Precision Machine Vises

• 

  Loctite CV Precision Machine Vise

  NABEYA

  The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

  Days to Ship:	11 Day(s) or more

• 

  Milling Vise with Rotating Base

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · The upper vise section can be rotated sideways 360°.
  · Attaches to milling machines and is mainly used for rough machining.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Precision Vise (for ultra-precision machining)

  SUPER TOOL

  [Features]
  · A precision vise for ultra-precision finishing.
  · Can be utilized for a wide range of grinding, cutting, and drilling.
  · The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw, or the lengthwise/crosswise direction (SPV80-150).
  · Sub-zero treatment minimizes aging deterioration.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Loctite Precision Machine Vise L Type

  NABEYA

  The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

  Days to Ship:	18 Day(s) or more

• 

  Air Machine Vise Type KA

  KYORITSU SEIKI

  [Features]
  · Large tightening force with our original toggle mechanism.
  · Will not loosen right away even if the air supply is cut off during use.
  · Valve removal is easy and it can also be used to remotely control other air valves.
  · Can also be used as a hand tightening vise.
  [Applications]
  · From milling work to drilling machine work.

  Days to Ship:	13 Day(s) or more

• 

  Esco precision vise

  ESCO

  You can slide and fix the jaws with just a hex key without the need to replace pins.
  No groove for clamps Accessories: Case

  Days to Ship:	16 Day(s) or more

• 

  Tool maker's vise

  NABEYA

  [Features]
  · Made of fully quenched materials, this is a precision tool that is finished by polishing.
  · The accuracy is within 5 microns in both squareness and parallelism.
  · Each machine comes with a beautiful wooden box case.

  Days to Ship:	11 Day(s) or more

• 

  Mounting Bolt Set

  NABEYA

  [Features]
  A component of Machine Vise Series · A mounting bolt.
  ·Compatible vise: LT200M,LT250M,LT-HPD80E
  ·Compatible slot width: 22 mm
  ·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)

  Days to Ship:	15 Day(s) or more

• 

  Precision Parallel Block Set

  NABEYA

  [Features]
  · The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
  · S50C type hardened to HRC46-53 with improved wear resistance.
  · Comes inside a strong wooden storage case.
  · Also sold separately.
  · By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating

  Days to Ship:	16 Day(s) or more

• 

  Loctite Quick ONE Vise

  NABEYA

  The mechanical pressure increase mechanism can easily increase the pressure in 1 rotation, with minimal effect of changing temperature on the tightening force and no tool replacement, etc., required. Easy to set the tightening force by simply turning the adjustment dial by hand. Once the tightening force is set, the structure allows operation only at that tightening force. LTFH type is a vertical/horizontal machining center type that's used with angle plate adhered.

  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise

  NABEYA

  The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.

  Days to Ship:	14 Day(s) or more

• 

  Precision Vise (Wrench Tightening Type) Quick Shift/Lift Prevention Structure Type

  TRUSCO NAKAYAMA

  [Features]
  · Precision finishing by total quenching, total grinding.
  · Precision can be retained for a long period of time in order to prevent uplift.
  · Excellent squareness and parallelism enable super-precise processing.
  [Applications]
  · It is secured to an electromagnetic chuck and used in precision machining.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Milling Vise

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · Attaches to milling machines and is mainly used for rough machining.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Stainless Steel Vise DS50

  JAPAN AUTOMATIC MACHINE

  Can be used for a wide range of cutting, grinding, and tapping requiring high precision.

  Days to Ship:	8 Day(s) or more

• 

  Free Vise (2-pc set)【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · Use this free vise if the workpiece is too large and cannot be installed on a vise, etc.
  · The base surface of the main body is processed with key groove to use step keys.

  Days to Ship:	16 Day(s) or more

• 

  Vises for Small-Size Machines VC-N Series

  KITAGAWA IRON WORKS

  [Features]
  · Can be mounted snugly to the small Class 30 machines
  · Highly rigid steel body
  · A low-floor type that provides a large machining area
  · Assembled with aluminum jaws as standard
  · The largest mouth ring opening in its class
  · The mechanical boost mechanism provides stable clamping force
  · Lifting is minimized to achieve stable machining accuracy
  · Standard parallel specification
  

  Days to Ship:	21 Day(s) or more

• 

  High Precision Screw Vise

  SAKAESEIKI

  [Features]
  · A screw type precision vise machined with high accuracy. Maximum workpiece size is 150 mm.
  · The material used is SKS-3 with a quenching hardness of HRC62°.

  Days to Ship:	12 Day(s) or more

• 

  Vise Jaw - Hardened Type / Self-Cut Type -

  MISUMI

  [Features]
  ·Jaw cap for vise whose custom dimensions that can be specified, and it can be attached to any company's vise
  ·S45C type that can be self-cut, and the aluminum type in addition to the hardening material type that can be used for a long time are available

  Days to Ship:	12 Day(s) or more

• 

  Jig Vise Jaw Plates

  NABEYA

  Optional parts for the machining vise series.

  Days to Ship:	11 Day(s) or more

• 

  Handle Joint for Loctite CV Precision Machine Vise

  NABEYA

  [Features]
  A component for Lock-Tight CV Precision Machine Vises.
  A handle joint.
  · RoHS compliant
  ·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
  ·Compatible models: Common to all CV models

  Days to Ship:	11 Day(s) or more

• 

  Loctite 5-Axis Machine Vise

  NABEYA

  Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

  Days to Ship:	11 Day(s) or more

• 

  Loctite Double Clamp Vise

  NABEYA

  Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

  Days to Ship:	19 Day(s) or more

• 

  FA Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A standard fitting for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Days to Ship:	10 Day(s) or more

• 

  Guide Block【2 Pieces Per Package】

  NABEYA

  S45C machine vise series guide block.

  Days to Ship:	10 Day(s) or more

• 

  Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise【2 Pieces Per Package】

  NABEYA

  Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

  Days to Ship:	12 Day(s) or more

• 

  Flat Jaw Plates for 5-Axis Machine Vise

  NABEYA

  [Features]
  A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
  ·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

  Days to Ship:	11 Day(s) or more

• 

  Joint bar

  NABEYA

  [Features]
  A Joint bar for Lock-Tight MC Jig Vises.
  ·Effective length: 0 mm / 150 mm

  Days to Ship:	11 Day(s) or more

• 

  2 piece vise

  NABEYA

  [Features]
  · Capable of easily clasping long objects that cannot be tightened with machine vises.
  · Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
  · Convenient for processing of mass produced products.
  · Large opening depth.

  Days to Ship:	10 Day(s) or more

• 

  Loctite MC Jig Vise

  NABEYA

  A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

  Days to Ship:	11 Day(s) or more

• 

  Loctite CV Precision Machine Vise Jaws

  NABEYA

  Standard clamp for machining vise.

  Days to Ship:	14 Day(s) or more

• 

  Work Stop

  NABEYA

  Optional parts for the machining vise series.

  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

  NABEYA

  Standard clamp (coarse) for pull-down vise (free jaw vise).

  Days to Ship:	13 Day(s) or more

• 

  Machine Vise Handle

  NABEYA

  Machine vise handle.
  [Features]
  · Machine vise replacement part.
  · Optional part for the machine vise series.
  [Application]
  · Replacement handle for the machine vise.

  Days to Ship:	13 Day(s) or more

• 

  Mold Vise

  NABEYA

  Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise Jaws

  NABEYA

  Optional parts for the machining vise series.

  Days to Ship:	10 Day(s) or more

• 

  Thin Type Parallel Block

  NABEYA

  [Features]
  · The height is designed with the jaw depth of the vise in mind.
  · A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
  · A 2-piece set.

  Days to Ship:	10 Day(s) or more

• 

  CV Vise Chip Cover

  NABEYA

  Loctite CV precise machine vise parts.

  Days to Ship:	16 Day(s) or more

• 

  FA Step Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A step jaw plate for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Days to Ship:	11 Day(s) or more

• 

  CV Vise Chip Cover Unit

  NABEYA

  Loctite CV precise machine vise parts.

  Days to Ship:	16 Day(s) or more

• 

  Jig Vise Stepped Jaw Plates

  NABEYA

  [Features]
  Optional parts for machine vise series.
  Compatible models are LT630JV.

  Days to Ship:	26 Day(s) or more

• 

  Aluminum Double Clamp Vise Cap Set

  NABEYA

  [Features]
  · A cap set for the Loctite aluminum double clamp vise.
  · 2 Movable Bodies / 1 Fixed Jaw

  Days to Ship:	30 Day(s) or more

• 

  Loctite CV Precision Machine Vise Step Jaws

  NABEYA

  Fitting for precision machine vise that prevents workpieces from floating with floating prevention mechanism, and has winder type cutting chip cover that prevents cutting chips from entering main body.

  Days to Ship:	11 Day(s) or more

• 

  Workpiece Stop for 5-Axis Machine Vise

  NABEYA

  Workpiece stop for 5-axis machine vise.

  Days to Ship:	10 Day(s) or more

• 

  Pull Down Vise Mouthpiece Fine【2 Pieces Per Package】

  NABEYA

  Standard clamp (fine) for pull-down vise (free jaw vise).

  Days to Ship:	17 Day(s) or more

Loading...