Screwdrivers（Bolster：NA Page3）

• 

  Ball Screwdriver Set DK-03

  ENGINEER

  Ball screwdriver set enabling tightening from an angle of around 30°.
  [Features]
  · Tightening is possible even at about a 30° tilt thanks to the ballpoint shape.
  · The shaft is made from a high-carbon steel.
  · Surface processing of screwdriver shaft is non-electrolytic nickel plating.
  [Applications]
  · Ideal for assembly and maintenance work.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Flathead Precision Screwdriver

  ENGINEER

  Precision flathead screwdriver for small screws.
  [Features]
  · Fine knurled shaft for good workability even in deep areas.
  · A flathead screwdriver for precision small screws used for watches, cameras, glasses, etc.
  · Separately sold type of the set item.
  [Applications]
  · Tightening and removal work involving precision screws.

  Days to Ship:	1 Day(s)

• 

  Electroscopic Screwdriver DKD-01/DKD-02

  ENGINEER

  Screwdriver for low voltage and automobile spark plug electrical inspection.
  [Features]
  · With a clip, it is convenient for carrying around.
  · The built-in neon tube lights up.
  [Applications]
  · DKD-01: Ideal for conductivity and wireless communicator transmission tests.
  · DKD-02: Ideal for vehicle spark plug voltage detection.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Replacement Screwdriver

  ENGINEER

  +/- 2-WAY 2-in-1.
  
  [Features]
  · 2-in-1, Phillips and flathead 2-way screwdriver bit.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Adjustable Driver DA-40

  ENGINEER

  This is a type of adjusting screwdriver with a 3 mm tip.
  [Features]
  · 3 mm tip type with semi-fixed resistance for trimmer capacitors.
  · With a clip, it is convenient for carrying around.
  [Applications]
  · Ideal for adjusting electronic substrate circuit boards.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Adjustment Screwdriver (for High Frequency)

  ENGINEER

  This is a type of adjusting screwdriver with a 3 mm tip, which is used for high frequencies.
  [Features]
  · For high frequency.
  · 3 mm tip type with semi-fixed resistance for trimmer capacitors.
  · The tip is a tough SK material bit.
  [Applications]
  · Ideal for adjusting electronic substrate circuit boards.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screwdriver for Special Screw and for Y Type Screw

  ENGINEER

  Screwdriver supporting Y-type screws.
  [Features]
  · For special screws.
  [Applications]
  · It is possible to disassemble and repair game machines, mobile telephones, etc.
  · For work removing and tightening Y-type screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screwdriver for Special Screw and for Pentalobular Screw

  ENGINEER

  A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.
  [Features]
  ·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).
  [Applications]
  ·Ideal for tightening and removing pentalobe screws (star-shaped screws).
  ·mobile phone, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Screwdriver for Special Screw and for Line Head Screw (for LH Screw)

  ENGINEER

  Screwdriver for line head screws.
  [Features]
  · For special screws.
  [Applications]
  · For removing and tightening screws in gaming machines, game software devices, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex Driver DH

  ENGINEER

  Screwdriver with hexagonal tip.
  [Features]
  · Sizes available for any size hex socket screw.
  · The shaft is chrome-molybdenum steel.
  [Applications]
  · For tightening and removing hex socket screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex Screwdriver Set

  ENGINEER

  4-piece DK-01 and 6-piece DK-02 options are available

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pro Hold/Screwdriver, Black Oxide, Single Product, Sold Separately

  BONDHUS

  The ballpoint part is equipped with screw grasping function and the screwdriver has a comfortable grip that is easy to grasp.
  
  [Features]
  · An original nylon resin part embedded into the ballpoint side walls securely catches screws.
  · Can be used for any type of screw.
  · Also supports the use of stainless steel and plastic screws.
  · The special nylon resin used for the Pro Hold is made to withstand attachment/removal tests of thousands of times in a prescribed method.
  · Although it is equipped with the Pro Hold function, the wrench can be tilted.
  · Nonmagnetic in order to be suitable for precision equipment.
  · The bolt can be fixed to the wrench using the Pro Hold function

  Days to Ship:	12 Day(s) or more

• 

  Ball End Extra-Long Screwdriver, Black Oxide Coating, Single Product

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	1 Day(s) or more

• 

  Ballpoint Screwdriver Set

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Ballpoint Screwdriver, Imperial, 8 Piece Set

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Pro Hold® Set of 6 Pieces (Screwdriver with Screw-Gripping Function) Set

  BONDHUS

  The ballpoint part is equipped with screw grasping function and the screwdriver has a comfortable grip that is easy to grasp.
  
  [Features]
  · An original nylon resin part embedded into the ballpoint side walls securely catches screws.
  · Can be used for any type of screw.
  · Also supports the use of stainless steel and plastic screws.
  · The special nylon resin used for the Pro Hold is made to withstand attachment/removal tests of thousands of times in a prescribed method.
  · Although it is equipped with the Pro Hold function, the wrench can be tilted.
  · Nonmagnetic in order to be suitable for precision equipment.
  · The bolt can be fixed to the wrench using the Pro Hold function

  Days to Ship:	12 Day(s)

• 

  Ballpoint Long Screwdriver, Black Oxide Finish, Single Item-Sold Separately

  BONDHUS

  The comfort grip is easy to hold, and allows maximum torque to be applied with minimal force.
  
  [Features]
  · Grips designed based on ergonomics are easy to grip and can produce maximum torque with small force.
  · The grip is designed to prevent tumbling even when tilted to a maximum of 15 degrees.
  · The surface of the grip uses a material that is slip resistant, even when hands are coated in water and oil.
  · The developed ball point has a shape that makes it difficult for the wrench and screw to slip even when tilted at 25°

  Days to Ship:	12 Day(s)

• 

  Coin Screwdriver (With Rounded Tip)

  TOP

  For tightening/loosening battery fluid refill caps
  
  [Features]
  · Since it has a wide 18 mm tip with a rounded shape, work can be done on all kinds of screws with rounded slots without stripping.
  · Screwdriver handle enables easy tightening and loosening with light force.
  · TRD-45 is a stubby type (shaft length 45 mm)

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Water Faucet Screwdriver (With Wide Tip Width)

  TOP

  For cleaning/inspection, etc., of check valve with mixing faucet strainer.
  
  [Features]
  · Since it has a wide 18 mm tip, work can be done on the grooves in slotted screws without stripping.
  · TWD-45 is a stubby type (shaft length 45 mm)

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Stubby Phosphorescent Screwdriver (Magnetic)

  ANEX

  [Features]
  · Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
  · Made of martensitic special stainless steel (high strength stainless steel (550)).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Bis Breaker Screwdriver (Magnetic)

  ANEX

  With a special tip shape, you can rotate a stripped screw.

  • STOCK

  Days to Ship:	Same day or more

• 

  Slit Power Screwdriver (Electric Type With Magnet)

  ANEX

  [Features]
  · Non-slip, powerful slit shape and hexagon shape (grip end).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Slit power screwdriver (electric type/through/magnet included)

  ANEX

  [Features]
  · Non-slip, powerful slit shape and hexagon shape (grip end).
  · Includes a washer that can be hit with a hammer.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)

  ANEX

  [Features]
  · Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
  · Martensitic special stainless steel (high strength stainless steel (550)).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Split Handle Driver (Penetrating) 9210

  ANEX

  [Features]
  ·Suitable for removing spot welds, removing tiles, removing burrs, and chipping concrete.
  ·A wide grip end that prevents the hand from slipping when struck.
  ·Shock-resistant and oil-resistant resin handles are used.
  ·A convex washer that can be easily struck with a hammer.
  ·penetrating type.
  ·Magnets included.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Annex precision screwdriver

  ANEX

  Convenient for disassembling watches and eyeglasses, and for screwing precision instruments, etc.
  Comes with a rotating cap.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Superfit Precision Ball Point Screwdriver

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.
  · A precision screwdriver with a long shaft.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Superfit Precision Hexalobular Screwdriver

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Superfit Precision Box Screwdriver

  ANEX

  [Features]
  · A high-strength type with an elastomer resin handle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Screwdriver

  ANEX

  [Features]
  · A long shaft type.
  · Comes with rotating cap.
  · Acetate Resin Handle

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pencil Type Inspection Screwdriver

  ANEX

  [Features]
  · It allows the presence of voltage to be checked in general households and factories.
  · It indicates conductivity with a buzzer and LED lamp.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pencil Type LED Electric Test Auto Tester (with Cord)

  ANEX

  [Features]
  ●Adopted a long life LED, that can easily test the presence of car voltage.
  ●With large alligator clip.
  ●Does not affect electronic elements, so it is optimal for vehicle equipped with electronic circuit equipment.
  [Specification]
  ●AC Voltage (V) :-
  ●DC Voltage (V):6 to 36
  ●SPQ (piece) :6
  ●Tip: Needle Type
  ●Energizing Check, DC Polarity Determination

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Spark Testing Screwdriver (Pencil Type with LED)

  ANEX

  [Features]
  ·You can easily check whether the power supply (AC) in general households and factories is energized.
  ·Wiring continuity can be checked.
  ·An LED lamp will let you know.
  ·It has a bright LED lamp.
  ·A continuity test is also possible.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rubber Grip Screwdriver (Magnetic)

  HIRAI KOGU

  [Features]
  · Strong cushion grip enables excellent tightening force.
  · (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Cushioned Electrical Screwdriver (with Magnet)

  HIRAI KOGU

  [Features]
  · The shaft is made from the highest grade nickel-chrome-molybdenum-vanadium steel.
  · Generates powerful tightening torque, and has a strong ball cushioned grip.
  · (+)/(-) color coding that enables the grip end to also be checked.
  · ((+): Yellow, (-): red) color coding one-point design that enables the grip end to also be checked (patent pending).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Nut Driver

  HIRAI KOGU

  [Features]
  · Dedicated use for attaching and detaching hex bolts and nuts.
  [Applications]
  · For attaching and removing bolts and nuts in deep areas.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Cross Nut Wrench

  HIRAI KOGU

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Wide driver D-20

  HIRAI KOGU

  [Features]
  · Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
  · Can be used to rotate plastic screws, etc. without damaging them.
  · A square shaft type that can be clamped on with pliers or a monkey wrench.
  [Applications]
  · For automobiles, panels for trains, large buses, etc.
  · Attachment/detachment of check valve with mixing faucet strainer.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Wide Driver

  HIRAI KOGU

  [Features]
  · Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
  · Can be used to rotate plastic screws, etc. without damaging them.
  · A square shaft type that can be clamped on with pliers or a monkey wrench.
  · Can be used to rotate plastic screws such as battery screws, etc. without damaging them.
  [Applications]
  · Related to implements used in the gas / water supply.
  · For attaching/removing plastic screws from batteries, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Mighty Grip Square Shaft Screwdriver Set (Magnetic)

  HIRAI KOGU

  [Features]
  · Generates powerful tightening torque with the radial grip.
  · Because of the square shaft, a strong tightening force can be applied with a monkey wrench, etc.
  [Applications]
  · For attaching/removing screws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hook Tool (L Type)

  HIRAI KOGU

  L shape tip component, it can be used for various types of work, like debris removal and pulling out hoses.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hook Tool (Hook Type)

  HIRAI KOGU

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Precision Screwdriver

  SUNFLAG

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Spark Testing Screwdriver (LED Fitted Pencil Type)

  SUNFLAG

  [Features]
  · It allows the continuity of current to be checked in general households and factory wiring.
  · Comes with easily visible high-brightness LED lighting.
  · With safety protection cap.
  [Applications]
  · For checking cracks in wire coating and inspecting plugs.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Technical Screwdriver" (Magnetic)

  SUNFLAG

  [Features]
  · Shaft length can be adjusted in 3 steps, and can be used differently based on applications.
  [Applications]
  · For maintenance work and repairs.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...