layers.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Impact Core Drill (For Lightweight Hammer Drill)

  HOUSE BM

  [Features]
  · The structure in which the power of the lightweight hammer drill is transmitted smoothly to the cutting edge enables speedy drilling.
  · With a quick change center pin (φ32 or more), accurate positioning without a guide plate is possible.

  Days to Ship:	11 Day(s) or more

• 

  Core Drill Part

  HOUSE BM

  [Features]
  · Core drill parts including shanks, center pins, etc.

  Days to Ship:	8 Day(s)

• 

  Core Drill (Rotary) for Dragon ALC

  HOUSE BM

  [Features]
  · Blade designed to support ALC materials (piano wire, rebar reinforced) achieves comfortable working in rotation mode.
  · The core outer periphery welding dragon grooves enable efficient cutting powder discharge and rapid drilling even of moist ALC material.
  · Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
  · Includes both a straight model and an SDS type shank, allowing it to be equipped to both chuck type machines and small, lightweight SDS hammer drills.
  · The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cuttings chips without having to take apart the core drill body.
  · Aluminum die cast is adopted for the core bottom. (φ55 or more) 2/3 lighter than the conventional model for enhanced workability.
  [Applications]
  · Work materials: ALC material (including rebar), gypsum boards.

  Days to Ship:	8 Day(s) or more

• 

  Dragon Diamond Core Drill (Rotary)

  HOUSE BM

  [Features]
  · Drilling reinforced concrete is possible with your rotary drills. The core body outer periphery welding dragon grooves enable efficient cutting powder discharge and rapid drilling.
  [Applications]
  · For reinforced concrete, heavy blocks, hard tiles, and hardened ceramic siding

  Days to Ship:	8 Day(s) or more

• 

  Multi Use Core Drill (for Rotation and Oscillation)

  HOUSE BM

  [Features]
  · Newly developed multiple flute type enables drilling holes in siding (ceramic, metal), ALC (with rebar), decking plate, thin iron sheets (1.2 mm or less), blocks, mortar, wood and other materials.
  · Patent pending wide tip enables easy removal of chips.
  · The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cutting chips without having to take apart the core drill body.
  · Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
  · Aluminum die cast is adopted for the core bottom.

  Days to Ship:	8 Day(s) or more

• 

  Impact Hole Saw

  MAKITA

  [Applications]
  · For drilling large diameter holes in thin iron plate, aluminum, plywood, siding, PVC plates, acrylic borads, etc.

  Days to Ship:	8 Day(s) or more

• 

  Diamond Core Drill (Dry Type) Straight Shank

  LOBTEX

  For piping for air conditioners, gas, water service, or electricity, in general to hard concrete, reinforced concrete (up to φ13 mm), ALC, etc.
  
  [Features]
  · The core (cutting scraps) can be conveniently pulled out from the top by using the simple body removal/insertion feature.
  · Sharp bonds and excellent edges with double hex tip (rebar max φ13 mm).
  · The unique tornado spiral groove forcibly discharges cutting chips.
  · Grip part comes with knurling, for safe gripping.
  · With convenient depth graduations (guideline).

  Days to Ship:	8 Day(s) or more

• 

  Diamond Core Drill (Dry Type) SDS Shank

  LOBTEX

  For piping for air conditioners, gas, water service, or electricity, in general to hard concrete, reinforced concrete (up to φ13 mm), ALC, etc.
  
  [Features]
  · The core (cutting scraps) can be conveniently pulled out from the top by using the simple body removal/insertion feature.
  · Sharp bonds and excellent edges with double hex tip (rebar max φ13 mm).
  · The unique tornado spiral groove forcibly discharges cutting chips.
  · Grip part comes with knurling, for safe gripping.
  · With convenient depth graduations (guideline).

  Days to Ship:	8 Day(s) or more

• 

  Core Drill "Yanekawara-o" (SDS shank type)

  HOUSE BM

  [Features]
  · Diamond abrasive grains ideal for drilling tiles are arranged around the cutting edge.
  · The layered diamond production method can extrude arrays of large grain diamonds, helping to prevent clogging. Therefore it realizes stable sharpness and high durability.
  · Can work smoothly without the blade getting caught.
  · It can be used for both dry and wet styles.
  [Applications]
  · Work materials: Clay tiles, Western tiles, cement tiles, porcelain tiles, artificial marble.
  [Material]
  · Blade: Industrial Diamond
  · Center Pin Tip Part: Carbide Tip
  [Compatible Models]
  · SDS lightweight hammer drill (rotation mode)

  Days to Ship:	8 Day(s)

• 

  Core Drill "Yanekawara-o" (Straight shank type)

  HOUSE BM

  [Features]
  · Diamond abrasive grains ideal for drilling tiles are arranged around the cutting edge.
  · The layered diamond production method can extrude arrays of large grain diamonds, helping to prevent clogging. Therefore it realizes stable sharpness and high durability.
  · Can work smoothly without the blade getting caught.
  · It can be used for both dry and wet styles.
  [Applications]
  · Work materials: Clay tiles, Western tiles, cement tiles, porcelain tiles, artificial marble.
  [Material]
  · Blade: Industrial Diamond
  · Center Pin Tip Part: Carbide Tip
  [Compatible Models]
  · Electric drill and impact drill (rotating mode)

  Days to Ship:	8 Day(s)

• 

  Galvawood Core Cutter Shank Assembly

  BOSCH

  [Features]
  · Shank assembly for Galvawood core cutter.
  [Specifications]
  · Usable cutter blade tip dimensions: 50-310 mm

  Days to Ship:	Quote

• 

  Galvawood Core Cutter Center Drill

  BOSCH

  [Features]
  · Center drill for Galvawood core.
  · Guide bar PCB27 is included.

  Days to Ship:	8 Day(s)

• 

  Galvawood Core Cutter

  BOSCH

  [Features]
  · Piercing the Galvalume steel sheet and wood at once.
  · The unique 2-flute blade demonstrates an outstanding grip on metals for smooth discharge of chips.
  [Applications]
  · For drilling holes in metal sidings that use Galvalume steel sheets, ceramic sidings, wood, wet ALC, etc.
  [Material]
  · Blade: Carbide Tip

  Days to Ship:	8 Day(s) or more

Loading...