KONDOTEC Scaffold Planks

• 

  ø48.6/ø42.7 Combined Pipe Clamp (Orthogonal)

  KONDOTEC

  [Features]
  A clamp that can be also used for orthogonal type and is a component for temporary scaffolding.
  Can be used for single tubes of both ø48.6 mm and ø42.7 mm.
  This product has been certified by the Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  Suitable for clamping pipes.

  Days to Ship:	11 Day(s) or more

• 

  Bullman Metal Fitting C Type

  KONDOTEC

  [Features]
  A C-type bullman metal fitting that is widely used as components for temporary scaffolding.
  Certified by the Scaffolding and Construction Equipment Association of Japan(C-50, C-60).
  [Applications]
  Suitable for joining 2 layers of steel.

  Days to Ship:	12 Day(s) or more

• 

  Safety Band

  KONDOTEC

  [Features]
  A safety band that is a component for temporary scaffolding.
  [Applications]
  In addition to preventing scaffolding plank from moving, it can also be used to temporarily secure cargo and to secure truck sheets.

  Days to Ship:	12 Day(s) or more

• 

  End Stopper C Type (For 600 To 1,219-mm Frames)

  KONDOTEC

  [Features]
  · Safety-focused design
  · No rotation of the outer pipe and the inner pipe.
  · The clamp is always in the same direction, providing excellent workability.
  · Uses round pipe, making it easy to grip and to prevent dropping accidents, thereby improving on-site safety.
  · The outer pipe includes a fall prevention mechanism to prevent the inner pipe from coming out.
  · Emphasis on workability
  · Just one of these can be used to attach frames between 600 and 1,219.
  · With just one of these, inventory control becomes a breeze.
  · The thumbscrew at the end of the outer pipe helps prevent unintended sliding.
  · Hot-dip galvanized for rust-resistance and a longer service life. (Excluding the thumbscrew and rivets).

  Days to Ship:	12 Day(s) or more

• 

  KT Step

  KONDOTEC

  [Features]
  · Adjustable step equipped with 4-step (40 degrees, 48 degrees, 55 degrees and 66 degrees) angle adjustment functionality. Easy to assemble. Boasts excellent safety, workability, storability and cost-performance.
  · The angle is freely adjustable without removing the bolts and nuts; the latching hole that is integrated on the dual-use clamp connected to the single pipe can be slid just by loosening the bolts and nuts, making angle adjustment (40 degrees, 48 degrees, 55 degrees, 66 degrees) easy.
  · "Stacked ribs" makes storage and transportation easy; The "stacked ribs" have been machined with undulations on the end of the stepping board and function to prevent load collapses when step stacking, enabling neat stacking for storage.
  · Space saving and highly economical.

  Days to Ship:	12 Day(s) or more

• 

  KT Bracket (Bolt Type)

  KONDOTEC

  [Features]
  A bracket that is a component for temporary scaffolding.
  This product has been certified by the Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  Suitable as a support for work floors.

  Days to Ship:	14 Day(s) or more

• 

  KT Corner Joint (For 48.6)

  KONDOTEC

  [Features]
  · Compared to single pipe clamps
  · Since the single pipes do not intersect, it is possible to hold pipes that are joined together at the same height.
  · The ends of the single pipes do not have overhang, helping save on space.
  Also mitigates risk of injury.
  · Ideal for the corner parts of temporary enclosures, and the like at construction sites and material storage sites.
  · Movable range: 65° to 290°.

  Days to Ship:	14 Day(s) or more

• 

  Mini Jack

  KONDOTEC

  [Features]
  A mini jack base that is a component for temporary scaffolding.
  Because it is a mini type, it is lightweight and can be finely adjusted.
  [Applications]
  Suitable for changing the height of a base.

  Days to Ship:	13 Day(s) or more

• 

  Same Diameter Clamp

  KONDOTEC

  KONDOTEC same diameter clamp.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	11 Day(s) or more

• 

  Triple Clamp

  KONDOTEC

  KONDOTEC triple clamp.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	12 Day(s) or more

• 

  Single Clamp

  KONDOTEC

  [Features]
  A single clamp that is a component for temporary scaffolding.
  [Applications]
  Suitable for clamping pipes.

  Days to Ship:	12 Day(s) or more

• 

  Rafter Stop Clamp (Fixed)

  KONDOTEC

  [Features]
  A clamps that is a component for temporary scaffolding used for fixing pipes and wooden members.
  [Applications]
  Suitable for clamping pipes.

  Days to Ship:	12 Day(s) or more

• 

  Rafter Stop Clamp (Swivel)

  KONDOTEC

  KONDOTEC rafter stop clamp (swivel).
  A member for temporary scaffolding.

  Days to Ship:	12 Day(s) or more

• 

  Clamp For Net

  KONDOTEC

  KONDOTEC curing clamp.
  A member for temporary scaffolding.
  Quantity: 1 pc.

  Days to Ship:	12 Day(s) or more

• 

  Bon Joint (C Type Joint)

  KONDOTEC

  KONDOTEC scaffolding bone joint (C type joint).
  For single tube connection.

  Days to Ship:	12 Day(s) or more

• 

  "KONDO" Joint Pin

  KONDOTEC

  [Features]
  · New model C type joint for pin-processed pipe connections
  · Tenon slits: Pin-processed pipes can be used with better safety since L-shaped tenons have been cut into the top and bottom portions of the main body.
  · Good balance: The top and bottom sections of the main body are integrated as one, giving smooth movement (of the top and bottom sections) and good balance.
  · Integration of the main body central collar portion: The collar in the center of the main body will not fall off as it is integrated with the top and bottom sections of the main body.

  Days to Ship:	11 Day(s) or more

• 

  Jack Base

  KONDOTEC

  KONDOTEC jack base 09101.
  A member for temporary scaffolding.

  Days to Ship:	14 Day(s) or more

• 

  SWIVEL Jack Base

  KONDOTEC

  [Features]
  A swivel jack base that is a component for temporary scaffolding.
  [Applications]
  Suitable for sloping locations, etc.

  Days to Ship:	14 Day(s) or more

• 

  Adjustable Meshed Step, Fully Rotatable Type

  KONDOTEC

  [Features]
  · Whether used horizontally or vertically, it can be adjusted in increments of 10 degrees depending on the needs of the application. (Fully rotatable type) Can be attached/detached for assembly and repairs, even when placed in the middle of a staircase.

  Days to Ship:	14 Day(s) or more

• 

  Adjustable Mesh Step, 4-Step Type

  KONDOTEC

  [Features]
  · The angle is adjustable in 4-steps: 45 degrees, 55 degrees, 65 degrees and 75 degrees. (4-step type) Can be attached/detached for assembly and repairs, even when placed in the middle of a staircase.

  Days to Ship:	14 Day(s) or more

• 

  Square Clamp

  KONDOTEC

  KONDOTEC square clamp.
  A member for temporary scaffolding.
  There are 4 types.

  Days to Ship:	14 Day(s) or more

• 

  Square/Round Clamp

  KONDOTEC

  KONDOTEC corner/round clamps.
  A member for temporary scaffolding.
  There are 4 types.

  Days to Ship:	14 Day(s) or more

• 

  Other Clamp

  KONDOTEC

  KONDOTEC pipe clamp.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	14 Day(s) or more

• 

  Strong Type V Lock Pin

  KONDOTEC

  [Features]
  A joint that is a component for temporary scaffolding.
  [Applications]
  Suitable for connecting single pipes.

  Days to Ship:	14 Day(s) or more

• 

  Mighty Catch Multi-Type

  KONDOTEC

  [Features]
  · Can be used orthogonally, free (swivel), vertically and horizontally.
  · Bolt tightened so no rattling.
  · Frees you from selecting the required type of clamp.
  · Simplifies inventory management.
  · The wide size reduces lateral rattling.
  · Clamping width up to 30 mm. (Minimum 6 mm) The large plates ensure a firm catch.

  Days to Ship:	14 Day(s) or more

• 

  6-Way Chuck II Type

  KONDOTEC

  [Features]
  · An easy-handling type with 6 functions.
  · 6 functions
  · Vertically fixed (at a right angle to the flange)
  · Vertically fixed (in parallel to the flange)
  · Vertical swivel
  · Horizontally fixed (at a right angle to the flange)
  · Horizontally fixed (in parallel with the flange)
  · Horizontal swivel - a total of six functions; frees you from having to select the required type of clamp.
  · Simplifies inventory management.

  Days to Ship:	12 Day(s) or more

• 

  H Clamp, Fixed/Swivel

  KONDOTEC

  KONDOTEC H clamp, swivel.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	14 Day(s) or more

• 

  Hold Clamp, Fixed/Swivel

  KONDOTEC

  [Features]
  A steel frame clamp that is a component for temporary scaffolding.
  This product has been certified by the Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  Suitable for fixing steel frames.

  Days to Ship:	12 Day(s) or more

• 

  Net Clamp

  KONDOTEC

  [Features]
  · Forged-integral shaft: no welding or caulking in its manufacture so it is compact and lightweight.

  Days to Ship:	14 Day(s) or more

• 

  Base Head

  KONDOTEC

  [Features]
  ·KONDOTEC base head.
  ・ A member for temporary scaffolding.
  ·Standard size code: 39

  Days to Ship:	14 Day(s) or more

• 

  Kanzashi Pin

  KONDOTEC

  KONDOTEC snap pin.
  Snap pin set.
  Quantity: 1 pc.

  Days to Ship:	14 Day(s) or more

• 

  Gravity Lock

  KONDOTEC

  KONDOTEC gravity lock.
  A member for temporary scaffolding.
  Quantity: 1 pc.

  Days to Ship:	14 Day(s) or more

• 

  Jack Base Head

  KONDOTEC

  KONDOTEC jack base head.
  A member for temporary scaffolding.
  Size (mm): Threaded rod: ø34, height: 400

  Days to Ship:	14 Day(s) or more

• 

  Adjustable Step Plate, Fully Rotatable Type

  KONDOTEC

  [Features]
  · Whether used horizontally or vertically, it can be adjusted in increments of 10 degrees depending on the needs of the application. (Fully rotatable type) Can be attached/detached for assembly and repairs, even when placed in the middle of a staircase.

  Days to Ship:	14 Day(s) or more

• 

  Adjustable Step Plate, 4-Step Type

  KONDOTEC

  [Features]
  · The angle is adjustable in 4-steps: 45 degrees, 55 degrees, 65 degrees and 75 degrees. (4-step type) Can be attached/detached for assembly and repairs, even when placed in the middle of a staircase.
  

  Days to Ship:	14 Day(s) or more

• 

  Base Plate

  KONDOTEC

  [Features]
  Component for temporary scaffolding.
  Certified by the Scaffolding and Construction Equipment Association of Japan(ø48.6 only).
  [Applications]
  Suitable for fixing single tubes and pipes.

  Days to Ship:	12 Day(s) or more

• 

  Sheet Clamp

  KONDOTEC

  KONDOTEC sheet clamp.
  A member for temporary scaffolding.
  Quantity: 1 pc.

  Days to Ship:	14 Day(s) or more

Loading...