Clamping Parts (Screw Accessories)（Page2）

• 

  Plain Clamp (S45C)

  NEW STRONG

  [Features]Materials: S 45C, Hardness: HRC35, black oxide coating finish type.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Swivel New Clamp

  NEW STRONG

  [Features]
  · A swivel is attached to both ends of the clamping surface to prevent damaging machine beds.
  · Since the swivel is plated, it does not damage the workpiece.
  · The clamp contact surface is large so the clamping force increases, enabling stable fastening. (With fastening bolt and flange nut).
  · This swivel completely fixes a workpiece at any angle.

  Days to Ship:	16 Day(s) or more

• 

  Heavy Nuts

  NEW STRONG

  [Features]
  ·S45C, HRC35, black oxide coating finish type.
  ・ Strong tightening is possible.

  Days to Ship:	8 Day(s) or more

• 

  Receiving Screw

  NEW STRONG

  [Features]
  ·Available in M12 to M20.
  ·It can be used for a wide range of fastening.

  Days to Ship:	16 Day(s) or more

• 

  Coupling Nut (Hardened HRC 23-31)

  SUPER TOOL

  [Features]
  · For joint extension of the stud bolt.

  Days to Ship:	16 Day(s) or more

• 

  Screw Support - Flat Type

  SUPER TOOL

  [Features]
  · When a steel ball is set to the cradle, it creates a contact surface with little friction, allowing for smooth adjustment with little force.

  Days to Ship:	16 Day(s) or more

• 

  Step Clamp Kit

  SUPER TOOL

  [Features]
  · Easy and convenient for workpiece mounting.
  · Includes: Step clamp (3 sizes x 1 set each), step block (3 sizes x 2 sets each), T nut/stud set (-TS)

  Days to Ship:	16 Day(s) or more

• 

  Spherical flange nut with washer

  SUPER TOOL

  [Features]
  · The material is S45C.
  · Features a black oxide finish.

  Days to Ship:	14 Day(s) or more

• 

  Plane Clamp

  NEW STRONG

  Days to Ship:	12 Day(s)

• 

  T-Slot Nut (SUS)

  NABEYA

  SUS T-slot nut.
  [Features]
  ·Materials: SUS316.
  ·Put it in the machine T-groove and use it to tighten the bolt.
  [Applications]
  ·Convenient for machining.

  Days to Ship:	14 Day(s) or more

• 

  Eye Bolt

  NABEYA

  Lifting bolt.
  [Features]
  ·Materials: SS400
  [Applications]
  ·Convenient for lifting jigs and workpieces

  Days to Ship:	14 Day(s) or more

• 

  Aligning Grip Screw (Brass)

  NABEYA

  Body: SCM440 / quenched HRC35-40 aligning grip screw (brass).

  Days to Ship:	14 Day(s) or more

• 

  Aligning Pad, A Type

  NABEYA

  An A-type aligning pad for Ball SCM435 / Ball HRC60.

  Days to Ship:	14 Day(s) or more

• 

  Coupling nut CNM series

  NABEYA

  A nut that connects and lengthens bolts. M 8 to M 30, SUS materials are also available

  Days to Ship:	14 Day(s) or more

• 

  Clamp GD Double Short

  NABEYA

  S45C/quenched HRC30±5 clamp GD double short.

  Days to Ship:	16 Day(s) or more

• 

  Clamp Bolt (Heavy duty type)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The bolt tip has been hardened. Excellent Abrasion Resistance.

  Days to Ship:	16 Day(s) or more

• 

  Gooseneck Clamp (Type H)

  NABEYA

  Since the clamp shape is Z-shaped, the tightening nut position is lowered and interference is reduced

  Days to Ship:	16 Day(s) or more

• 

  Punch Press Set

  NABEYA

  A product that includes a stud bolt, coupling nut, and flange nut. There is a lineup from M 8 to 24

  Days to Ship:	10 Day(s) or more

• 

  Spherical Flange Nut (SUS)

  NABEYA

  Made of SUS316 material / Absorbs the inclination of the bearing surface and enables proper tightening.

  Days to Ship:	16 Day(s) or more

• 

  Spherical Washer (SUS316), Concave

  NABEYA

  SUS316 has higher pitting potential than SUS304 and is excellent in corrosion resistance.

  Days to Ship:	14 Day(s) or more

• 

  Clamping Screw (GB type)

  NABEYA

  [Features]
  · Can be flexibly rotated up to 9° and reliably clamps even on a slanted surface.
  · The turnover prevention mechanism achieves reliable clamping on the flat surface of the ball.
  · SCS-GB can reliably clamp rough surfaces such as the surfaces of castings.

  Days to Ship:	14 Day(s) or more

• 

  Clamping Button (Brass)

  NABEYA

  Attached to the tip of the clamp bar, it can be used as a workpiece guard. CBS (brass) and CBJ (resin) types are suitable for soft workpieces and finished products.

  Days to Ship:	14 Day(s) or more

• 

  Clamp GL Long

  NABEYA

  The clamp bar has a long overall length. Since the tip of the clamp has a tapped hole, it can be attached to the workpiece contact surface.

  Days to Ship:	16 Day(s) or more

• 

  Bolt With Swivel Pad (S45C)

  NABEYA

  S45C/Screw: Quenched HRC30±5 bolt with swivel pad.

  Days to Ship:	8 Day(s) or more

• 

  Stud (Cone Point)

  NABEYA

  Workpiece contact surface This is a bolt with a cone point (tip angle 9°, 0°, 120°). M 12 to 16 lineup

  Days to Ship:	16 Day(s) or more

• 

  Stud Bolt (SUS316)

  NABEYA

  SUS stud bolt.
  [Features]
  · Rust-resistant SUS.
  [Application]
  · Can be used in environments where water is used.

  Days to Ship:	14 Day(s) or more

• 

  Torque Screw

  NABEYA

  Screw with adjustable thrust up to 250 N. The operation surface is knurled for easy operation

  Days to Ship:	16 Day(s) or more

• 

  Z-Clamp with Screw Holes

  NABEYA

  Since the clamp is Z-shaped, the position of the tightening nut is lowered and interference is reduced. There are tapped holes for bolts with swivel pads.

  Days to Ship:	14 Day(s) or more

• 

  Bar Screw

  NABEYA

  This is a side clamp screw. The part to be turned is T-shaped, making it easy to operate.

  Days to Ship:	14 Day(s) or more

• 

  U clamp with threaded hole

  NABEYA

  A wide range of clamping positions is possible due to the U-shaped clamp bar. There are tapped holes for bolts with swivel pads.

  Days to Ship:	16 Day(s) or more

• 

  Adjustment Screw (SUS)

  NABEYA

  This is a side clamp screw. Corrosion resistance due to material SUS316

  Days to Ship:	16 Day(s) or more

• 

  Aligning Grip Pad (Brass)

  NABEYA

  Body: SCM440 / Body: Quenched HRC35-40 aligning grip pad (brass).

  Days to Ship:	38 Day(s) or more

• 

  Key Bolt

  NABEYA

  key bolt.
  [Features]
  ·Materials: SUM22.
  ·Surface treatment: Black oxide coating.
  [Applications]
  ·Convenient for attaching and detaching fixed objects.

  Days to Ship:	14 Day(s) or more

• 

  Clamp G Straight

  NABEYA

  A wide range of clamping points can be accommodated due to the slotted hole shape of the clamp bar. With tip tapped hole shape

  Days to Ship:	16 Day(s) or more

• 

  Clamp GD Double Long

  NABEYA

  S 45C / hardening HRC 30±5 clamp GD double long.

  Days to Ship:	16 Day(s) or more

• 

  Clamp Button (Brass)

  NABEYA

  CB: SUM22/CB-S: Brass/CB-N: Nylon / CB: Quenched HRC 45 to 50 clamp button.

  Days to Ship:	16 Day(s) or more

• 

  Grub Screw

  NABEYA

  For fastening the workpiece, use assembled with levers, knobs, etc. Use it as a set with thrust pad STP. Can also be used for applications such as positioning, stoppers, etc.

  Days to Ship:	14 Day(s) or more

• 

  Thrust Pad (SGB)

  NABEYA

  Use in combination with grub screw (SGB) set. Ideal for easily scratched workpieces.

  Days to Ship:	16 Day(s) or more

• 

  Screw with Pad Type B

  NABEYA

  A clamp unit with a pad that allows for a wide installation area. Type B is made of PVC (polyvinyl chloride)

  Days to Ship:	16 Day(s) or more

• 

  Flat washer (SUS)

  NABEYA

  Flat washer (SUS) made of SUS316.

  Days to Ship:	14 Day(s) or more

• 

  Spherical Washer (SUS316), Convex

  NABEYA

  SUS316 has higher pitting potential than SUS304 and is excellent in corrosion resistance.

  Days to Ship:	14 Day(s) or more

• 

  S Nut

  NABEYA

  With a structure featuring a partial cut in the seat side screw, seat surface pressure can be uniformly applied to the outer periphery to prevent screws from becoming loose. Because resistance materials such as springs or adhesives are not used, it can be attached and removed any number of times while retaining its anti-slack effect.

  Days to Ship:	14 Day(s) or more

• 

  T-Slot Nut and Stud Set

  NABEYA

  S45C/quenched T-slot nut and stud set.

  Days to Ship:	10 Day(s) or more

• 

  Adjustable Hook Wrench

  NABEYA

  Because the compatible diameter is adjustable, a single wrench can handle multiple diameter sizes. Suitable for operation with screw jacks, clamp support screw jacks, aluminum base jacks, and magnet jacks.

  Days to Ship:	14 Day(s) or more

• 

  Adjustment Screw

  NABEYA

  Can be used for abutting workpieces, etc. Screw sizes range from M 4 to M 12, so you can choose according to the workpiece.

  Days to Ship:	14 Day(s) or more

Loading...