Micrometers（Page2）

• 

  Digital Linear Blade Micrometer

  NIIGATA SEIKI (SK)

  Micrometer with blade-type gauge head, usable for simple measurement of the narrow groove diameter of round objects.
  [Features]
  · The digital display is easy to see.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · Equipped with auto display off function. (Approximately 5 minutes)
  · The frame has a painted finish.
  · Includes 1 reference rod (MCD235-50BA, MCD235-50BAU).
  [Applications]
  · Thin gauge head is perfect for measuring narrow grooves.

  Days to Ship:	21 Day(s) or more

• 

  Digital Exterior Micrometer

  NIIGATA SEIKI (SK)

  A micrometer with an easy-to-see digital display.
  [Features]
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function. (Approximately 6 minutes)
  · With heatproof cover. (Excluding MCD130-125 and MCD130-150)
  · The frame has a painted finish.
  · With spherical attachment. (SR2.5)
  · Includes 1 reference rod. (Excluding MCD130-25)
  [Applications]
  · Used for measurement of external dimensions.

  Days to Ship:	18 Day(s) or more

• 

  Hub Micrometer

  NIIGATA SEIKI (SK)

  This micrometer is ideal for measuring gear hub diameter and other areas too narrow to be measured by a standard micrometer.
  [Features]
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Measurement surface has a carbide tip.
  · Includes 1 reference rod. (MC203-50H)
  [Applications]
  · Used for measurement of narrow areas such as gear hubs, pipe interior step thickness, etc.

  Days to Ship:	17 Day(s) or more

• 

  Point Micrometer

  NIIGATA SEIKI (SK)

  Micrometer that is perfect for measuring root diameters.
  [Features]
  · Acute angle gauge head is perfect for point measurement.
  · Equipped with constant pressure device. Measurement surface has a carbide tip.
  · Frame: Spheroidal graphite cast iron. Spindle: High Carbon Chromium Bearing Steel.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · It is used for measuring trough diameters like drill wave diameters.

  Days to Ship:	16 Day(s) or more

• 

  Micrometer Display

  NIIGATA SEIKI (SK)

  Extremely convenient micrometer for high-precision measurement inspections and screening inspections of small item parts, etc.
  [Features]
  · With heatproof plate.
  · Measurement surface has carbide tip
  · The dial indicator is provided with a limit needle.
  · Material consists of frame: spheroidal graphite cast iron, spindle: high carbon chromium bearing steel.
  [Applications]
  · Used for high-precision measurement inspections and screening inspections of small item parts, etc.

  Days to Ship:	16 Day(s) or more

• 

  Digital Spline Micrometer

  NIIGATA SEIKI (SK)

  Both measuring probes are slim, making this micrometer ideal for measuring the groove diameter of spline shafts.
  [Features]
  · The digital display is easy to see.
  · With constant pressure device and carbide tip on measurement surface.
  · With heatproof cover.
  · Equipped with auto display off function (after about 5 minutes).
  · The frame has a painted finish.
  [Applications]
  · Ideal for measuring grooves such as spline shafts.

  Days to Ship:	16 Day(s) or more

• 

  Digital Micrometer 79523

  SHINWASOKUTEI

  A micrometer used for the precise measurement of dimensions.
  [Features]
  · Digital display can be read at a glance.
  · Quick drive and thick thimble for speedy measurements.
  · With auto power off function which automatically switches off power after 5 minutes in the non-operational state.
  · Comes with a spherical attachment convenient for measuring pipe thickness, as well as measurement surface carbide tip.
  · ZERO setting switch makes comparison measurements easy.
  [Applications]
  · Ideal for measuring the thickness of objects.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  193 Series, Count External Micrometer M800

  MITUTOYO

  • STOCK

  Days to Ship:	1 Day(s)

• 

  323/123/223 Series Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears.
  With constant pressure device
  With reference bar for base point adjustment (Excluding measuring range 0 to 25 mm)

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  369/227/169 series Forward Motion Type Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears. The spindle is a forward motion type. Equipped with a constant pressure device. With a reference rod for reference point adjustment (excluding the measurement range of 0 to 25 mm).

  Days to Ship:	1 Day(s)

• 

  510 Series, Indicating Micrometer IDM-R

  MITUTOYO

  Ideal for the measurement of low-volume multi-model production parts. Design assumes measurement while held in the hand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with zero adjustment function. Measurement surface has a carbide alloy tip.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  523 Series, Snap Meter PSM-R

  MITUTOYO

  Ideal for measuring mass-produced parts. Design assumes measurement while mounted to a stand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with a slide type workpiece stopper optimum for measuring objects with poor stability.

  Days to Ship:	19 Day(s) or more

• 

  Digimatic Micrometer Head, 164 350 Series

  MITUTOYO

  It comes with a digital display / output. Equipped with a measurement data output terminal, which can be used to configure a statistical process control system or measurement system.

  Days to Ship:	16 Day(s) or more

• 

  Micrometer Head (Standard Shape) MHN, 150 Series

  MITUTOYO

  It comes with a measurement data output terminal, allowing the configuration of statistical process management systems and measurement systems.
  Waterproof Digimatic micrometer head with protection rating IP65.
  [Features]
  ·A general purpose type with measurement range of 25 mm.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  110 Series Micrometer Head (High-Performance Shape) MHF for Ultrafine Movement

  MITUTOYO

  A micrometer head that's capable of extremely fine adjustment.
  It has a double spindle operating mechanism and is a straight spindle type.

  Days to Ship:	35 Day(s)

• 

  Outside Micrometer (With Calibration Results / Calibration Certificate / Traceability System Image)

  NIIGATA SEIKI (SK)

  Standard type micrometer.
  
  [Features]
  · Measurement surface has a carbide tip.
  · With low-pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod (excluding MC105-25)

  Days to Ship:	25 Day(s) or more

• 

  Micrometer Stand

  TRUSCO NAKAYAMA

  [Features]
  · It shows its full potential in inspections with large amounts of measurements.
  [Applications]
  · Measurement holding instrument.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Caliper Micro Stand

  TRUSCO NAKAYAMA

  [Features]
  · Allows not only micrometers but calipers to be installed.
  · Micrometer and calipers can be mounted, improving work efficiency.
  [Applications]
  · Measurement holding instrument.

  Days to Ship:	12 Day(s)

• 

  electric micrometer small (code later)

  CITIZENSEIMITSU

  Small and ideal for insertion in equipment

  Days to Ship:	14 Day(s) or more

• 

  103 Series, Standard External Micrometer M110/OM

  MITUTOYO

  Micrometer with painting frame, a cemented carbide tip on the measuring face, and a constant-force device.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  S Line Three-point Micrometer

  NIIGATA SEIKI (SK)

  For measuring hole diameters. It comes with a constant-pressure device.

  Days to Ship:	35 Day(s)

• 

  Micrometer Stand MS-RG/MS-SG

  NIIGATA SEIKI (SK)

  Micrometer stand which enables you to hold measurement targets in your hand.
  [Features]
  · Stable, medium-weight stand with a low center of gravity.
  · With non-slip rubber feet.
  · Can be held at angles ranging from vertical position to 45°.
  · Mounting size: Outside micrometer up to 100 mm.
  [Applications]
  · Holder for outside micrometers, etc.

  Days to Ship:	16 Day(s) or more

• 

  Caliper Micro Stand NMS-1G

  NIIGATA SEIKI (SK)

  Measurement tool/measurement device to which not only a micrometer but calipers can be attached.
  [Features]
  · Stable, medium-weight stand with a low center of gravity.
  · With non-slip rubber feet.
  · Holder for outside micrometers/Vernier calipers.
  · Can be held at angles ranging from vertical position to 45°.
  [Applications]
  · Can be used as a holder for outside micrometers up to 100 mm and Vernier calipers up to 200 mm.

  Days to Ship:	19 Day(s) or more

• 

  Digital Exterior Micrometer (IP65 Equivalent)

  NIIGATA SEIKI (SK)

  Waterproof protection degree IP65 specification micrometer ideal for work sites exposed to water and cutting fluid.
  [Features]
  · Water- and dustproof digital micrometer with an IP65 waterproof rating.
  · Ideal for use in workplaces where cooling fluid, cutting fluid, or lubricant are used.
  · Measurement surface has carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function (after about 6 minutes).
  · Material: frame: spheroidal graphite cast iron, spindle: high carbon chromium bearing steel.
  [Applications]
  · Used for measurement of external dimensions.

  Days to Ship:	21 Day(s) or more

• 

  LR Micrometer

  NIIGATA SEIKI (SK)

  Micrometer which supports both right and left hands and can read both front and back sides.
  [Features]
  · Measurement surface has a carbide tip.
  · With heatproof cover.
  · Supports both right and left hands.
  · Material: Frame: Spheroidal graphite cast iron, Spindle: High carbon chromium bearing steel.
  [Applications]
  · Used for measurement of external dimensions.

  Days to Ship:	17 Day(s) or more

• 

  Micrometer Reference Rod

  NIIGATA SEIKI (SK)

  Adjustment rod essential for adjusting the reference point of outside micrometers.
  [Features]
  · Reference point adjusting rod for micrometers.
  · Main unit is made of high carbon chromium bearing steel
  · Grip: Plastic.
  [Applications]
  · Useful for adjusting reference points of outside micrometer to 25-50 or more.

  Days to Ship:	16 Day(s) or more

• 

  Kaidan Scale Micrometer Head

  NIIGATA SEIKI (SK)

  A newly-designed stepped scale which helps prevent erroneous reading. It is not used by itself, but instead used in combination with other measurement devices or as a feeding device or stopper.
  [Features]
  · A series of products with an easy-to-read stepped scale.

  Days to Ship:	17 Day(s) or more

• 

  Micrometer Head, Measurement Range 0-13 mm

  NIIGATA SEIKI (SK)

  Micrometer head that can be used as a feeder or stopper when attached to other measuring instruments.
  [Features]
  · Standard small, general use series with measurement range of 0 to 13 mm.
  · The size of spindle is φ5 (diameter 5 mm) x φ17 (diameter 17 mm).
  · Stem φ9.5 (diameter 9.5 mm) x φ9.5 (diameter 9.5 mm), thimble diameter 13 mm.
  · The thimble and other parts are made of alloy tool steel, while the spindle is made of high-carbon chrome bearing steel.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Days to Ship:	16 Day(s) or more

• 

  156 Series, Micrometer Stand MS-SB

  MITUTOYO

  [Features]
  · Stand dedicated for mounting micrometers.
  · The micrometer does not require one-handed operation, which improves workability.
  · Not easily affected by temperature changes from body temperature, resulting in stable measurement.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Micrometer Head, Measurement Range 0–25 mm

  NIIGATA SEIKI (SK)

  Micrometer head that cannot be used individually, but can be used as a feeder or stopper when combined with other measuring instruments.
  [Features]
  · Standard type with measurement range of 0 to 25 mm.
  · General purpose series.
  · Measurement surface has a carbide tip that is resistant to wear.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Days to Ship:	16 Day(s) or more

• 

  Micrometer Head, Measurement Range 0–6.5 mm

  NIIGATA SEIKI (SK)

  Micrometer head that cannot be used individually, but can be used as a feeder or stopper when combined with other measuring instruments.
  [Features]
  · Standard type with measurement range of 0 to 6.5 mm.
  · A small and lightweight series.
  · Material: Thimble, etc.: Alloy tool steel, Spindle: High carbon chromium bearing steel.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Days to Ship:	16 Day(s) or more

• 

  Digimatic Non-Rotating Spindle Micrometer

  MITUTOYO

  [Features]
  · The non-rotating spindle means that no rotational stress will be applied to the measured object.
  · Conforms to CE standards.
  [Applications]
  · For accurate measurement of outer diameters.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic U-Shaped Steel Sheet Micrometer

  MITUTOYO

  [Features]
  · With a long frame that enables deeper measurements.
  · Conforms to CE standards.
  [Applications]
  · For measuring steel sheet thickness.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Tube Micrometer

  MITUTOYO

  [Features]
  · Select the type of measuring face according to the application.
  · Conforms to CE standards.
  [Applications]
  · For measuring the thickness of small-diameter hollow tubes.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Digimatic Spline Micrometer, Tip Diameter: 2 mm

  MITUTOYO

  [Features]
  · Both faces have a small diameter for easier measuring of groove diameters, etc.
  · Conforms to CE standards.
  [Applications]
  · For measuring the groove diameter of spline shafts, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Digimatic Non-Rotating Spindle Type Tooth Thickness Micrometer

  MITUTOYO

  [Features]
  · The gear pitch measurable range is from 0.5 to 6 modules.
  [Applications]
  · Measuring the root tangent length of spur gears and helical gears.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Micrometer Stand EA525MK-10

  ESCO

  【Product Specifications】
  ・EA525ML-16, -17(P.242)Weight bases are applicable.
  ・Max. opening-12.7mm
  ・Neoprene pad (dia. 12.7mm)
  ・Angle adjustment-Tilt： 90°, Rotation： 360°
  ・Pitch circle diameter of holes-Dia. 109.5mm
  ・Opening depth-21mm
  ・Height-109mm

  Days to Ship:	16 Day(s) or more

• 

  Digital S Line Micro (IP67)

  NIIGATA SEIKI (SK)

  High-end S Line Series products designed for high performance and high functionality.
  An IP67 waterproof protection grade specification that can be used safely in areas which may come into contact with water and cutting oil.

  Days to Ship:	16 Day(s) or more

• 

  Count Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s)

• 

  Deep Throat Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Digital S Line Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	12 Day(s)

• 

  Electronic Digital Cliper-type Inside Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	1 Day(s)

• 

  Electronic Digital Deep Throat Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	35 Day(s)

• 

  Electronic Digital Micrometer with Interchangeable Anvils

  NIIGATA SEIKI (SK)

  Days to Ship:	35 Day(s) or more

• 

  Electronic Digital Small Measuring Faces Micrometer

  NIIGATA SEIKI (SK)

  Days to Ship:	35 Day(s)

Loading...