Lathe Jigs（Page2）

• 

  Rolling Center NCF-N

  FUTAMURA MACHINES & TOOLS

  The back of the main unit is equipped with a forcing nut that enables it to be removed from the front of the tailstock. There is a combination of angular (3) and needle bearings inside this machine to provide smooth rotation torque

  Days to Ship:	18 Day(s) or more

• 

  Rolling Center SR

  FUTAMURA MACHINES & TOOLS

  The elongation of the workpiece due to the machining heat generated during cutting is absorbed by the disc spring built in the center, so there is no distortion of the workpiece during machining, which improves finishing accuracy.

  Days to Ship:	18 Day(s) or more

• 

  Rolling Center HB

  FUTAMURA MACHINES & TOOLS

  Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type

  Days to Ship:	18 Day(s) or more

• 

  Rolling Center with RST Carbide

  FUTAMURA MACHINES & TOOLS

  External appearance, shape, and structure are the same as those of the RST type. However, the carbide alloy chip is brazed to the tip of the center. With a carbide alloy chip at the tip, it demonstrates excellent wear resistance and friction resistance.

  Days to Ship:	18 Day(s) or more

• 

  Workpiece Driving Center DK Type Fixed Jaw

  FUTAMURA MACHINES & TOOLS

  Great for cog machining, spline machining, key groove machining, and woodworking. Using this device eliminates the need for a chuck. Holds workpieces at both centers, enabling the best finish. Enables attachment and detachment of workpieces with a single touch. The forcing nut makes it easy to detach from the machine

  Days to Ship:	17 Day(s) or more

• 

  Work Driving Center HD

  FUTAMURA MACHINES & TOOLS

  Center deflection against M.T. (maximum) TIR 0.01

  Days to Ship:	17 Day(s) or more

• 

  Workpiece Driving Center HD Type Replacement Jaw

  FUTAMURA MACHINES & TOOLS

  Workpiece driving center jaw should be promptly replaced with a spare before use if worn or damaged

  Days to Ship:	18 Day(s) or more

• 

  Workpiece Driving Center Adapter

  FUTAMURA MACHINES & TOOLS

  To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight. If using a workpiece driving center, there is no need to disconnect the chuck: grip the adapter outer diameter with the chuck soft jaw. (Fully baked abrasive)

  Days to Ship:	17 Day(s) or more

• 

  Umbrella-Shaped Rotation Center BRC

  FUTAMURA MACHINES & TOOLS

  Used in lathes and cylindrical grinders. Can be used as a center push tool for machining pipe-shaped, ring-shaped, or thin objects. The inside of this device uses 3 bearing types: tapered roller bearing, thrust bearing, and ball bearing

  Days to Ship:	17 Day(s) or more

• 

  Umbrella Type Rotation Center BRN Cold Punched Nut Tailstock Support

  FUTAMURA MACHINES & TOOLS

  The diameter of the shank base (E dimension) was increased and can be removed using the forcing nut equipped on the tailstock. Load resistance performance has been increased by changing the bearing. This model is equipped with a seal

  Days to Ship:	18 Day(s) or more

• 

  Workpiece Driving Center DK Type Fixed Jaw

  FUTAMURA MACHINES & TOOLS

  Workpiece driving center jaw should be promptly replaced with a spare before use if worn or damaged

  Days to Ship:	18 Day(s) or more

• 

  Extra-Hard Tip for Lathe Center

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Days to Ship:	13 Day(s) or more

• 

  Carbide Center with NC Nut

  TAKURA KOGU

  [Features]
  · Used in lathes to eliminate the runout of machined products

  Days to Ship:	13 Day(s) or more

• 

  Carbide Live Center, A Type

  TAKURA KOGU

  [Features]
  · Carbide Type Live Center

  Days to Ship:	13 Day(s) or more

• 

  Umbrella-shaped Rotation Center

  TAKURA KOGU

  [Features]
  · The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstock

  Days to Ship:	9 Day(s) or more

• 

  Die Holder for Lathes (SET)

  TAKURA KOGU

  [Features]
  · The die holder can be used as a multipurpose holder, drill stand or tap stand, etc.

  Days to Ship:	9 Day(s) or more

• 

  High Speed Rolling Center

  KAWASHIMO

  Days to Ship:	2 Day(s) or more

• 

  Rotating Center

  NSK

  [Features]
  · Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
  [Applications]
  · Workpiece support and runout prevention.

  Days to Ship:	9 Day(s) or more

• 

  Lathe Center

  TRUSCO NAKAYAMA

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  Days to Ship:	2 Day(s) or more

• 

  Lathe Center (Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  · Carbide tip included.
  [Applications]
  · Prevents runout of workpiece.

  Days to Ship:	2 Day(s) or more

• 

  Lathe Center (Long Type, with Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  · By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
  [Applications]
  · Prevents runout of workpiece.

  Days to Ship:	2 Day(s) or more

• 

  "Half Center" (with Carbide Tip)

  TRUSCO NAKAYAMA

  [Features]
  · The tip of the lathe center has been cut so as not to touch the workpiece.
  [Applications]
  · Prevents center deflection.

  Days to Ship:	2 Day(s) or more

• 

  Umbrella-shaped Rotation Center

  TRUSCO NAKAYAMA

  [Features]
  · With bearing.
  [Applications]
  · As a tool for centering holes at the pipe center.

  Days to Ship:	9 Day(s) or more

• 

  Scroll Chuck Model (Integrated Pawl Type/Runout Adjustment)

  KOBAYASHI IRON WORKS

  Days to Ship:	Quote

• 

  3-Jaw Scroll Chuck (Integrated Jaw Type/Thin)

  KOBAYASHI IRON WORKS

  The main body is lightweight and thin and reduces interference with the cutting tool. Drill presses, index heads, milling machines, etc.

  Days to Ship:	Quote

• 

  3-Jaw Scroll Chuck (Split Jaw Type/Center Runout Adjustment)

  KOBAYASHI IRON WORKS

  Runout can be easily corrected. Indexing tables, lathes, grinding machines, etc.

  Days to Ship:	Quote

• 

  Tailstock (for CC & CS)

  NEW STRONG

  A tailstock for indexing boards. Height adjustment is possible.

  Days to Ship:	Quote

• 

  Knurled holder diamond type

  NEW STRONG

  A knurled piece for mounting on the NAK-2 knurled holder.

  Days to Ship:	9 Day(s) or more

• 

  Knurled holder straight type

  NEW STRONG

  A straight knurled piece for mounting on the NSK-2 knurled holder.

  Days to Ship:	9 Day(s) or more

• 

  Tork-Loc Collet, Arbor Drawbar Type, Standard

  TEIKOKU CHUCK

  This draw bar specification series is compatible with a broad inner diameter grasp from small diameters of φ12.7 to large diameters of φ113.4. Compared to the short series, the allowable bending is increased and it is resistant to frequent blank operation; thus, this series is recommended for short workpieces requiring restrictors (collet opening regulated type).

  Days to Ship:	17 Day(s) or more

• 

  Tork-Loc Collet, Standard

  TEIKOKU CHUCK

  This collet is compatible with the standard series of draw bar models and between-center models.
  · Has an accurate plane pair.
  · Even if the positions of the arbor and collet change, it will not be affected.
  · Additional polishing is possible when deviating from the holding range.

  Days to Ship:	17 Day(s) or more

• 

  Tork-Loc Collet, Arbor Drawbar Type, Short

  TEIKOKU CHUCK

  This draw bar specification series is designed for workpieces with short grasp widths.

  Days to Ship:	17 Day(s) or more

• 

  Tork-Loc Collet, Short

  TEIKOKU CHUCK

  This collet is compatible with the short series of draw bar models and between-center models.
  · Has an accurate plane pair.
  · Even if the positions of the arbor and collet change, it will not be affected.
  · Additional polishing is possible when deviating from the holding range.

  Days to Ship:	9 Day(s) or more

• 

  6-Jaw Scroll Chuck For Drill Polishing

  KOBAYASHI IRON WORKS

  [Features]
  · 6-jaw scroll chuck for drill polishing
  · Designed specifically for chucking when drill polishing, with a secure grip and high precision.
  · When requiring high precision in particular, use the adjustable type.

  Days to Ship:	Quote

• 

  Circular Soft Jaw【3 Pieces Per Package】

  THE CUT

  Days to Ship:	9 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF SP

  SANYOSEISAKUSYO

  With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
  [Features]
  · With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
  · 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF TP

  SANYOSEISAKUSYO

  With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
  · With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
  · 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.

  Days to Ship:	11 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  [Features]
  · Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  [Features]
  · Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP SP

  SANYOSEISAKUSYO

  Oil seal exhibits waterproofing effects while not rotating.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type).
  · Rotation follows quick-starting machines.
  · 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP TP

  SANYOSEISAKUSYO

  Oil seal exhibits waterproofing effects while not rotating.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type).
  · Rotation follows quick-starting machines.
  · 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.

  Days to Ship:	11 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  Easy to detach and attach in front with the forcing nut.
  [Features]
  · The nut fits into the same size LF type and FP type.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  Easy to detach and attach in front with the forcing nut.
  [Features]
  · The nut fits into the same size LF type and FP type.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, with Carbide, Light Torque, Waterproof Type FPA

  SANYOSEISAKUSYO

  [Features]
  · With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.

  Days to Ship:	15 Day(s) or more

• 

  NAKANE Rotating Center, Standard Type LS

  SANYOSEISAKUSYO

  Secures high rigidity and durability while maintaining slim shape.
  [Features]
  · By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
  · General purpose waterproofing is realized during rotation because there is no opening in the forward direction.
  · Optimal for threading of thin objects, etc.

  Days to Ship:	9 Day(s) or more

Loading...