(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem.
Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS.
Untuk informasi lebih lanjut, silakan hubungi Customer Service :
TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008.
Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
IMAO CORPORATION Knob Screws（Mounting Section, Material：Steel）
| Days to Ship |
|
|---|
-
IMAO CORPORATION
Screw size is M6 ~ M12 with a resin knob with abundantly high mechanical strength. Operating temperature -30 degrees to 130 degrees.
Days to Ship: Same day -
IMAO CORPORATION
Resin knob with high mechanical strength and the grip part fit to the hand. Operating temperature -20°C to 110°C.
Days to Ship: Same day or more -
IMAO CORPORATION
There are four indentations on the side faces to resist slipping, so the knob is easy to grip with a soft feeling. The boss hole can be easily covered with the center cap of the accessory after knob attachment.
[Features]
· Four of the sides have a dimple to prevent slipping, and there is an elastomer (TPE) applied on the surface of the knob so it has a soft touch sensation that makes it comfortable to operate.
· You can use the snap method by installing a ball & spring which is sold separately.
· The front of the boss hole can be easily covered with the center cap accessory after installation.
· Pilot holes are already processedDays to Ship: 18 Day(s) or more -
IMAO CORPORATION
These stainless steel screws are optimal for use in food machinery and sanitary equipment. Operating temperature -20°C to 110°C.
[Features]
· SUS The product is perfectly rustproof, ideal for food machinery and sanitary equipment.
· Flat shape and dirt resistant- STOCK
Days to Ship: Same day or more -
Safety Adjustment T-Type Handle (STH-N)
IMAO CORPORATION
Normally, the knob is free. The serrations engage only when the knob is pushed down, and it then becomes possible to operate. Operating temperature -30 degrees to 130 degrees.
[Features]
· It can be operated only when the handle is pushed down, so there is no worry of malfunction due to accidental contact etc.
- Since knurling is applied to the bottom of the main unit, initial tightening work can be done comfortablyDays to Ship: Same day or more -
IMAO CORPORATION
Wing Knob (CWN)
Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Wing type
● Thread Size : M5, M6 and M8
● Material : SUM22L
Knob - Polyamide
Screws - Male Thread (S10C), Female Thread (Brass)
[Application]
Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so onDays to Ship: Same day or more -
IMAO CORPORATION
[Features]
· Standard type cross knob which can be strongly tightened due to it's cross shape.Days to Ship: Same day or more -
Days to Ship: Same day or more -
IMAO CORPORATION
In female threads, brass, anti static, SUS model. The female screw is made of brass and is anti-static. The male screw is made of steel, and is anti-static, SUS and there are some variations made by the manufacturer.
[Features]
· SUS made by inserting it is the perfect rust preventive product using SUS- STOCK
Days to Ship: Same day or more -
IMAO CORPORATION
With its unique structure, it is a nut that can be tightened quickly.
[Features]
· Quick tighteningDays to Ship: Same day or more -
IMAO CORPORATION
It has a star shape grip that you can grasp easily and has a soft feeling.
[Features]
· The grip portion a soft touch knob covered with a thermoplastic elastomer (TPE).
- Provides a soft feeling and doesn't cause fatigueDays to Ship: Same day or more -
IMAO CORPORATION
It is hard to slip due on the dimples on the side, and is a knob that you can easily grip and which provides a soft feeling.
[Features]
· The grip portion a soft touch knob covered with a thermoplastic elastomer (TPE).
- Provides a soft feeling and doesn't cause fatigueDays to Ship: Same day or more -
Ergonomic Seven Lobed Knobs (ELK)
IMAO CORPORATION
[Features]
· The dimples on the side of the knob are designed based on ergonomics and give a comfortable grip feeling, and a lot of tightening can be achieved with little force.
- Although the standard color of the top of the main unit is black, we also accept orders for orange, gray, yellow, light blue, and redDays to Ship: Same day or more -
IMAO CORPORATION
[Features]
· SUS The product is perfectly rustproof, ideal for food machinery and sanitary equipment.
· This is a flat shape which prevents clogging from dirt.
· Chrome plating is resistant to wear and rubbing, it is resistant to sea water/detergent acetone/ethyl alcohol/chlorine solution.
· It is also suitable for facilities requiring frequent cleaning and its good for outdoor use.Days to Ship: Same day or more -
IMAO CORPORATION
Resin made knob with a stylish design. Increase the added value of the device you attach it to. It can be used at temperatures between -30°C and 90°C.
- STOCK
Days to Ship: Same day or more -
IMAO CORPORATION
Strong tightening can be done by using the bar.
[Features]
· Strong tightening can be performed by using the barDays to Ship: Same day or more -
T Type Adjustment Handle (ATH-N)
IMAO CORPORATION
As you pull up on the knob, the serration will come off and it will be freed. You can avoid interference etc. during installation. Operating temperature -30 degrees to 130 degrees.
Days to Ship: Same day or more -
IMAO CORPORATION
[Features]
· The shape of the wing designed based on ergonomics fits the fingers, and it does not hurt the hand, even when using strong force.
·The cap can be easily removed by screwing in the bolt from the back and pushing it out.
·Available with or without a cap.
·The cap is available in 6 colors (orange, gray, yellow, light blue, black, and red).
·The operating temperature is -30 to +130°C.
[Applications]
·Ideal for screw tightening points of various devices.Days to Ship: Same day or more -
Safety, Adjust Star, Knob (SSTK-N)
IMAO CORPORATION
Normally, the knob is free. The serrations engage only when the knob is pushed down, and it then becomes possible to operate. Operating temperature -30 degrees to 130 degrees.
[Features]
· It can be operated only when the knob is pushed down, so there is no worry of malfunction due to accidental contact etc.Days to Ship: 18 Day(s) or more -
IMAO CORPORATION
[Features]
· This TBKM movable type has a spring built in the main body, and it can hold the bar in an arbitrary position.
· End stopper prevents the bar from falling out.
· T-shaped allows for strong tightening.Days to Ship: Same day or more -
Plastic Knurled Knob (GKN/GKF/GKF-N)
IMAO CORPORATION
[Features]
· It prevents slipping with its diamond cut around the knob, and it has a comfortable grip.
· We use a special knurl design insert that increases the adhesion with the resin to the utmost possible degree, and also suppresses the local stress at the joint.
· It has excellent torque transmission, and there is a function to suppress cracks and damage around the boss, even in extreme environments where the resin shrinks rapidly- STOCK
Days to Ship: Same day or more -
Days to Ship: Same day or more -
IMAO CORPORATION
[Features]
· Can be tightened at the set torque.
· The built-in spring and ball produces a 'click' when the set torque is reached, making it possible to physically sense when it is fully tightened.
· Once tightened, the knob can be rotated in the same direction in which it is tightened and set to any given position.Days to Ship: 16 Day(s) or more -
IMAO CORPORATION
Strong tightening achievable with the 3 arms, ensuring plenty of grip. Operating temperature -30 degrees to 130 degrees.
[Features]
· Strong tightening can be achieved with the excellent 3 arm finger stopperDays to Ship: Same day or more -
IMAO CORPORATION
It is a knob with large dimples on the side, which makes it easy to operate and difficult to slip. There are variations of threading, female, female through, and male.
Days to Ship: Same day or more -
IMAO CORPORATION
Various types, such as no scale, with calibration, with arrow, and without flange are available. It can also be used for the operation of a potentiometer (resistor).
[Features]
· The center cap can be removed by pushing it from the back with a pen etc.Days to Ship: Same day -
IMAO CORPORATION
[Features]SUS products are completely rust prevention and suitable for food machine and sanitary equipment.
- STOCK
Days to Ship: Same day or more -
IMAO CORPORATION
[Features]·Offering white one suitable for medical applications. ·Long type knurled knob.
Days to Ship: Same day -
IMAO CORPORATION
There are variations with hole, precision hole, male thread, female thread, stainless steel.
- STOCK
Days to Ship: Same day or more -
IMAO CORPORATION
STK-AE self-extinguishing UL94V-0 certification, operating temperature -30 degrees to 150 degrees.
[Features]
· STK-AE self-extinguishing UL94V-0 certification, operating temperature -30 degrees to 150 degreesDays to Ship: Same day or more -
IMAO CORPORATION
It is a knob with a flat side knurled shape and a slip resistant design.
[Features]
· Ideal for panel securingDays to Ship: Same day or more -
IMAO CORPORATION
Hand Knob (HK)
Knobs Screws are commonly used in various applications to secure, adjust, and control different mechanical devices. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Six Lobed Knobs
● Main Body Outer Diameter (mm.) : 40, 50, 63 and 80
● Material :
Knobs - FC200
[Application]
Hand Knob Screws are commonly used in fastening, assembly, adjustment, clamping and so onDays to Ship: Same day -
IMAO CORPORATION
It is a knob of excellent design. There are variations including female thread, male thread and six different colors.
Days to Ship: Same day or more -
IMAO CORPORATION
Strong tightening achievable with the 3 arms, ensuring plenty of grip. Operating temperature -20°C to 110°C.
Days to Ship: Same day or more -
IMAO CORPORATION
It has dimples on the sides making it slip resistant, and an easy to operate nut. Perfect for jig etc. There are variations including black dye, chrome plating, and stainless steel.
Days to Ship: Same day or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Mounting Section Dia. d (mm) or Nominal Dia. |
| Mounting Section Type |
| Mounting Section, Length L(mm) |
| Main Body, Type |
| Main Body Material |
| Round Shape, Type |
| Mounting Section, Material |
| Threaded End Machining |
| Set Screw Flat Machining |
| Side Machined |
| Polygonal Shape, Type |
| T Shape, Type |
| Additional Function |
| Tapped, Round Hole Machining |
| Main Body, Surface Treatment |
| Mounting Section, Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION |
| Product Series | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | Same day | Same day or more | 18 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 18 Day(s) or more | Same day or more | Same day or more | Same day or more | 16 Day(s) or more | Same day or more | Same day or more | Same day | Same day or more | Same day | Same day or more | Same day or more | Same day or more | Same day | Same day or more | Same day or more | Same day or more |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||
| Mounting Section Dia. d (mm) or Nominal Dia. | M6 ～ M12 | 6 | 10 ～ 12 | M5 ～ M12 | M5 ～ M10 | M6 ～ M8 | 5 ～ M20 | - | M4 ～ M10 | M5 ～ M12 | M6 ～ M12 | M6 ～ M10 | 8 ～ M12 | M4 ～ M12 | M5 ～ M12 | M12 ～ M24 | M5 ～ M10 | M5 ～ M10 | M6 ～ M10 | M10 ～ M20 | M5 ～ M12 | M6 ～ M12 | M5 ～ M6 | M8 ～ M12 | M3 ～ M10 | 6 ～ 8 | M4 ～ M10 | M6 ～ M8 | 8 ～ M16 | M5 ～ M12 | M3 ～ M10 | 5 | M5 ～ M10 | 6 ～ 10 | M5 ～ M12 |
| Mounting Section Type | Threaded | Round Bore | Round Bore | Threaded | Threaded | Threaded | Tapped / Round Bore | Others | Threaded | Tapped | Threaded | Threaded | Threaded / Round Bore | Threaded | Threaded | Tapped | Threaded | Threaded | Threaded / Tapped | Tapped | Threaded (Stepped) | Tapped | Threaded / Tapped | Threaded | Threaded | Round Bore | Threaded | Threaded | Threaded / Tapped / Round Bore / Others | Threaded | Threaded / Tapped | Round Bore | Threaded | Round Bore | Tapped |
| Mounting Section, Length L(mm) | 20 ～ 30 | 25 ～ 30 | 22 ～ 30 | 10 ～ 50 | 10 ～ 30 | 10 ～ 30 | 10 ～ 38 | - | 10 ～ 40 | - | 16 ～ 30 | 10 ～ 50 | 14 ～ 50 | 6 ～ 50 | 10 ～ 50 | 35 ～ 54.5 | 10 ～ 30 | 16 ～ 40 | 10 ～ 50 | 20 ～ 40 | 10 ～ 50 | - | 10 ～ 25 | 25 ～ 40 | 6 ～ 40 | 16 ～ 17 | 6 ～ 40 | 16 ～ 25 | 12 ～ 60 | 10 ～ 55 | 7.5 ～ 40 | - | 10 ～ 40 | 22 ～ 30 | 7 ～ 14 |
| Main Body, Type | T Shape | T Shape | Round Shape | Polygonal Shape | T Shape | T Shape | Polygonal Shape | Polygonal Shape | Round Shape | Round Shape | Polygonal Shape | Round Shape | Round Shape | Polygonal Shape | Polygonal Shape | Special Shape | T Shape | T Shape | Polygonal Shape | T Shape | Round Shape | Round Shape | T Shape | Polygonal Shape | Round Shape | Round Shape | Special Shape | Round Shape | Polygonal Shape | Polygonal Shape | Round Shape | Polygonal Shape | Round Shape | Polygonal Shape | Round Shape |
| Main Body Material | Polyamide | Phenol | Polyamide | Phenol | Polyamide | Polyamide | Steel | Phenol / Polyamide | Polyamide | Steel | Polypropylene | Polypropylene | Polyamide | Polyamide | Polyamide | Steel | Polyamide | Polyamide | Polyamide | Steel | Polypropylene | Steel | Polyamide | Polyamide | Phenol | Polyamide | Polyamide | Phenol | Polyamide | Polypropylene | Steel | Steel | Polyamide | Phenol | Steel |
| Round Shape, Type | - | - | Cylindrical Shape | - | - | - | - | - | Cylindrical Shape | Cylindrical Shape | - | Cylindrical Shape | Cylindrical Shape | - | - | - | - | - | - | - | Cylindrical Shape | Cylindrical Shape | - | - | Cylindrical Shape | Cylindrical Shape | - | Cylindrical Shape | - | - | Cylindrical Shape | - | Mushroom Shape | - | Clamp Shape |
| Mounting Section, Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Threaded End Machining | None | - | - | None | None | None | - | - | None | - | None | None | None | None | None | - | None | None | None | - | - | - | None | None | None | - | None | None | None | None | None | - | None | - | - |
| Set Screw Flat Machining | - | - | None | - | - | - | None | - | - | - | - | - | None | - | - | - | - | - | - | - | - | - | None | - | - | None | - | - | None | - | - | None | - | None | - |
| Side Machined | - | - | Dimple | - | - | - | - | - | Dimple | Knurling | - | Knurling | Dimple | - | - | - | - | - | - | - | Diamond Cut | Knurling | - | - | Knurling | Knurling | - | Knurling | - | - | Knurling | - | - | - | Knurling |
| Polygonal Shape, Type | - | - | - | Pentagon Shape | - | - | Cross Shape | Hexagonal Shape | - | - | Pentagon Shape | - | - | Pentagon Shape | Triangular Shape | - | - | - | Pentagon Shape | - | - | - | - | Triangular Shape | - | - | - | - | Hexagonal Shape | Pentagon Shape | - | Hexagonal Shape | - | Triangular Shape | - |
| T Shape, Type | Bar | Bar | - | - | Bar | Wing | - | - | - | - | - | - | - | - | - | - | Bar | Wing | - | Bar | - | - | Wing | - | - | - | - | - | - | - | - | - | - | - | - |
| Additional Function | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Tapped, Round Hole Machining | - | Blind Bore / Reamer Finishing | Blind Bore / Reamer Finishing | - | - | - | Blind Bore / Reamer Finishing | - | - | Through | - | - | Blind Bore / Through / Reamer Finishing | - | - | Through | - | - | Blind Bore | Blind Bore | Blind Bore | Through | Blind Bore | - | - | Blind Bore / Reamer Finishing | - | - | Blind Bore / Reamer Finishing | - | Through | Blind Bore | - | Blind Bore / Reamer Finishing | Through |
| Main Body, Surface Treatment | None | None | None | None | None | None | Coating | None | None | Black Oxide | None / Others | None | None | None | None | Coating | None | Others | None | Black Oxide | Others | Black Oxide | - | None | None | None | None | None | None | None | Chrome Plating | Chrome Plating | None | None | Black Oxide / Chrome Plating |
| Mounting Section, Surface Treatment | Zinc Plating | Black Oxide | None | Zinc Plating | Zinc Plating | Zinc Plating | None | Black Oxide | Zinc Plating | Black Oxide | Zinc Plating | Zinc Plating | Black Oxide / Zinc Plating | Zinc Plating | Zinc Plating | None | Zinc Plating | Zinc Plating | Black Oxide | Black Oxide | Zinc Plating | Black Oxide | Nickel Plating | Zinc Plating | Zinc Plating | Black Oxide | Zinc Plating | Zinc Plating | None / Black Oxide | Zinc Plating | Chrome Plating | Chrome Plating | Zinc Plating | Black Oxide | Black Oxide / Chrome Plating |
Loading...
Configure
Specification/Dimensions
-
Mounting Section Dia. d (mm) or Nominal Dia.
-
Mounting Section Type
- Threaded
- Threaded (Stepped)
- Tapped
- Tapped (Stepped)
- Round Bore
- Press Fit
- Others
-
Mounting Section, Length L(mm)
-
Main Body, Type
-
Main Body Material
- Stainless Steel
- Steel
- Aluminum
- Nylon
- Phenol
- ABS
- Polyacetal
- Brass
- Polyamide
- Polypropylene
- Melamine Plastic
- EPDM
- Others
- Vinyl
- Cast Iron
- Plastic_
-
Round Shape, Type
-
Mounting Section, Material
-
Threaded End Machining
- None
- Spherical
- With Pad
- Cone Point
-
Set Screw Flat Machining
-
Side Machined
-
Polygonal Shape, Type
-
T Shape, Type
-
Additional Function
-
Tapped, Round Hole Machining
-
Main Body, Surface Treatment
-
Mounting Section, Surface Treatment
Narrow search by specifying Manufacturer
-
- MISUMI (26)
- IMAO CORPORATION (35)
- KONISHI (30)
- NABEYA BI-TECH (28)
- DAIMARU BYORA SEISAKUSHO (15)
- MITSUBOSHI CI (12)
- TRUSCO NAKAYAMA (7)
- RICHENGINEERING (4)
- ESCO (3)
- SUGATSUNE (0)
- TAKIGEN (0)
- SUNCO (0)
- KONOE (0)
- GOSHO WORKS (0)
- KYOWA (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy