Precision Machine Vises（Page2）

• 

  Step Jaw Plates for 5-Axis Machine Vise

  NABEYA

  It is a replacement jaw for a 5-axis machine vise step that allows you to choose from 4 mounting positions for jaw, supports wide variety of workpieces, and can always be clamped center of vise.

  Days to Ship:	11 Day(s) or more

• 

  5-Axis Machine Vise Height Block Key Type

  NABEYA

  Loctite 5-axis machine vise height block (key type).

  Days to Ship:	26 Day(s) or more

• 

  Loctite Precision Machine Vise Step Jaws

  NABEYA

  Optional parts for the machining vise series.

  Days to Ship:	11 Day(s) or more

• 

  Step Jaw Plates for 5-Axis Machine Vise G

  NABEYA

  Loctite 5-axis machine vise step clamp (grid type).

  Days to Ship:	19 Day(s) or more

• 

  5-Axis Machine Vise Height Block

  NABEYA

  Loctite 5-axis machine vise height block.

  Days to Ship:	26 Day(s) or more

• 

  2 piece vise mouthpiece

  NABEYA

  It is two-piece vise fitting that is ideal for machining mass-produced products, as it can hold workpieces according to table for milling machines, shapers, boring machines, etc.

  Days to Ship:	19 Day(s) or more

• 

  Claw for Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise Main Screw

  NABEYA

  Main screw for pull-down vise (free jaw vise).

  Days to Ship:	13 Day(s) or more

• 

  Loctite Aluminum Double Clamp Vise

  NABEYA

  Two workpieces can be clamped at the same time with one vise to shorten working time. The movable part and fixed jaw are made from aluminum, and thus lightweight. Therefore, cut the soft clamp yourself before use. The movable part can be attached and detached with one touch. The main body is made of ductile cast iron with flame quenching on the sliding surface, allowing it to be used as a single clamp type by replacing with the supplied parts.

  Days to Ship:	30 Day(s) or more

• 

  Loctite Hydraulic Machine Vise Step Jaws

  NABEYA

  Optional parts for the machining vise series.

  Days to Ship:	11 Day(s) or more

• 

  Mounting Clamp Set【2 Pieces Per Package】

  NABEYA

  Mounting clamp for machining vise.

  Days to Ship:	15 Day(s) or more

• 

  5-Axis Machine Vise Parallel Stop

  NABEYA

  Loctite 5-axis machine vise parallel stop.

  Days to Ship:	11 Day(s) or more

• 

  2 piece vise handle

  NABEYA

  Handle for a two-piece vise that is ideal for machining mass-produced products, as it can hold workpieces according to table for milling machine, shapers, boring machines, etc.

  Days to Ship:	19 Day(s) or more

• 

  Loctite FA Precision Machine Vise

  NABEYA

  [Features]
  · Single units, multiple units, and connected use are possible.
  · The parallel accuracy is within 0.01.
  · The lifting prevention mechanism suppresses the lifting of workpieces.
  · Higher accuracy than the old JIS O class.
  · The body and fixed jaw are integrally molded to maintain high rigidity.
  · The sliding surface has excellent wear resistance as it has been flame quenched (HRC45).
  · The body is made of a ductile material that prevents warpage when tightened.
  · The opening is nearly doubled compared with vises of the same class, making it capable of clamping large workpieces.
  · It has a large opening depth and can securely tighten tall workpieces.

  Days to Ship:	19 Day(s) or more

• 

  Loctite MC Precision Machine Vise

  NABEYA

  When using in parallel, multiple units can be installed as it has no flange. The parallel accuracy of the parallel specification is within 0.01. Can also be used while turned sideways.

  Days to Ship:	19 Day(s) or more

• 

  Maker's Vise Wedge locking tool

  NABEYA

  [Features]
  · The accuracy is higher than the former JIS 0 class.
  · Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
  · Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
  · Back surface has a guide block so precision can be easily improved

  Days to Ship:	11 Day(s) or more

• 

  Handle Joint for Loctite FA Quick ONE Vise

  NABEYA

  Handle joint for Loctite FA Quick ONE vise.

  Days to Ship:	10 Day(s) or more

• 

  Free Vise

  NEW STRONG

  The NSS free vise features a simple construction which is safe, reliable, and sturdy for workpiece mounting, usable on a semi-permanent basis. Use this free vise if the workpiece is too large for a normal vise or mounting clamp

  Days to Ship:	44 Day(s) or more

• 

  Precision Vise (Handle Type)

  TRUSCO NAKAYAMA

  [Features]
  · High precision machining can be performed in a speedy manner.
  · Both vertical and horizontal aspects can be used, since the product is precision polished on four sides.
  · Excellent squareness and parallelism enable super-precise processing.
  [Applications]
  · It is secured to an electromagnetic chuck and used in precision machining.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Precision Vise (Handle Type) Female Thread / Shaft Set for VD Type

  TRUSCO NAKAYAMA

  [Specifications]
  ·For precision vise
  ·Materials: Carbon tool steel (SKS-93) (hardness HRC56 to 60)

  Days to Ship:	12 Day(s) or more

• 

  Precision Vise (Wrench Fastening Type) Female Thread Set for VA Type

  TRUSCO NAKAYAMA

  Precision finishing by total quenching, total grinding. Precision can be retained for long periods of time to prevent uplift. Excellent squareness and parallelism enable super-precise processing.

  Days to Ship:	35 Day(s)

• 

  Milling Vise

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · Attaches to milling machines and is mainly used for rough machining.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Milling Vise with Rotating Base

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · The upper vise section can be rotated sideways 360°.
  · Attaches to milling machines and is mainly used for rough machining.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Milling Vise Clamp Set

  TRUSCO NAKAYAMA

  A jaw set for milling vise.
  Materials: Gray cast iron (FC250)

  Days to Ship:	8 Day(s) or more

• 

  Milling Vise Handle

  TRUSCO NAKAYAMA

  Handle for milling vise.
  Materials: Gray cast iron (FC250)

  Days to Ship:	12 Day(s)

• 

  Milling Vise Shaft

  TRUSCO NAKAYAMA

  Shaft for milling vise.
  Materials: Gray cast iron (FC250)

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Drilling Machine Vise "F Type"

  TRUSCO NAKAYAMA

  [Features]
  · Cast iron, so it is unlikely to be damaged due to heavy-duty work.
  · Uses fall-prevention handlebar.

  • STOCK

  Days to Ship:	Same day or more

• 

  Precision Sign Vise L50

  JAPAN AUTOMATIC MACHINE

  [Features]
  ·Suitable for grinding that requires angle setting.
  ·Structure with angle in horizontal direction

  Days to Ship:	13 Day(s) or more

• 

  Precision Sign Vise VC100

  JAPAN AUTOMATIC MACHINE

  It has been designed such that the clamp handle is underneath the workpiece.

  Days to Ship:	18 Day(s) or more

• 

  Precision Sign Plate SP150

  JAPAN AUTOMATIC MACHINE

  The plate surface tap holes and side surface stoppers can fix workpieces of various shapes.
  

  Days to Ship:	18 Day(s) or more

• 

  Precision Stainless Steel Vise DM30-1/30-2

  JAPAN AUTOMATIC MACHINE

  This type enables stabler perpendicular machining. * DM30-2 is a detachable handle type.

  Days to Ship:	15 Day(s) or more

• 

  Precision Stainless Steel Vise DN80-1/80-2

  JAPAN AUTOMATIC MACHINE

  Can be used for a wide range of cutting, grinding, and tapping using NCs/MCs that require high precision. * DN80-2 is a detachable handle type.

  Days to Ship:	15 Day(s) or more

• 

  Precision Stainless Steel Vise DS20-1/20-2

  JAPAN AUTOMATIC MACHINE

  Large vise can be used for a wide range of cutting, grinding, and tapping using NCs/MCs that require high precision.

  Days to Ship:	26 Day(s) or more

• 

  Precision Stainless Steel Vise DS50

  JAPAN AUTOMATIC MACHINE

  Can be used for a wide range of cutting, grinding, and tapping requiring high precision.

  Days to Ship:	8 Day(s) or more

• 

  Precision Stainless Steel Vise DS80/150

  JAPAN AUTOMATIC MACHINE

  Can be used for a wide range of cutting, grinding, and tapping requiring high precision.

  Days to Ship:	15 Day(s) or more

• 

  RIKEN Precision Vise

  RIKEN KEISOKUKI

  For each of the normal, horizontal, and vertical positions, there is 5 μm accuracy for parallelism and squareness. This product has all faces fully quenched.

  Days to Ship:	15 Day(s) or more

• 

  Precision Modular Machine Vise

  GERARDI

  [Features]
  ·A steel modular vise with high-precision components within 0.02 mm.
  ·The vise mouthpiece's automatic pull-down mechanism prevents the workpiece from lifting.
  ·Attached to a milling machine, it is mainly used for roughing and finishing.

  Days to Ship:	8 Day(s) or more

• 

  Free Vise (2-pc set)【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · Use this free vise if the workpiece is too large and cannot be installed on a vise, etc.
  · The base surface of the main body is processed with key groove to use step keys.

  Days to Ship:	16 Day(s) or more

• 

  Free Vise Dedicated Mouthpiece with Rack (2-pc set)【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · Use of this jaw with dedicated rack enables stable clamping of workpieces.
  · Workpiece can be reliably pushed down and clamped, even when the fastening surface has black scale or is irregular or tilted.

  Days to Ship:	16 Day(s) or more

• 

  Level Adjustment Block

  SUPER TOOL

  [Features]
  · It moves straight up and down smoothly.
  · Built-in bearing allows level adjustments to be made with minimal force.
  · Ball swivel can be set to the desired angle.

  Days to Ship:	16 Day(s) or more

• 

  Hydraulic precision vise

  SUPER TOOL

  [Features]
  · A hydraulic precision vise for ultra-precision finishing.
  · Can be utilized for a wide range of grinding, cutting, and drilling.
  · The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw.
  · Sub-zero treatment minimizes aging deterioration.

  Days to Ship:	Quote

• 

  Air Machine Vise Type KA

  KYORITSU SEIKI

  [Features]
  · Large tightening force with our original toggle mechanism.
  · Will not loosen right away even if the air supply is cut off during use.
  · Valve removal is easy and it can also be used to remotely control other air valves.
  · Can also be used as a hand tightening vise.
  [Applications]
  · From milling work to drilling machine work.

  Days to Ship:	13 Day(s) or more

• 

  Air Machine Vise Type KB

  KYORITSU SEIKI

  [Features]
  · Cylinder diameter φ100 exposed type, with power doubled by a lever.
  · Air valve is not mounted to the main body. Operated with a standard four-way valve (aperture: 1/4).
  [Applications]
  · A pneumatic machine vise used for machining small articles.

  Days to Ship:	13 Day(s) or more

• 

  Air Machine Vise KC Type

  KYORITSU SEIKI

  [Features]
  ·Since the air valve is not attached to the main body, it can be attached anywhere for remote control.
  [Applications]
  ·Air machine vise for processing small items.

  Days to Ship:	13 Day(s) or more

• 

  vise For Drilling Machine EA525AG-100

  ESCO

  【Product Specifications】
  ・Cast iron
  ・Jaw width…100mm
  ・Max opening…95mm
  ・Weight…5.4kg

  Days to Ship:	16 Day(s) or more

Loading...