Drill Bits for Electric Drilling Machines

• 

  Deltagon Bit for Vibration

  MIYANAGA

  [Features]
  · Drilling nearly perfect circles is possible.
  · Improved positioning performance.
  · 3-flute type that greatly improves workability and is affordable.
  · Incredible durability.
  · Increased hole drilling speed.
  · For pilot holes of concrete nails. (φ2.5, φ2.8)

  Days to Ship:	12 Day(s) or more

• 

  Cobalt Masamune blade【1-100 Pieces Per Package】

  ISHIHASHI

  Tip chisel has a sharp tapered cutting edge (US National Aircraft Standard) that demonstrates outstanding cutting performance with complete centripetal performance and twice as fast bite-in.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hexagonal Shaft Drill for Stainless Steel

  ONISHI MANUFACTURING

  Days to Ship:	13 Day(s) or more

• 

  Hexagonal Shaft Drill Cutter

  ONISHI MANUFACTURING

  [Features]
  · The combination of medium drill and chamfering cutter enables drilling and 90-degree chamfering to be done simultaneously with the same drill.
  · Uses HSS for minimal drill wear and long term use.
  · When the medium drill is worn, it can be replaced easily using the provided L-shaped wrench.
  [Applications]
  · Work materials: Ironwork, woodwork, aluminum.
  · For pilot holes and chamfering of ironwork, woodwork and aluminum.

  Days to Ship:	12 Day(s) or more

• 

  Hexagonal Shaft Drill for Porcelain Tile

  ONISHI MANUFACTURING

  [Features]
  · Compatible with (12 V or more) impact drills, making it ideal for drilling holes in porcelain tile.
  [Applications]
  · Work materials: Porcelain tile, interior tile, plasterboard, roofing tile, blocks, mortar.

  Days to Ship:	16 Day(s) or more

• 

  Hexagonal Shaft Drill for Iron Working

  ONISHI MANUFACTURING

  [Features]
  · Impact drill compatible hexagonal shaft ironwork drill.
  [Applications]
  · Work materials: General steel, aluminum, wood, acrylic plate.
  · Drilling iron plate, aluminum, etc.

  Days to Ship:	12 Day(s) or more

• 

  Diamond Drill for Wet Tile - Aqua-Shot

  MIYANAGA

  [Features]
  · Outstanding durability.
  · Water is supplied automatically to the cutting edge.
  · Can be used with an impact drill for easy cordless work.
  · Can be used with a 100 V electric drill.
  · Smoothly drills difficult-to-cut materials such as porcelain tiles.
  · Outstanding durability. Water is supplied automatically to the cutting edge.
  · Usable at electric drill rotation speeds from 1,000 to 3,000 rpm. Water is not supplied for other revolutions.
  · Body and shank can be easily attached/detached. Many sizes can be used.
  · Economical since only the cutter is exchanged.
  · The cutter can be replaced independently in the event that it wears down.
  · A water supply tank is built into the main body.
  · Water is supplied automatically to the cutting edge. Water supply tanks, hoses, and detent rods are not required.
  · Light work has been achieved.

  Days to Ship:	10 Day(s) or more

• 

  Deltagon Bit for Rotation

  MIYANAGA

  Can drill holes in blocks, mortar, and regular tiles with rotation alone.
  
  [Features]
  · Straight shank. (Note that blade diameter is not the same as shank diameter.)

  Days to Ship:	8 Day(s) or more

• 

  Drill for Porcelain Tile

  MIYANAGA

  [Features]
  · Cutting edge with superior sharpness and durability.
  · Adopts a specially shaped carbide tip for smooth drilling of porcelain tiles, etc.
  · Drilling porcelain tile, roof tile, granite, etc.
  · The polishing angle corresponding to the blade diameter ensures the most efficient drilling.
  · With use of water, cutting performance and durability will be further improved.

  Days to Ship:	16 Day(s) or more

• 

  Chargeable Driver Drill for Blocks and Mortar

  MIYANAGA

  [Features]
  · Can drill as-is with a rechargeable drill without having to swap out the chuck.
  · Hexagonal shaft shank (width 6.35 mm) enables direct one-touch attachment to rechargeable impact screwdriver.
  · An integrated type with reduced flare and superior durability.
  · Adopts a unique carbide tip for incredible sharpness.

  Days to Ship:	16 Day(s) or more

• 

  Chargeable Driver Drill for Tile

  MIYANAGA

  [Features]
  · The specially shaped carbide tip enables smooth drilling.
  · Can be used with rechargeable impact drills.
  · Adopts a specially shaped carbide tip for smooth drilling of tiles, etc.
  · The polishing angle corresponding to the blade diameter ensures the most efficient drilling.
  · With use of water, cutting performance and durability will be further improved.

  Days to Ship:	16 Day(s) or more

• 

  Hexagonal Shank Short Drill (Titanium Coating)【2-10 Pieces Per Package】

  MITSUTOMO

  [Features]
  · Special cutting edge increases cutting efficiency and enables smooth drilling work.
  · The short size helps prevent and enables the drilling of accurate, clean holes.
  [Applications]
  · Work materials: Iron, aluminum, stainless steel, copper, wood.
  · Hexagonal shaft shank enables one-touch attachment to electric drill.
  · Optimal for drilling (pilot holes) in iron, aluminum, stainless steel, copper, wood, resin, etc.

  Days to Ship:	17 Day(s) or more

• 

  Narrow Shaft Drill (Shank 6.5 Type)

  TRUSCO NAKAYAMA

  [Features]
  · The shank is trihedral to prevent slippage.
  · It has been given special tip thinning and does not require punch.
  · Can be used for all kinds of materials such as iron, angle, new construction material, mortar, wood, etc. Ideal for construction at factories, for outdoor work, and on construction sites.
  [Applications]
  · Work materials: General steel, soft material.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Narrow Shaft Drill (Shank 10 Type)

  TRUSCO NAKAYAMA

  [Features]
  · The shank is trihedral to prevent slippage.
  · It has been given special tip thinning and does not require punch.
  · Can be used for all kinds of materials such as iron, angle, new construction material, mortar, wood, etc. Ideal for construction at factories, for outdoor work, and on construction sites.
  [Applications]
  · Work materials: General steel, soft material.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Narrow Shaft Drill (Shank 13 Type)

  TRUSCO NAKAYAMA

  [Features]
  · The shank is trihedral to prevent slippage.
  · It has been given special tip thinning and does not require punch.
  · Can be used for all kinds of materials such as iron, angle, new construction material, mortar, wood, etc. Ideal for construction at factories, for outdoor work, and on construction sites.
  [Applications]
  · Work materials: General steel, soft material.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hex shaft drill for iron working【1-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Can be mounted onto a chargeable impact driver with one touch.
  · Since the cutting edge has been subjected to X thinning finish, it is slip resistant and capable of accurate hole drilling.
  [Applications]
  · Work materials: General steel materials, light metal, plastic, wood, ironwork, aluminum, woodwork, acrylic board.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Wet Mist Diamond Drill, One-touch Type

  MIYANAGA

  Speedily drills difficult-to-cut materials such as porcelain tiles, stone materials, and roof tiles. Water is used to increase drilling efficiency by cooling the diamond blade tip and discharging chips.
  
  [Features]
  · Body and shank can be easily replaced with one touch.
  · Since the cutter and the body are connected by screws, if there is cutting edge wear, it is possible to replace only the cutter.
  · Enables low-vibration, low-noise drilling.
  · Dust will not clog in cracks. Minimizes back surface peeling when punching through.

  Days to Ship:	10 Day(s) or more

• 

  S-Lock Shank Impact

  MIYANAGA

  [Features]
  · Can be used with the existing charge impact screwdriver (blade tip up to 35 mm).
  · It's possible to replace only the hex shaft of the shank, if it breaks due to metal fatigue or an overpowered electric motor.
  · The cutter can be attached/detached in a single action.

  Days to Ship:	16 Day(s) or more

• 

  Hexagonal Shank Cobalt HSS Steel Drill Blade Set (10-Piece Set)【10 Pieces Per Package】

  CUSTOM KOBO

  Ideal for stainless steel and hard-to-cut materials. Punches hard for drilling holes quickly. For Rotary/Charging Drills, Difficult-to-cut Materials/Stainless Steel/General Steel/Cast Iron/Light Metals

  Days to Ship:	16 Day(s) or more

• 

  Narrow Shaft Masamune Drill

  ISHIHASHI

  Unique thinning demonstrates excellent centripetal force that makes hole punching unnecessary, enables work speed more than twice the normal speed and demonstrates outstanding sharpness and durability.

  Days to Ship:	12 Day(s) or more

• 

  Hexagonal Shank Cobalt Masamune Drill【1-8 Pieces Per Package】

  ISHIHASHI

  It is perfect for drilling stainless steel. Machinability oriented design improves the bite of a drill and ensures outstanding sharpness.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hexagonal Shank Masamune Drill【1-10 Pieces Per Package】

  ISHIHASHI

  Can be attached/detached on a chargeable driver with one-touch. Uses a Masamune drill with good bite and excellent sharpness, boosting performance/operability.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hex shaft cobalt drill

  TRUSCO NAKAYAMA

  [Features]
  · Can be mounted onto a chargeable impact driver with one touch.
  · Since the cutting edge has been subjected to X thinning finish, it is slip resistant and capable of accurate hole drilling.
  [Applications]
  · Work materials: Stainless steel, standard steel material.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex shaft cobalt drill set【6-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Can be mounted onto a chargeable impact driver with one touch.
  · Since the cutting edge has been subjected to X thinning finish, it is slip resistant and capable of accurate hole drilling.
  [Applications]
  · Work materials: Stainless steel, standard steel material.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hexagon Shank Cobalt Drill (Titanium Coating)

  TOP

  [Features]
  · The blade has X-thinning finish, so it is slip resistant and accurate hole drilling is possible.
  · Hexagonal shank enables one-touch attachment to electric drill.
  [Applications]
  · Work materials: Stainless steel, iron.
  · Hexagonal shaft shank enables one-touch attachment to electric drill.
  · Optimal for drilling iron and stainless steel.
  [Material]
  · Cobalt HSS (HSS-Co)

  Days to Ship:	16 Day(s) or more

• 

  Hexagon Shank Iron Working Drill

  TOP

  [Features]
  · The blade has X-thinning finish, so it is slip resistant and accurate hole drilling is possible.
  · Hexagonal shaft shank enables one-touch attachment to electric drill.
  · Optimal for drilling (pilot holes) in iron, aluminum, copper and wood.
  · Ideal for drilling holes in narrow and deep locations.
  [Applications]
  · Work materials: Iron, aluminum, copper, wood.
  [Material]
  · High-speed steel (HSS)

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Hexagonal Shank Moonlight Drill

  BICTOOL

  [Features]
  · Can be mounted to a rechargeable impact driver in a single action.
  · Unique technology is adopted for the shape of the blade tip to achieve unbelievable sharpness.
  · Greatly improved bite, cutting performance, and cutting chip disposal.
  [Applications]
  · Work materials: Stainless steel, general steel material, light metal, pipes, etc.
  [Material]
  · Cobalt HSS (HSCO-M35)

  Days to Ship:	12 Day(s)

• 

  Brad Point Drill Bit Set

  BOSCH

  [Features]
  · Titanium-coated drill bit for wood.
  [Applications]
  · Drilling in wood.

  Days to Ship:	Quote

• 

  Spot Cutter

  RUKO

  Days to Ship:	12 Day(s) or more

• 

  Spot Cutter Short Type

  RUKO

  Days to Ship:	12 Day(s) or more

• 

  Spot Cutter (Titanium Aluminum Coated Type)

  RUKO

  [Features]
  · Holes can be drilled with high precision, suppressing core runout and burrs.
  [Applications]
  · For removing spot welding.

  Days to Ship:	8 Day(s) or more

• 

  Spot Cutter (Nitrocarburized Titanium Aluminum Coated Type)

  RUKO

  [Features]
  · Holes can be drilled with high precision, suppressing core runout and burrs.
  [Applications]
  · For removing spot welding.

  Days to Ship:	16 Day(s) or more

• 

  TRUSCO 4-Flute Glass Drill

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for making fine holes in difficult-to-cut materials such as glass and marble.
  · The 4 flutes have been thinned, which enables good engagement with the work material and smooth drilling at the determined position.
  [Applications]
  · Work material: Glass, tile, marble, concrete, etc.
  · Compatible devices: Electric drills (low-speed), hand drills

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Spot Cutter

  ISHIHASHI

  Days to Ship:	12 Day(s)

• 

  Slip Stopper Reduced Shank Masamune Drill 6.5 type

  ISHIHASHI

  Days to Ship:	8 Day(s) or more

• 

  Hexagonal Shank Drill for Stainless Steel

  ONISHI MANUFACTURING

  Days to Ship:	12 Day(s)

• 

  Cobalt Drill

  TOP

  Days to Ship:	12 Day(s)

• 

  Electric Screwdriver Taper Drill

  TOP

  Days to Ship:	12 Day(s)

• 

  Hexagonal Shank Drill

  TOP

  Days to Ship:	12 Day(s)

• 

  Hexagonal Shank Straight Drill

  TOP

  Days to Ship:	12 Day(s)

• 

  Cushion Drill

  VESSEL

  Days to Ship:	12 Day(s)

• 

  KESSAKU Drillbit for Steel

  VESSEL

  Days to Ship:	12 Day(s)

Loading...