Anti-Static Foreign Matter Removal Tools

• 

  Strong Carbon Static Charge Brush (Wood-Type)

  STAC AND OPTIK

  [Features]
  · Excellent heat resistance (180°C) and chemical resistance, and demonstrates high conductivity.
  · Weak acid-resistant, dissolves in strong acid, insoluble in general organic solvents and dissolves in phenols.
  [Applications]
  · Removal of solder balls from scattered solder and foreign matter during the manufacturing of circuit boards.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Compact Static Elimination Brush (Aluminum Handle Type)

  STAC AND OPTIK

  A compact static removal brush with self-discharging ability.
  [Features]
  · 40 denier ultra-thin fiber specification with self-discharging ability.
  · The hair material is 100% "Thunderon," an organic conductive fiber.
  · Static removal and dust removal is possible without scratching.
  · With a main body ground effect since the handle is made of aluminum.
  [Applications]
  · Static removal of various belts and static removal and dust removal of film.

  Days to Ship:	16 Day(s)

• 

  ESD Parts Tray F-21/F-22/F-23

  HOZAN

  ESD parts tray for sorting parts by type or process.
  [Features]
  · Conforms to the management standard for anti-static products RCJS (5-1:2014).
  · Parts tray which is convenient for temporary storage, classification and workplace transport of electronic parts.
  · ESD measures are especially important when handling parts that are not on the circuit board.
  [Applications]
  · A component tray for temporarily placing electronic parts.
  · When not in use, trays can be nested and stacked on top of each other so they can be stored in minimum space.
  · The parts trays are stackable even when combining trays with different number of partitions.

  Days to Ship:	35 Day(s)

• 

  Anti-Static Brush w/ Ground Cord

  STAC AND OPTIK

  A strong carbon static removal brush with ground cord in which both push hooks and alligator clips can be attached to the handle part.
  [Features]
  · Conductive carbon black-blended fiber "Mono Eight" is used for the nylon (wire diameter 0.15 mm).
  · For the removal of residue; improves work efficiency by grounding with the ground cord at sites where work gloves are worn.
  · Excellent heat resistance and chemical resistance, and demonstrates a high static removal performance.
  · The ground cord includes a 1MΩ resistance to protect the human body.
  [Applications]
  · Removal of residue and static before and after board mounting.
  · Also suitable for use in clean rooms.

  Days to Ship:	1 Day(s) or more

• 

  ESD Foam F-7/F-9/F-10

  HOZAN

  Anti-static foreign matter removing urethane foam.
  [Features]
  · Conductive and hard.
  · Foam can be cut easily with a cutter knife or scissors.
  · Simply insert the IC into the form to provide the same potential to all the terminals and prevent electrostatic damage.
  · The lead can be fixed thanks to the elasticity of the urethane.
  [Applications]
  · For protecting electronic components and circuit boards.

  Days to Ship:	16 Day(s) or more

• 

  IC Case

  ENGINEER

  An IC case in which a high density 10 mm thick conductive polyethylene foam is spread out in an anti-static plastic case.
  [Features]
  · Compact IC case, the surface resistance value of the polyethylene foam is 5 × 10^6 Ω or less.
  · The surface resistance value of the polyethylene foam is 5 × 10^6 Ω or less.
  · An anti-static countermeasure product that protects electronic parts, etc. from static electricity disturbance during storage, transportation and carrying.
  [Applications]
  · Optimal for preventing static electricity disturbance in electronic parts such as IC chips.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Electro-Conductive Flexible Partition

  AS ONE

  As the product can be cut to the required size, it is conveniently used for classifying small objects and putting them in order.

  Days to Ship:	Quote

• 

  Conductive Resin Handle Brush Type Ionizer Brush

  STAC AND OPTIK

  An anti-static foreign matter removal tool in which conductive resin (Takiron) is used for the entire handle, a brush type strong carbon static removal brush.
  [Features]
  · Conductive carbon black-blended fiber "Mono Eight" is used for the nylon (wire diameter 0.15 mm).
  · Ground function is present wherever you grip during work.
  · Excellent heat resistance and chemical resistance, and demonstrates a high static removal performance.
  [Applications]
  · Removal of residue and static before and after board mounting.
  · Also suitable for use in clean rooms.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Compact Static Elimination Brush (Wooden Handle Type)

  STAC AND OPTIK

  [Features]
  ·40 denier superfine fibers with self-discharging power eliminate static electricity and remove dust without scratching.
  [Applications]
  ·Eliminates static electricity and removes dust from films, plastic plates, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Ionizing Brush (Wooden Handle)

  STAC AND OPTIK

  [Features]
  · 40 denier ultra-thin fiber with self-discharging ability, capable of static removal and dust removal without scratching.
  [Applications]
  · Static removal and dust removal of microbalance dishes, etc.* Measurement values are stable.

  Days to Ship:	16 Day(s)

• 

  DESCO Label ESD Protection Symbol Mark 2.5 × 2.5 cm 1,000 Sheets【1,000 Pieces Per Package】

  DESCOJAPAN

  [Features]
  · Notifies the surrounding that anti-static countermeasures are provided.
  · Label for ESD protection symbol mark.

  Days to Ship:	12 Day(s)

• 

  Conductive Foreign Matter Removal Tool Conductive Peta Pen

  ATOM KOUSAN

  [Features]
  ·There are 2 types of double-sided shafts, and 3 types of pen rubber (sold separately) can be used according to the application.
  ·The main body and pen rubber part maintain conductivity.
  [Applications]
  ·Removal of spot dust.

  Days to Ship:	16 Day(s) or more

• 

  Conductive Peta-Pen Pen Rubber

  ATOM KOUSAN

  Pen rubber for the conductive foreign matter removal tool, Peta Pen
  [Features]
  · The material is conductive urethane.
  · Three types of tip shapes are available: spatula type, pencil type and shell type.
  · Surface resistance value: 1​0^8Ω.
  [Applications]
  · Conductivity retention.

  Days to Ship:	16 Day(s) or more

• 

  Conductive Foreign Matter Removal Tool Conductive Peta Stick

  ATOM KOUSAN

  [Features]
  · An ultra-fine type foreign matter removal tool for removing microscopic level fine waste with the adhesive urethane on the tip.
  [Applications]
  · Pick-up tool for foreign matter removal.
  · Removing fine foreign matter.

  Days to Ship:	16 Day(s) or more

• 

  Conductive Peta Stick Dedicated Shaft

  ATOM KOUSAN

  [Features]
  · The shaft is given conductivity.
  · Can be used with both Conductive 03 and 05 Peta Sticks, as well as older types of Peta Sticks.

  Days to Ship:	16 Day(s) or more

• 

  Foreign Matter Removal Tool Peta Roller (Electrically Conductive Type)

  ATOM KOUSAN

  An anti-static foreign matter removal tool that does not use adhesives or silica components.
  [Features]
  · Static electricity is discharged through the conductive gloves and earth band of the worker.
  · An anti-static measure product for clean rooms.
  · The waste adhered to the rubber is removed with a special transfer sheet that can be washed and reused.
  · Replacing just the adhesive rubber is possible.
  · Reduced frictional charging and delamination charging.
  [Applications]
  · Cleaning various displays.
  · Dust prevention measures before printing and painting.

  Days to Ship:	16 Day(s) or more

• 

  Conductive Foreign Matter Removal Tool Peta Spatula

  ATOM KOUSAN

  [Features]
  · A spatula shape optimal for removing waste in the gaps and edge parts of flat panel frames.
  · The spatula-shaped soft rubber tip and non-sticky hard grip part are integrally molded.
  · Conductivity is present from the tip to the grip part.
  [Applications]
  · Waste removal of gaps in frames and edge parts of panels.

  Days to Ship:	16 Day(s) or more

• 

  Conductive Foreign Matter Removal Tool Transfer Sheet

  ATOM KOUSAN

  Conductive foreign matter removal tool made of conductive urethane rubber.
  [Features]
  · Waste adhered to a Peta Roller, a Peta Pen or a Peta Spatula is removed by transferring to a transfer sheet.
  · Reusable many times by washing with water.
  [Applications]
  · Removal of waste adhered to a Peta Roller, a Peta Pen or a Peta Spatula.

  Days to Ship:	16 Day(s) or more

• 

  PETA Handkerchief

  ATOM KOUSAN

  [Features]
  · Due to the adhesive power of rubber, it is optimal for the cleaning of workpieces with uneven surfaces, curved surfaces or complex shapes such as circuit boards after mounting electronic parts.
  · Reusable by washing away the adhered waste with water.
  [Applications]
  · For the removal of foreign matter adhered to the surface of workpieces with curved surfaces or complex shapes.

  Days to Ship:	35 Day(s)

• 

  IC Foam

  ENGINEER

  High density, 10 mm thick conductive urethane foam.
  [Features]
  · Conductive polyethylene foam that protects CMOS IC from static electricity disturbance with carbon black.
  · Polyethylene additives (carbon and fatty acid esters).
  · Surface resistance: 5 × 10^6 Ω or less, expansion ratio: 30 times.
  · A polyethylene-made anti-static foreign matter removal tool containing carbon black and fatty acid esters.
  [Applications]
  · Optimal for the protection of electronic parts, etc. from static electricity disturbance during storage, transportation and carrying.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Foldable Container (Conductive)

  AS ONE

  Days to Ship:	18 Day(s) or more

• 

  Electro-Conductive Container

  AS ONE

  [Features]
  ・ Excellent antistatic effect protects electronic components, etc., from electrostatic destruction

  Days to Ship:	Quote

• 

  Small Type Conductive Container

  AS ONE

  AS ONE Static Electricity Countermeasure Foreign Matter Remover Small Conductive Container

  Days to Ship:	Quote

• 

  Conduction Type Container PZ

  AS ONE

  [Features]
  Because it is made of conductive PP, it can be used safely even when a circuit board is stored.
  Each container has a permissible weight of 2.5 kg and can be stacked up to 20 layers.
  [Applications]
  Suitable for managing and storing small equipment.

  Days to Ship:	Quote

• 

  Electro-Conductive Box

  AS ONE

  Days to Ship:	8 Day(s) or more

• 

  Electro-Conductive Work Tray

  AS ONE

  Parts are unlikely to fall out during detailed work. Made of conductive polypropylene that does not accumulate static electricity easily.

  Days to Ship:	Quote

• 

  ESD Circuit Board Holder

  AS ONE

  F-21/22/23 can be nested, and stacking can also be performed by rotating 180°each time, without touching the content. F-36/37 can be used to place small boards as well as component boards. F-37 features greater heat resistance than F-36. F-32/33 can be nested and include a cleaning fluid discharge port. F-14 has flexibility, making it suitable for the bagging of small parts, etc.

  Days to Ship:	Quote

• 

  Static Elimination Gold Brush (With Ground Function), Brush Effective Length 200 / 300 mm

  STAC AND OPTIK

  [Features]
  ·The effective length of the brush is long, making it suitable for static elimination in a wide range of applications. Since the grip part is equipped with a ground, the brush can be discharged through the human body without being charged. It is also possible to connect a ground wire.
  [Applications]
  ·Static elimination of printed circuit boards and plastics.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Conductive Resin Handle Ionizer Brush (Machine Mounted Type)

  STAC AND OPTIK

  [Features]
  · The handle is made of special conductive plastic resin.
  · Can be directly attached to machinery since all parts have conductivity.
  · The main body has a hole for earth wire.
  · Excellent for mounting processes because holes can be opened with a drill.
  [Applications]
  · For removing static electricity.

  Days to Ship:	16 Day(s)

• 

  Solder Ball Neutralization Brush (Oval Type with Handle)

  STAC AND OPTIK

  [Features]
  ·It has the necessary repulsive force and anti-static effect to remove solder balls caused by flying solder during board manufacturing, and to remove foreign matter.
  ·It has excellent heat and chemical resistance and exhibits high conductivity.
  ·The handshake part has a grounding function.
  ·Equipped with a safety function that prevents finger injuries when removing solder balls.
  [Applications]
  ·Solder ball removal, foreign matter removal, and static electricity removal from printed circuit boards.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Strong Carbon Static Charge Brush (Bamboo-Type)

  STAC AND OPTIK

  [Features]
  · Excellent heat resistance (180°C) and chemical resistance, and demonstrates high conductivity.
  · Weak acid-resistant, dissolves in strong acid, insoluble in general organic solvents and dissolves in phenols.
  [Applications]
  · Removal of solder balls from scattered solder and foreign matter during the manufacturing of circuit boards.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Denkitor® Bar Tape

  VILENE CREATE

  [Features]
  · Removes static electricity with a corona discharge.
  · A hole-processing to which fixing is possible with adhesive processing or bolts on the upper portion of the tape.
  [Applications]
  · Placed by passing over the manufacturing line from left to right and hanging like curtains.

  Days to Ship:	12 Day(s)

• 

  Static Electricity Removal Wiping Cloth Electricity Remover L

  AS ONE

  【Product Specifications】
  ・Model number： L
  ・Size (mm)： 500 x 1000
  ・Quantity： 1 bag (1 sheets)
  ・Material： Ultrafine fiber nonwoven fabric

  Days to Ship:	Quote

Loading...