Diamond Cutters

• 

  Scissors (Dry Type) - Red Wave Type

  GOEI

  [Features]
  ·The wave creates an ideal cut.
  ·It is also possible to cut granite.
  [Applications]
  ·For cutting concrete, granite, hard bricks, roof tiles, etc.

  Days to Ship:	12 Day(s)

• 

  Cutting Master

  SANKYO DIAMOND INDUSTRIAL

  Excellent sharpness. Short chip turbo segment with excellent sharpness. Diagonal slits: The ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained. Short tip: Radiates heat and reduces substrate runout. Improved safety. Rounded edge: The chip angle is rounded to prevent chip splintering and improve safety.

  Days to Ship:	11 Day(s) or more

• 

  Red Inazuma

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete and concrete secondary products (fume pipes, U grooves). Can cut under conditions most ideal for the engine model. Laser turbo type.

  Days to Ship:	11 Day(s) or more

• 

  Diamond Wheel Laser (Dry Type)

  LOBTEX

  [Features]
  · For cutting concrete, secondary concrete products, block, slate, ALC, stone, etc.
  · Since this product maintains its strength even at high temperatures, it allows for safe work by reducing the amount of chipping that flies off during the extreme heat produced by difficult-to-cut machining.
  · As it bonds instantaneously, it causes little thermal effects on the tip and substrates. It fully utilizes the sharpness of diamond abrasive grains and shows outstanding sharpness

  Days to Ship:	1 Day(s) or more

• 

  Diamond Wheel Cutting King WA/SA (Dry Type)

  LOBTEX

  A diamond cutter with convincing "cost performance" and substantial "variations".
  [Features]
  ·WA (wave type) gives a more beautiful finish.
  ·SA (segment type) gives priority to sharpness and speed.
  [Applications]
  ·Ideal for cutting general concrete products, blocks, slates, mortar, bricks, roof tiles, tiles, etc.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Diamond Blade for Public Works (Wet Type)

  LOBTEX

  [Features]
  ·Diamond civil engineering blades are high-quality blades that are suitable for wet use by attaching to concrete cutters, etc., and can be widely used for cutting asphalt, concrete roads, blocks, bricks, and other building structures.

  Days to Ship:	8 Day(s) or more

• 

  Power wire cutter

  YANASE

  Powerful welding diamond provides long service life. Cuts easily thanks to its strong power.

  Days to Ship:	8 Day(s) or more

• 

  Norton, Mini-Ranger Wild

  SAINTGOBAIN

  Highly durable wheel with less diamond shedding realized by vacuum welding manufacturing process. High-grade diamond abrasive grain that supports various workpieces.
  
  [Features]
  · Highly durable wheel with less diamond grain shedding realized by vacuum welding manufacturing process.
  · High-grade artificial diamond abrasive grain that supports various workpiece materials.
  · Due to the symmetric layer, even if one direction wears the performance can be restored by reversing the installation

  Days to Ship:	10 Day(s) or more

• 

  Norton, Cast Iron Ranger

  SAINTGOBAIN

  Diamond wheel exclusively for casting made by vacuum welding manufacturing process. Quickly cuts spouts and cast iron pipe.
  
  [Features]
  · Highly durable wheel with less diamond grain shedding realized by vacuum welding manufacturing process.
  · Makes cutting of cast iron pipes and cast spouts simple and speedy.
  · Due to the symmetric layer, even if one direction wears the performance can be restored by reversing the installation

  Days to Ship:	10 Day(s) or more

• 

  Norton, Nor-Laser Plus

  SAINTGOBAIN

  Mix of the highest-class synthetic diamond and bond as a segmented cutter for hard stone with exceptional sharpness.
  
  [Features]
  · Mix of the highest-class synthetic diamond and bond as a segmented cutter with laser chip.
  · "NOR-LASER PLUS" for Stone Materials

  Days to Ship:	10 Day(s) or more

• 

  Norton, Nor-Laser Max

  SAINTGOBAIN

  Mix of the highest-class synthetic diamond and bond as a segmented cutter for ultra-hard concrete and rebar-reinforced concrete with exceptional sharpness.
  
  [Features]
  · Mix of the highest-class synthetic diamond and bond as a segmented cutter with laser chip.
  · "NOR-LASER PLUS" supports ultra-hard concrete and reinforced concrete

  Days to Ship:	10 Day(s) or more

• 

  Norton, Nor-Rim Max

  SAINTGOBAIN

  [Features]
  · A rim cutter equipped with a wave-shaped diamond chip.
  · Suitable for heavy-duty work such as cutting granite.
  · With a waveform substrate and protection chip, this product is suitable for tough workpieces such as granite.

  Days to Ship:	10 Day(s) or more

• 

  Norton, Nor-Slicer

  SAINTGOBAIN

  [Features]
  · A rim cutter equipped with a wave-shaped diamond chip.
  · Suitable for heavy-duty work such as cutting granite.
  · NOR-SLICER can cut through splinter-prone tiles with a 1.1 (1.4) mm thick blade.

  Days to Ship:	10 Day(s) or more

• 

  Norton, Diamond Cup Wheel, Windmill Type

  SAINTGOBAIN

  [Features]
  · Diamond cup ideal for concrete and stone chamfering and grinding.
  · Windmill type allows for viewing through the substrate hole to verify the work surface.

  Days to Ship:	10 Day(s) or more

• 

  Norton, Diamond Cup Wheel, Standard Type

  SAINTGOBAIN

  [Features]
  · Diamond cup ideal for concrete and stone chamfering and grinding.
  · Standard Type tunes tip to handle hard concrete and granite too

  Days to Ship:	10 Day(s) or more

• 

  Electro-Deposited Diamond Cutter

  TRUSCO NAKAYAMA

  [Features]
  · Balance machined base material prevents chipping.
  · Has good cutting quality and is capable of high efficiency cutting as abrasive grain protrudes compared to metal-bonded products.
  [Applications]
  · For cutting ceramics, glass, marble, tile, refractory bricks, FRP, and Tile.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Scissors (Dry Type) - Blue Segment Type

  GOEI

  [Features]
  · It cuts into the workpiece vigorously.
  · Cutter that can be used for continuous cutting.
  [Applications]
  · For cutting concrete, blocks, cement tiles, etc.

  Days to Ship:	12 Day(s)

• 

  Diamond Wheel 105PE Segment

  BOSCH

  [Features]
  ·Economy type suitable for light work.
  ·For cutting slate, etc.
  ·Wheel is segment type.
  ·Main cutting material: concrete/asphalt/block/brick

  Days to Ship:	12 Day(s)

• 

  Diamond Portable Cutter Blue (Straight)

  ASAHI DIAMOND

  A standard type with excellent balance of sharpness and tool life

  Days to Ship:	16 Day(s) or more

• 

  Diamond Portable Cutter Blue (Offset)

  ASAHI DIAMOND

  A standard type with excellent balance of sharpness and tool life
  
  [Features]
  · A corner cutter with a protective cover attached to the flange for improved safety

  Days to Ship:	16 Day(s) or more

• 

  Diamond Portable Cutter Light Blue

  ASAHI DIAMOND

  Type with emphasis on sharpness that uses the segment wave
  
  [Features]
  · Popular item with emphasis on sharpness that uses the segment wave

  Days to Ship:	16 Day(s) or more

• 

  Diamond Portable Cutter Light Green (Single)

  ASAHI DIAMOND

  Portable cutter for concrete with diamond abrasive grains embedded in a circular base that allows high-efficiency grinding and excellent sharpness.

  Days to Ship:	16 Day(s) or more

• 

  Diamond Portable Cutter Light Green (Double)

  ASAHI DIAMOND

  [Features]
  · Popular Products Optimal for Cutting Work for Various Concrete Flat Surfaces, Curved Surfaces, and Corner Areas

  Days to Ship:	16 Day(s) or more

• 

  Diamond Wheel

  DREMEL

  [Features]
  · The diamond wheel is ideal for cutting hard materials such as marble, concrete, brick, porcelain, ceramics, hardwoods, etc.

  Days to Ship:	12 Day(s) or more

• 

  Diamond Cutter Set of 3

  EARTH MAN

  [Features]
  ·For cutting and grooving concrete, blocks, bricks, tiles, roof tiles, etc.
  ·3-disc set of segment, wave hard, and wave.
  ·Compatible tools: disc grinder, electric cutter.
  ·Dry type.

  Days to Ship:	9 Day(s) or more

• 

  Small Cutter

  SANKYO DIAMOND INDUSTRIAL

  For cutting tiles.
  
  [Features]
  · Flat blade edge for cutting section focus.
  · Also ideal for wet tile cutting.
  · Rim type for clean finishing of cut sections.

  Days to Ship:	14 Day(s) or more

• 

  Dry Cup (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Best suited for rough surface grinding of concrete and stone.

  Days to Ship:	16 Day(s) or more

• 

  Dry Saver (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks and stones. By embedding in resin, it suppresses encroachment into concrete and stone materials. Ideal for finishing and flat grinding.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Dry Saver (for Stone)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. The embedded resin suppresses any biting into concrete or stone materials. Ideal for finishing and flat grinding.

  Days to Ship:	15 Day(s) or more

• 

  Dry Surfacer

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. For cutting both concrete and stone. 3 times longer life. Cross-shaped tip increases grinding power and also improves durability.

  Days to Ship:	14 Day(s) or more

• 

  Dry Surfacer Ace

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Workability is improved with surfacer sharpness intact.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit is lightweight while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Days to Ship:	16 Day(s) or more

• 

  Dry Surfacer Ace DX

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · It has an improved lifetime.
  · Grinding of granite also has distinctively sharp performance.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Days to Ship:	16 Day(s) or more

• 

  Dry Surfacer Ace Light

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Suitable for minor work. Affordable pricing.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  Days to Ship:	16 Day(s) or more

• 

  Concrete Cutting GH950 358X30.

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete, resin concrete and high-strength concrete. Laser turbo blade that boasts a superb cutting edge. A diamond tip was designed and developed for cutting electrical poles (with steel bars).

  Days to Ship:	11 Day(s) or more

• 

  R Cutter

  SANKYO DIAMOND INDUSTRIAL

  Used for cutting interlocking blocks, concrete, bricks, and blocks. Revolutionary Round-cutting Diamond Cutter

  Days to Ship:	21 Day(s) or more

• 

  Sharp Cut (M Green)

  SANKYO DIAMOND INDUSTRIAL

  [Applications]
  It can be used for cutting tiles.
  [Features]
  The cutter is easy to use for cutting a variety of tiles, and is a rim-type cutter that gives a clean cut.

  Days to Ship:	8 Day(s) or more

• 

  Inazuma LJ 305 mm X30.5

  SANKYO DIAMOND INDUSTRIAL

  Cutting of blocks and secondary concrete products. Razor blade with emphasis on cutting feel used for standard type for both engine cutter and electric cutters.

  Days to Ship:	11 Day(s) or more

• 

  Craftsmanship, RIM

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Rim type standard product that finishes cut cleanly

  Days to Ship:	8 Day(s) or more

• 

  Craftsmanship (Segment)

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Segmented type standard product with emphasis on sharpness

  Days to Ship:	26 Day(s) or more

• 

  Craftsmanship RIM (Flange)

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. Ideal for cutting edges. You can cut even right-angle sections nice and straight without interference from the locknut.

  Days to Ship:	11 Day(s) or more

• 

  Block Craftsman

  SANKYO DIAMOND INDUSTRIAL

  Cutting block, red brick, and concrete. Economy type that is convenient for simple cutting. Good finish with blocks, mortar, red bricks and concrete. Amazing long life.

  Days to Ship:	8 Day(s) or more

• 

  Pro Tile Cutter

  SANKYO DIAMOND INDUSTRIAL

  Roofing tile cutting. Thin blade for quick cutting of hard tiles. Excellent sharpness with 1.3 mm thick blade. A rim type that produces a clean cut.

  Days to Ship:	13 Day(s) or more

• 

  Rakuraku Cut-Kun Cutting Wheel

  SANKYO DIAMOND INDUSTRIAL

  [Applications]
  Can be used for cutting tiles and roof tiles.
  [Features]
  It is a rim type that gives a clean finish to the cut end.

  Days to Ship:	14 Day(s) or more

• 

  Tile Nine

  SANKYO DIAMOND INDUSTRIAL

  Cutting porcelain tiles, pottery tiles and hard tiles. Thin and fast! Achieving a clean cut! Blade thickness of 0.9 mm reduces chipping and improves cutting speed!!

  Days to Ship:	16 Day(s) or more

• 

  Tile Pro DX

  SANKYO DIAMOND INDUSTRIAL

  Cutting porcelain tiles, ceramic tiles, and hardened tiles. Can be selected according to the sharpness. Less chipping and beautifully cut surface. Blade thickness 1.0 mm: Cutting speed is 20% improved compared to conventional products.

  Days to Ship:	11 Day(s) or more

Loading...