Pullers

• 

  Bearing Puller

  TEKIRO

  • Easy to remove bearings
  • Fully adjustable jaws
  • Suitable for multiple bearings
  • Molybdenum materials

  Days to Ship:	Same day

• 

  Bearing puller set parts (inner claw) BJ series

  SUPER TOOL

  Parts for Bearing Puller Set manufactured by Super Tool (internal claw).

  Days to Ship:	16 Day(s) or more

• 

  Bearing Puller Set (powerful pro type)

  SUPER TOOL

  [Features]
  · Dedicated tool set for removing inner/outer bearing rings.
  · Steel Case provided

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Miniature Bearing Puller Set

  TOP

  [Features]
  · System puller set for extracting small bearings, changing combinations in response to usage location.
  · Jaw and intermediate plate are forged and all parts are heat treated for excellent durability.
  · It uses powerful 30° trapezoidal push screws.
  · Usable with both inner and outer rings.
  · It can be used even in places where push screws cannot be used, and is capable of easy centering

  Days to Ship:	16 Day(s) or more

• 

  2-Pronged Hydraulic Puller Set

  SUPER TOOL

  Gears, pulleys and the like that are stuck due to rust and seizure can be easily pulled out through hydraulic power.

  Days to Ship:	12 Day(s) or more

• 

  Power pusher

  SUPER TOOL

  [Features]
  · Use as shown in the figure when gears, pulleys and the like are stuck due to rust, seizure, etc.
  · The hydraulic force of the power pressure makes removal easy.
  · Multiple applications as a small, lightweight high-power jack

  Days to Ship:	16 Day(s) or more

• 

  Internal Extractor Set (12 to 40 mm)

  KUKKO

  [Features]
  A set of a slide hammer and die-cutting extractor
  

  Days to Ship:	11 Day(s) or more

• 

  Three Arm Puller

  TEKIRO

  • Suitable for pulling hubs, flanges, gears, bearings as reduction type starter motor power tools, etc.
  • Made from high-strength forged and hardened steel 3 jaws design

  Days to Ship:	Same day

• 

  3-Jaw Gear Puller

  TOP

  [Features]
  · When removing gears and pulleys, this applies pulling force evenly in 3 places so there is no need to worry about breaking or distorting parts. It also allows stable work to be performed.
  · Excluding GP3-75, there are two coupling holes on the claw that can be used to grasp wide gears and gears in deep places by changing the holes (GP3-75 is a one hole type).
  · GP3-100/GP3-150 can be used with 2 claws.
  · The push screw is a 30° fine trapezoidal screw for easy removal of gears and the like. It has a rational design and withstands heavy load

  • STOCK

  Days to Ship:	1 Day(s)

• 

  11PC Bearing puller set

  ASTRO PRODUCTS

  [Features]
  · Puller set for removing internally mounted-type bearings.
  · Supports a wide range of diameters between φ8 and φ34 mm, allowing various work applications such as bicycle wheel bearings, water pump bearings, etc.
  · As it comes with a slide hammer, it is ideal for places where it is difficult to use hard bearings or the body.
  [Applications]
  · For various work, such as wheel bearings on two-wheeled vehicles, water pump bearings, etc.

  Days to Ship:	12 Day(s)

• 

  Bearing Separator Set

  TEKIRO

  • Blow mould case
  • Easy to bring
  • Highly durable hardness

  Days to Ship:	4 Day(s)

• 

  Shock Speed Puller Part (Pin)

  SUPER TOOL

  SUPER TOOL CO., LTD. component (pin) for shock speed pullers.

  Days to Ship:	16 Day(s) or more

• 

  Bearing Puller Set Parts (slide hammer)

  SUPER TOOL

  Parts for Bearing Puller Set manufactured by Super Tool (slide hammer).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Slide Hammer Case Set (M3-M16 / with 8 Adapters)

  KUKKO

  [Features]
  · A slide hammer set for removing parts with a service tap.
  · Steel case provided.

  Days to Ship:	16 Day(s) or more

• 

  Gear Puller GP Series

  TOP

  For pulling out gears, bearings, pulleys, etc.
  
  [Features]
  · Excluding GP-75, there are two coupling holes on the claw that can be used to grasp wide gears and gears in deep places by changing the holes (GP-75 is a one hole type).
  · The push screw is a 30° fine trapezoidal screw for easy removal of gears and the like. It has a rational design and withstands heavy load

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Gear Puller G Type (Professional Heavy Duty Type)

  SUPER TOOL

  Adapter with steel ball (G4-G24) significantly reduces friction resistance.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Armature Bearing Puller

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up.
  · Ideal for pulling out small diameter bearings attached to electric tools, household appliances, cars, etc.

  • STOCK

  Days to Ship:	Same day or more

• 

  Ultra wide thin nail slide gear puller

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up.
  · Ideal for pulling out pulleys or gears where there is a limited space to hook claws.
  · The claw is a slide style device, and a cap bolt makes for ideal placement fixing.
  · ABT90L is the long-claw type.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Bearing Grip Puller Set (powerful pro type)

  SUPER TOOL

  [Features]
  · Ideal for pulling out bearings and gears which have no gaps for claws.
  · A puller set, optimal for extracting pulleys with large diameters.
  · Steel Case provided

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Bearing Push Puller Set (powerful pro type)

  SUPER TOOL

  [Features]
  · A puller set ideal for pushing and pulling bearings/gears/pulleys in deep or recessed areas.
  · Steel case provided (however, P4000 is provided with a Tri-Wall case)

  Days to Ship:	12 Day(s) or more

• 

  Bearing Separator (BS1S/2S)

  SUPER TOOL

  Heavy duty type for professionals
  
  [Features]
  · G, GL type suitable for pulling out bearings and gears which have no gaps for claws

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Bearing puller set BP15S/BP30S/BP30FS

  SUPER TOOL

  [Features]
  · Dedicated tool for removing inner bearing rings.
  · Internal jaws are chucked on the bearing's internal diameter, so after setting on the stand, the bearing can be removed simply by turning a nut

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Bearing puller set parts (inner claw) BPJ series

  SUPER TOOL

  Parts for Bearing Puller Set manufactured by Super Tool (internal claw).

  Days to Ship:	1 Day(s) or more

• 

  Bearing Puller Set Parts (stand puller)

  SUPER TOOL

  Dedicated for external ring removal, providing stable installation through setting with opening stopper (BPU6)

  Days to Ship:	Quote

• 

  Gear Puller (2-Hook Type)

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for pulling out the bearing, pulley and gear during dismantling and repairing of machinery and automobiles.
  · Dedicated tool for extracting gears and pulleys.
  

  • STOCK

  Days to Ship:	Same day or more

• 

  Steering Arm Puller, 204 Series

  KUKKO

  [Features]
  For pulling of parts such as ball bearings, gears, pinions and steering arms.
  

  Days to Ship:	11 Day(s) or more

• 

  Slide Hammer Set

  KUKKO

  [Features]
  General slide hammer set including 9 adapters.
  

  Days to Ship:	11 Day(s) or more

• 

  Universal Puller Set

  KUKKO

  [Features]
  Ideal for pulling out wheels, ball bearings, and pinion gears.
  

  Days to Ship:	9 Day(s) or more

• 

  Internal Extractor Slide Hammer, 224 Series

  KUKKO

  [Features]
  For pulling journal bearings, pilot bearings, bearing races, etc.
  

  Days to Ship:	10 Day(s) or more

• 

  Blind Bearing Puller

  ASTRO PRODUCTS

  [Features]
  · Slide hammer-type puller that supports bearings of 8 to 30 mm internal diameters.
  · This type adheres to the inside to enable use in tight spaces.
  · Similar to a puller with legs, can be removed when there is no area to secure the legs.
  · Screw-in type simple bearing and bushing puller are included.
  · Insert the attachment of each size in the bearing and turn the attached bolt.
  · Attachments fit closely to the inner surface of bearings to enable removing with the impact of a slide hammer.
  [Applications]
  · Convenient for deep and narrow spaces.

  • STOCK

  Days to Ship:	12 Day(s)

• 

  Gear Puller (Strong Type)

  KTC(KYOTO TOOL)

  By changing the claw, it is possible to use both the inner diameter side and the outer diameter side.

  Days to Ship:	8 Day(s) or more

• 

  Bearing Push Puller Set

  SUPER TOOL

  Days to Ship:	45 Day(s)

• 

  Gear Puller (Sliding Type)

  TRUSCO NAKAYAMA

  [Features]
  · Flat transfer of the claw is smooth, which leads to greater efficiency.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Gear Puller (2-Hook/3-Hook Dual Purpose Type)

  TRUSCO NAKAYAMA

  [Features]
  · Can be attached freely, with unique "hooks always close" mechanism.
  · Either 2 claws or 3 claws can be used separately to suit the application.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Steering Puller

  TOP

  [Features]
  · It is used for correcting the inclination of the steering wheel after adjusting the front wheel alignment of the automobile.
  · Steering wheel can be securely removed without the use of a plastic hammer

  Days to Ship:	16 Day(s) or more

• 

  Gear Puller GL Type (Professional Heavy Duty Type)

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up at the minimum D dimension.
  · Longer claw than G Type, with three holes enlarging the claw range.
  · One of the claws is designed to have a groove width for hook bolts (for BS).
  · Adapter with steel ball significantly reduces friction resistance

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Gear Puller GT Type (3-Hook Puller)

  SUPER TOOL

  A gear puller used for pulling pulleys.
  [Features]
  ·3 claws provide more stable load than 2 claws.
  ·Ideal for pulling out bearings, pulleys, gears, etc. in dismantling and repairing machinery and automobiles.
  ·By making the nail holes 2 holes (GT4-10) and 3 holes (GT12-18), the reach of the nail is expanded.
  ·GT100, 150, 200, 250, 12, 15 and 18 are exclusively for 3-jaw.
  ·Frictional resistance is greatly reduced by an adapter containing steel balls.
  ·The H dimension is the dimension when the D dimension is the smallest and the male thread is pulled up to the maximum.
  [Applications]
  ·Ideal for pulling out pulleys.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Gear Puller G/GT Common Parts (Hook)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Expanded range of reach with the use of 2 or 3 holes, as well as upper and lower jaws.

  Days to Ship:	Quote

• 

  Gear Puller G/GL/GT Common Parts (Adapter with Ball)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Expanded range of reach with the use of 2 or 3 holes, as well as upper and lower jaws.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Gear Puller GL Type Parts (Hook)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Longer claw than GJ Type, with three holes enlarging the claw range.

  Days to Ship:	16 Day(s) or more

• 

  Gear Puller G/GL/GT Common Parts (Washer)【1-4 Pieces Per Package】

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GZ4 through 18 are common to G and GL

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Gear Puller G/GL/GT Common Parts (Bolt/Nut)【1-4 Pieces Per Package】

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GN4 through 18 are common to G and GL

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Gear Puller G/GL/GT Common Parts (Male Screw / Female Screw)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GSR4 through 18 are common to G and GL
  · GSR 3 has no adapter

  • STOCK

  Days to Ship:	1 Day(s)

• 

  3-Hook Gear Puller GT Type Parts (Male Screw/Female Screw, With Adapter)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · 3-hook gear puller GT type component.
  · Used with bolts, nuts and washers.

  Days to Ship:	12 Day(s) or more

• 

  Slide gear puller

  SUPER TOOL

  [Features]
  · Claws can slide in parallel, effective for work in a tight space.
  · Simply re-set the claw for inner or outer hanging, which are both available.
  · The claw placement can be fixed easily with the turn of a knob.
  · With GS-M, the claw can reach a wide range, with male screws of an appropriate length, so that efficient work can be carried out.
  · Ideal particularly for disassembling motors, etc.

  • STOCK

  Days to Ship:	1 Day(s) or more

Loading...