IMAO CORPORATION Leading-in / Bushing Clamps

• 

  Remote Jack (CP300)

  IMAO CORPORATION

  · Can be remotely operated using a separately working extension bar etc.
  · Use extension bar for tapped hole machining. (Dimensions Reference)
  · When operating remotely using an extension bar, replace the knob on the extension bar to use.

  Days to Ship:	Same day or more

• 

  Actima Clamp (ACR, ACL)

  IMAO CORPORATION

  Boss section is moved by lever operation. 2 types available: push-out / pull-in.

  Days to Ship:	10 Day(s) or more

• 

  Bushing Clamp (QLPU)

  IMAO CORPORATION

  Toolless clamp with lever operated boss protrusion. By using part in application configuration, a toolless clamp can be built. This series CAD data is being revised. These revisions will be completed soon.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Jack Bolt (BJ332)

  IMAO CORPORATION

  Jack bolt to which set screws etc., can be attached to the tip.

  Days to Ship:	Same day or more

• 

  Instroke Clamp (QLPD)

  IMAO CORPORATION

  With the rotation of lever, clamp pin and clamp bolt draw in, clamping the workpiece. Both levered and non-lever types available. This series CAD data is being revised. These revisions will be completed soon.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Akuchima Clamp Accessory (AC-1, AC-2, AC-3)

  IMAO CORPORATION

  Actima clamp use accessory Simply insert to install
  
  [Features]
  · The Actima clamp can be installed simply by inserting.

  Days to Ship:	Same day

• 

  Clamp Bolt (QLPD-M)

  IMAO CORPORATION

  Clamp bolt for instroke clamp. Custom orders products are also available to suit the customer's specification.

  Days to Ship:	Same day or more

• 

  Clamp Pin (AMWPD-X)

  IMAO CORPORATION

  [Applications]·Clamp bolt for AMWPD-X * The L dimension can be adjusted by ±1 mm from the specified dimension, so please use it after adjusting it to the appropriate dimension as necessary.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Bolt (AMWPD-M)

  IMAO CORPORATION

  [Usage]
  · AMWPD-W use clamp pin
  [Features]
  · Custom order to suit customer use available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Air Instroke Clamp (AMWPD-W)

  IMAO CORPORATION

  [Features]
  · High clamping force.
  · Through wedge construction same size compared to air cylinder.
  · Approximately 2X clamping force.
  · Even in the event of loss of pressure due to air leakage etc. due to wedge construction.
  · there is no reduction in existing clamp force.
  · Air hole for seating sensor.
  · Seating confirmation use air hole provided, and so using the seating confirmation switch enables confirmation of workpiece seating.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Unit (Flanged Type) (CP150)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Units (Double Type)(CP151)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Units (Single Type) (CP152)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Taper Clamp Bolt (Standard Type) (CP155-L)

  IMAO CORPORATION

  [Usage]
  · Use clamp unit (double type) CP151 for positioning.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Taper Clamp Bolt (Diamond Type) (CP155-D)

  IMAO CORPORATION

  [Usage]
  · For workpiece positioning CP155-L (standard type) use as set.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Bolt (CP156)

  IMAO CORPORATION

  [Applications]·It can be used for attachment of the CP151 clamp unit (double type) to the base plate. ·Please use it by attaching it to the workpiece. ·For places where positioning is not required. ·Pitch tolerance of tapped holes should be processed by ±0.2.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Tapered Bushing (CP157)

  IMAO CORPORATION

  [Usage}
  · Taper bushing for fitting CP150 to base plate.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Double Tapered Clamp Pin (CP158)

  IMAO CORPORATION

  [Applications]·It can be used for connecting CP151 clamp unit (double type). ·Repeated positioning accuracy is 0.2.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Straight Bushing (CP159)

  IMAO CORPORATION

  [Usage]
  · Positioning bushing for fitting CP152 to base plate.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Retracting Clamp (QLPD)

  IMAO CORPORATION

  [Features]·Left-turning and right-turning types are available, eliminating the hassle of bolt tightening. ·With or without a lever is selectable.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Pulling Clamp (Heavy Load Type) (QLPDH)

  IMAO CORPORATION

  [Usage]
  · Clamping with instroke from upper side of workpiece.
  [Features]
  · Lever type toolless clamp.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Clamp Bolt (for Heavy Loads) QLPDH-M

  IMAO CORPORATION

  Clamp bottle for clamp & brake (for heavy duties). Custom orders products are also available to suit the customer's specification.

  Days to Ship:	10 Day(s) or more

• 

  Clamp Bolt (for Hexagonal Types) PTPD-M

  IMAO CORPORATION

  · Clamp bolt for hex head type use.
  · Suitable instroke clamp is PTPD12 (P.348).

  Days to Ship:	10 Day(s) or more

• 

  Instroke Clamp (Hexagonal Type) PTPD

  IMAO CORPORATION

  [Features]
  · Can pull and clamp workpiece from bottom face.
  · As the clamp part is not interfering with the cutting surface, cutting processes can be simplified.
  · As operation part is sideways, compared to difficult to work hex bolt downward fixings, operation is easy.
  · Using the separately sold remote control unit, remote operation such as clamping workpiece center etc. is possible.

  Days to Ship:	10 Day(s) or more

• 

  External Air Clamp AMCH-W

  IMAO CORPORATION

  [Features]
  · With diaphragm type clamp mechanism, 4 jaws securely clamp the workpiece.
  · 0.3 mm clamp stroke available. Suitable for lost wax, diecast, extruded material, drawn material, and previously machined workpieces.
  · Can support variety of irregular shaped workpieces.

  Days to Ship:	10 Day(s) or more

• 

  Jack (BJ334)

  IMAO CORPORATION

  [Features]
  · Use according to application height.
  · Use tip for jack suited to workpiece shape. BJ733 (See. P.577)

  Days to Ship:	10 Day(s) or more

• 

  Standard Jack Standard (BJ334)

  IMAO CORPORATION

  [Features]
  · Main body is aluminum and so lightweight.
  · Use tip for jack BJ733 to suit workpiece shape (See P. 577)

  Days to Ship:	Same day or more

• 

  Screw Jack (BJ330)

  IMAO CORPORATION

  [Features]
  · Suits shape of workpiece BJ733 use tip for screw jack. (See P.579)
  · By removing the fixing bolt on the bottom surface, position can be freely changed.

  Days to Ship:	Same day or more

Loading...