(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
Days to Ship: | 1 Day(s) |
---|
Soft Screwdriver set (With Magnet)
KTC(KYOTO TOOL)
[Features]
· Shaft material is Cr-V.
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
Days to Ship: | 1 Day(s) |
---|
Power Grip Screwdriver (Through)
TONE
[Features]
· Ergonomic design
· Designed to fit the hand for applying force easily.
Days to Ship: | 12 Day(s) |
---|
ANEX
[Features]
·Compatible with 8 mm hexagonal shaft and single-headed bits.
·Bits for manual impact drivers.
Days to Ship: | 1 Day(s) or more |
---|
Replacement Screwdriver Set DK-05 – 08
ENGINEER
Replacement screwdriver set.
[Features]
· DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
· The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
[Applications]
· Convenient for repair and maintenance work.
Days to Ship: | 1 Day(s) |
---|
Resin handle screwdriver (minus/cross penetrating, magnet included)
KTC(KYOTO TOOL)
[Features]
· It is a resin grip that is hard, durable, and prevents dirt.
· The shaft is round.
· Through-hole type.
· Shaft material is Cr-V.
[Applications]
· General purpose tool
Days to Ship: | 1 Day(s) |
---|
Megadora Tang-Thru Screwdriver No. 930
VESSEL
Easy-to-use through screwdriver that is easy to grip however you hold it.
[Features]
· The cross-recessed end firmly grips the screw.
· Through type, with a large nut.
· With a hex bolster for wrenches.
[Applications]
· For various screw fastening work.
Days to Ship: | 1 Day(s) |
---|
Standard Screwdriver No. 900, MEGADORA
VESSEL
Easy-to-use regular screwdriver that is easy to grip however you hold it.
[Features]
· The cross-recessed end is a jaw fit which firmly grips the screw.
· The knurled shaft prevents slippage of fingers and enables holes in wood or boards to be widened.
[Applications]
· For various screw fastening work.
Days to Ship: | 1 Day(s) |
---|
Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)
HIRAI KOGU
Strongly tighten or loosen by hitting the butt and pushing in a screw.
Days to Ship: | 1 Day(s) |
---|
KTC(KYOTO TOOL)
[Features]
· The ratchet mechanism enables fast turning in both directions for loosening and tightening.
· Fixing the ratchet allows it to be used as a normal screwdriver.
· 2 bits can be stored in the shaft and 6 more in the grip end for a total of 8 pieces storage.
[Applications]
· General purpose tool
Days to Ship: | 1 Day(s) |
---|
KTC(KYOTO TOOL)
[Features]
· Lightweight and easy to use product.
· Exhibits power in loosening excessively tightened screws and rusted screws.
· Shaft material is Cr-V.
Days to Ship: | 1 Day(s) |
---|
VESSEL
Through nut features a cam rotation structure. Tough shaft made of highly durable chrome vanadium steel that has been fully quenched. The cutting edge has undergone high precision black point processing.
Days to Ship: | 1 Day(s) |
---|
Wooden handle through screwdriver (with magnet)
TRUSCO NAKAYAMA
Special rust-resistant plating is applied.
Days to Ship: | 1 Day(s) |
---|
TRUSCO NAKAYAMA
The tip rotates when hit with a hammer. Comes into action when turning rusty or fixed screws.
Days to Ship: | 1 Day(s) |
---|
Power Grip Screwdriver Set PGD8
TONE
[Features]
· New form and materials provide an ergonomic driver that is easier to grip and turn.
· Parallel tip shape prevents damage to screw head slots.
· Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.
· (PGPD-002, 003) Utilizes double-structure resin in red for the Phillips head screwdriver and gray for the straight slotted screwdriver so they are distinguishable at a glance. Excellent workability.
· Tip is equipped with a strong magnet.
Days to Ship: | 1 Day(s) |
---|
TONE
A piercing square-shafted driver with a plastic grip.
[Features]
· Phillips shaft length: 150 mm, total length: 260 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 1 Day(s) |
---|
TONE
An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· This stainless steel tool is made of martensitic material that emphasizes strength, is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
Days to Ship: | 1 Day(s) |
---|
Split Grip Screwdriver (Through) YPD-003
TONE
A Phillips screwdriver with improved strength thanks to a thicker and longer shaft.
[Features]
· A screwdriver designed for power with shaft and handle fixing.
· A more powerful screwdriver.
· Through screwdriver.
· A square shaft screwdriver.
[Applications]
· Maintenance of machinery, automobiles, motorcycles, and bicycles.
Days to Ship: | Quote |
---|
Bis Breaker Screwdriver (Magnetic)
ANEX
With a special tip shape, you can rotate a stripped screw.
Days to Ship: | 1 Day(s) |
---|
Ordinary Screwdriver (With Magnet)
TRUSCO NAKAYAMA
Features a non-slip ergonomically designed grip.
It has a magnet on the tip.
Days to Ship: | 1 Day(s) |
---|
Replacement Strong Screwdriver Set【8 Pieces Per Package】
PB SWISS TOOLS
[Features]
· The joint is a foldable type that can be used straight in rapid-turning and bent by 90° when fastening forcefully.
· The grip is made of CAB (cellulose acetate butyrate) containing natural plant or cotton-based materials.
· Grip is easy on the skin, ideal for gripping, impact-resistant and easy to maintain.
· PB manufactures the handles without the use of cadmium, using a single recyclable material in order to achieve environment-friendly production.
Days to Ship: | 35 Day(s) |
---|
Wooden handle screwdriver (through, with magnet)
KTC(KYOTO TOOL)
[Features]
· Natural wooden grip which is easy on the hands.
· The shaft is round.
· Shaft material is Cr-V.
· The tip is magnetic.
[Applications]
· General purpose tool
Days to Ship: | 1 Day(s) |
---|
Days to Ship: | 1 Day(s) |
---|
Impact Screwdriver (set product)
VESSEL
Screwdriver for removing rusted screws whose cutting edge turns when tapped.
[Features]
· Left and right switching can be done with one touch.
· Easy to grip and slip-resistant soft plastic is used for the handle, designed with safety of the hand in mind.
· For heavy work.
· 12.7 mm socket is mountable by removing the bit adapter.
· Hexagonal drive with width across flats of 8 mm.
[Applications]
· For removing screws with damaged heads and rusty screws, especially convenient for firm tightening.
Days to Ship: | 1 Day(s) or more |
---|
Days to Ship: | 12 Day(s) |
---|
T-Shaped Ratchet Screwdriver Set
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Days to Ship: | 1 Day(s) |
---|
KO-KEN TOOL
[Features]
A set product, no blade magnet.
·Tip size / cross-head: No.1 / No.2 / No.3
·Tip size / straight-slot: 7,9,12 mm
·Grip pattern material: Metal
·Shaft through: N/A
·Bolster: N/A
·Case size: 215 × 80 × 47 mm
·Accessory: 4112 N,4138
Days to Ship: | 12 Day(s) |
---|
Power Grip Screwdriver Set PLPGD7
TONE
[Features]
· New form and materials provide an ergonomic driver that is easier to grip and turn.
· Parallel tip shape prevents damage to screw head slots.
· Original Phillips head screwdriver tip shape fits perfectly to prevent tip extending to the bottom of the screw head slot.
· (PGPD-002, 003) Utilizes double-structure resin in red for the Phillips head screwdriver and gray for the straight slotted screwdriver so they are distinguishable at a glance.
Excellent workability.
· Tip is equipped with a strong magnet.
· Tray size inserts inside existing tool cases.
Days to Ship: | 1 Day(s) |
---|
Long Shaft Screwdriver (Through) KLD-P
TONE
Ideal for work at places where standard long shaft screwdrivers cannot reach.
[Features]
· Cross-recessed end +No.2, total length 380 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· A through type with magnetic tip with axial length of 275 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 1 Day(s) |
---|
TONE
An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
Days to Ship: | 1 Day(s) |
---|
TONE
Square shaft through screwdriver.
[Features]
· 6-piece set. Plastic grip.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 1 Day(s) |
---|
HOZAN
Impact screwdriver with interchangeable left and right rotation.
[Features]
· Driver bit rotates at high torque when hit with a hammer, loosening rusted screws easily.
· Protective grip with collar to protect the hand holding the driver.
· A 12.7 mm square socket can be attached by removing the bit holder.
· Case included
[Applications]
· Ideal for turning screws that are difficult to loosen.
Days to Ship: | 10 Day(s) or more |
---|
Long Shaft Screwdriver Set (Through) KLD3
TONE
The overall length is as long as 380 mm, ideal for work in places not reachable by standard types. Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening. The tip has a high-strength magnet.
Days to Ship: | 35 Day(s) |
---|
BAHCO, 22-Piece Stubby Ratcheting Screwdriver Set
BAHCO
Based on ergonomics, it is easier to grip and leads to prevention of injuries. For fine work.
Days to Ship: | 1 Day(s) |
---|
BAHCO
Based on ergonomics, it is easier to grip and leads to prevention of injuries.
[Features]
· A bolster (with a hex bolt) is installed where the grip and the shaft meet, increasing the tightening torque when using a wrench and pliers in combination.
· The non-fading, bit-shape identifying color coding and symbol display applied on the shaft portion side of the grip and on the grip end allow users to recognize the bit shape almost instantly. The same tools are used to prevent racing car pit crews, for whom every second counts, from choosing the wrong tool. Allows the user to strike the grip end with a hammer, similar to using a through screwdriver.
· Adopts a small-diameter round shaft that can be easily tightened and loosened.
· The moderate length of the grip neck fits fingers well and enables quick rotation and accurate torque control.
· Handle with 3 major features. Ergo-grip, bit shapes with color-coded coatings, and symbols, with a comfortable ergo-grip inner structure for strength and robustness. The handle has a bar code.
· Designed to take advantage of the round cross section and to fit without any resistance regardless of which direction it is held.
· The surface of the anti-slip grip is corrugated for maximum comfort, and a soft high-friction material is used. Enables maximum grip even with oily hands.
· This flat part stops the screwdriver from rolling.
· Holes for display. Can also be used to prevent falls from high places by threading with a string.
· The grip end is large and round, so it allows the user to apply force when performing tightening and loosening work, without feeling any pain in the palm.
Days to Ship: | 8 Day(s) |
---|
ENGINEER
Standard-type Phillips screwdrivers and flathead screwdrivers.
[Features]
· Selection of various sizes is enabled in accordance with work applications.
[Applications]
· For work tightening and removing Phillips screws/flathead screws.
Days to Ship: | 1 Day(s) |
---|
Stubby Phosphorescent Screwdriver (Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Made of martensitic special stainless steel (high strength stainless steel (550)).
Days to Ship: | 1 Day(s) |
---|
"Superfit" ACR Heavy-duty Screwdriver (Magnetic)
ANEX
[Features]
·The shape of the tip has a structure that makes it difficult to come out (ACR (R) for the Phillips, serrated for the Slotted) to prevent the cutting edge from rising from the screw.
·With a hexagonal bolster, you can use a wrench to turn it more strongly.
Days to Ship: | 1 Day(s) |
---|
"Mag Driver 22" Screwdriver (Magnetic)
ANEX
[Features]
· With a total length of 22 mm, even narrower spaces can be supported.
· Easy removal and refitting of bit.
Days to Ship: | 1 Day(s) |
---|
ANEX
[Features]
· Wide (large) handle that makes it easy to apply force. (Handle diameter 40 mm)
· Ultra-short stubby screwdriver, which can get into even narrow spaces.
· An ultra-short tool bit is used.
[Applications]
· Work in narrow spaces.
Days to Ship: | 1 Day(s) |
---|
ANEX
[Features]
·Suitable for removing screws that require force.
·A single screwdriver can be used in two different ways: straight and T-shaped.
·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
·T shape: For initial loosening and retightening that requires force.
·Straight type: For normal screwdrivers (fast turning).
·Bit replacement formula.
·With magnet (bit).
・ With storage case.
Days to Ship: | 1 Day(s) |
---|
Ratchet driver with flexible shaft
ANEX
[Features]
· Ideal for fastening screws on corners and edges.
Days to Ship: | 1 Day(s) |
---|
"NEJIPITA Ratchet Screwdriver" (Magnetic)
ANEX
[Features]
· A single ratchet driver capable of turning 4 types of screws, (+) No.1, (+) No.2, (+) No. 3 and (-) 6.
· The ratchet mechanism makes it possible to fasten screws with one hand.
[Applications]
· For screw removal work, etc.
Days to Ship: | 1 Day(s) |
---|
Ratchet Type Mini Stubby Screwdriver
ANEX
[Features]
· Can be used in tight spaces thanks to the utilization of the Star B type ratchet mechanism.
[Applications]
· For screw removal work, etc.
Days to Ship: | 1 Day(s) |
---|
Offset Ratchet Driver (Straight Type)
ANEX
[Features]
·For screwdrivers in narrow spaces.
·Ultra-thin head 21 mm by adopting ultra-short bit.
·19 mm total length ultra-short bit.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Straight type.
[Applications]
·For work such as removing screws in narrow spaces.
Days to Ship: | 1 Day(s) |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Tip standards |
Tip size / Phillips (+) |
Tip size / flathead (-) blade width (mm) B1 |
Shaft length L (mm) |
Single Product/Set Classification |
Shaft type |
Magnet |
Shaft through |
Bolster |
Grip Type |
Tip size / flathead (-) blade thickness (mm) B2 |
(Box/Hex/Ball-Point) Width Across Flats (mm) |
(Box/Hex/Ball-Point) Width Across Flats (inch) |
Brand | ANEX | KTC(KYOTO TOOL) | TONE | ANEX | ENGINEER | KTC(KYOTO TOOL) | VESSEL | VESSEL | HIRAI KOGU | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TONE | TONE | TONE | TONE | ANEX | TRUSCO NAKAYAMA | PB SWISS TOOLS | KTC(KYOTO TOOL) | VESSEL | VESSEL | WERA | TRUSCO NAKAYAMA | KO-KEN TOOL | TONE | TONE | TONE | TONE | HOZAN | TONE | BAHCO | BAHCO | ENGINEER | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Resin handle screwdriver (minus/cross penetrating, magnet included) | Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic) | |||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 1 Day(s) | 1 Day(s) | 12 Day(s) | 1 Day(s) or more | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | Quote | 1 Day(s) | 1 Day(s) | 35 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) or more | 12 Day(s) | 1 Day(s) | 12 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 10 Day(s) or more | 35 Day(s) | 1 Day(s) | 8 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) | 1 Day(s) |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
Tip standards | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Combination | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Combination | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Combination | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination |
Tip size / Phillips (+) | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 | No.3 |
Tip size / flathead (-) blade width (mm) B1 | 10 | 5.5 ~ 8 | - | - | 5.5 | - | - | - | - | 5.5 ~ 8 | - | - | - | 8 ~ 10 | - | - | - | - | - | - | - | - | 6 | 5 ~ 10 | - | 4 ~ 7 | 7, 9, 12 | - | - | 5.5 ~ 8 | 4.9 ~ 9 | 10 | 9 | 1/4 ~ 6.5 | - | - | - | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
Shaft length L (mm) | - | 25 ~ 150 | 150 | - | - | 150 | 150 | 150 | 150 | - | - | 150 | 125 ~ 150 | - | 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2) | 153 | 150 | 150 | 150 | 150 | - | 150 | - | - | 150 | - | - | 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2) | 275 | 35 ~ 150 | 76 ~ 153 | 36 ~ 80 | 275 | - | 150 | 125 | 150 | 150 | - | - | - | - | 28 ~ 93 | - | - |
Single Product/Set Classification | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Single Item | Set Product | Set Product | Single Item / Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
Shaft type | Round | Round | Square | Square | Round | Round | Round | Round | Square | Square | Round | Round | Round | - | Square | Square | Round | Square | Round | Round | Round | Round | - | Round | Square | - | - | Square | Square | Round | Square | Square | Square | - | Round | Round | Round | Round | - | Round | Square | Round | Square | Round | Square |
Magnet | NA | Available | Available | NA | NA | Available | Available | Available | Available | NA | NA | Available | Available | NA | Available | Available | NA | NA | Available | Available | NA | Available | Available | NA | NA | - | NA | Available | Available | NA | Available | NA | Available | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | NA | NA |
Shaft through | - | Available / NA | Available | - | - | Available | Available | NA | Available | - | - | Available | Available | - | Available | Available | NA | Available | NA | NA | - | Available | - | - | NA | - | NA | Available | Available | NA | Available | - | Available | - | NA | NA | NA | Available | - | - | - | - | - | - | - |
Bolster | - | NA | Included | - | - | NA | Included | NA | NA | - | - | NA | NA | - | Included | NA | NA | NA | NA | NA | - | NA | - | - | Included | - | NA | Included | NA | NA | NA | - | NA | - | Included | NA | NA | Included | - | - | - | - | - | - | - |
Grip Type | Rubber | Rubber | Resin | - | Resin | Resin | Resin | Resin | Resin | Rubber | - | Resin | Wooden handle | Stainless Steel | Resin | Resin | Stainless Steel | Resin | Rubber | Rubber | Resin | Wooden handle | Resin | Stainless Steel | Rubber | - | Stainless Steel | Resin | Resin | Stainless Steel | Resin | Rubber | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Rubber | Stainless Steel | Stainless Steel |
Tip size / flathead (-) blade thickness (mm) B2 | 1.6 | 0.75 ~ 1.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.8 ~ 1.1 | 0.6 ~ 1 | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - |
(Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | 2.5 ~ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ~ 6 | - | - | 2.5 ~ 6 | 2.5 ~ 6 |
(Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy