(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

KYOCERA Turning Inserts(Rake angle:Pozidriv)

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
Brand
Product Series
Days to Ship
Shape
work material
Application
Available corners
Breaker Use
Rake angle
Nose R
Selfishly
Groove Width (For Grooving / Plunging)
Pitch (for Threading)
O.D./ I.D. (For Threading)
Screw Types (for threading)
Number of threads (for threading)

    Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"

      Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"

        Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"

          Inner Diameter Thread Cutting Tip

            Outer Diameter Thread Cutting Tip 16ER/L○○ISO-TF

              Outer Diameter Thread Cutting Tip 16ER/L○○ISO

                Round, Positive, with Hole RCGX/RCMX

                  60° Triangle Positive with Hole TPMT○○GP "Finishing"

                    Diamond Shape 35° / Positive With Hole VBGT

                      60° Triangle Positive, CBN Diamond TPGB

                        Tip for Lathe, CBN Diamond, Positive TPGB

                          Inner Diameter Thread Cutting Tip 11IR/L○○ISO-TF

                            Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"

                              Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"

                                Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing to Intermediate Cutting"

                                  Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"

                                    Turning Insert Diamond 55°, Positive, with Hole, DCMT, "for Finishing to Intermediate Cutting" Stainless Steel, Heat Resistant Alloy

                                      Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing"

                                        Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing"

                                          60° Triangle Positive with Hole TCMT ○○HQ "Finishing"

                                            60° Triangle Positive with Hole TPGT "Fine Cutting"

                                              60° Triangle Positive with Hole TPMT "Medium Finishing"

                                                60° Triangle Positive with Hole TPGH "Finishing"

                                                  60° Triangle Positive with Hole TPGH○○-H "Medium Cutting"

                                                    60° Triangle Positive without Hole TPMR "Finishing"

                                                      80° Hexagon Type Positive with Hole WBGT "Minute Incision"

                                                        Tip for Lathe, CBN Diamond, Positive CPMH

                                                          Tip for Lathe, CBN Diamond, Positive DCMT

                                                            Outer Diameter Thread Cutting Tip 16ER/L○○NPT

                                                              Diamond Shape 70° / Positive With Hole JCET/JCGT

                                                                60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW

                                                                  Pozidriv

                                                                    Diamond Shape 55° / Positive CBN

                                                                      Hexagonal Type, 80°, Positive CBN

                                                                        60° Triangle Positive (No Hole) CBN

                                                                          For Deep Grooving (1 Corner Type) CBN

                                                                            Lathe Turning (1-Corner Specification) Diamond

                                                                              System Bar Diamond for Small Bores

                                                                                Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision"

                                                                                  Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"

                                                                                    Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing"

                                                                                      Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting"

                                                                                        Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"

                                                                                          Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Finishing to Intermediate Cutting" Stainless Steel, Heat Resistant Alloy

                                                                                            Brand

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            Product Series

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"

                                                                                            Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"

                                                                                            Inner Diameter Thread Cutting Tip

                                                                                            Outer Diameter Thread Cutting Tip 16ER/L○○ISO-TF

                                                                                            Outer Diameter Thread Cutting Tip 16ER/L○○ISO

                                                                                            Round, Positive, with Hole RCGX/RCMX

                                                                                            60° Triangle Positive with Hole TPMT○○GP "Finishing"

                                                                                            Diamond Shape 35° / Positive With Hole VBGT

                                                                                            60° Triangle Positive, CBN Diamond TPGB

                                                                                            Tip for Lathe, CBN Diamond, Positive TPGB

                                                                                            Inner Diameter Thread Cutting Tip 11IR/L○○ISO-TF

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 55°, Positive, with Hole, DCMT, "for Finishing to Intermediate Cutting" Stainless Steel, Heat Resistant Alloy

                                                                                            Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing"

                                                                                            Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing"

                                                                                            60° Triangle Positive with Hole TCMT ○○HQ "Finishing"

                                                                                            60° Triangle Positive with Hole TPGT "Fine Cutting"

                                                                                            60° Triangle Positive with Hole TPMT "Medium Finishing"

                                                                                            60° Triangle Positive with Hole TPGH "Finishing"

                                                                                            60° Triangle Positive with Hole TPGH○○-H "Medium Cutting"

                                                                                            60° Triangle Positive without Hole TPMR "Finishing"

                                                                                            80° Hexagon Type Positive with Hole WBGT "Minute Incision"

                                                                                            Tip for Lathe, CBN Diamond, Positive CPMH

                                                                                            Tip for Lathe, CBN Diamond, Positive DCMT

                                                                                            Outer Diameter Thread Cutting Tip 16ER/L○○NPT

                                                                                            Diamond Shape 70° / Positive With Hole JCET/JCGT

                                                                                            60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW

                                                                                            Pozidriv

                                                                                            Diamond Shape 55° / Positive CBN

                                                                                            Hexagonal Type, 80°, Positive CBN

                                                                                            60° Triangle Positive (No Hole) CBN

                                                                                            For Deep Grooving (1 Corner Type) CBN

                                                                                            Lathe Turning (1-Corner Specification) Diamond

                                                                                            System Bar Diamond for Small Bores

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                                                                            Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Finishing to Intermediate Cutting" Stainless Steel, Heat Resistant Alloy

                                                                                            Days to Ship 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            ShapeC (80° Diamond-Shape)C (80° Diamond-Shape)S (Rectangular)T (Triangle)T (Triangle)T (Triangle)R (Circular)T (Triangle)V (35° Diamond-Shaped)T (Triangle)T (Triangle)T (Triangle)C (80° Diamond-Shape)C (80° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)T (Triangle)T (Triangle)T (Triangle)T (Triangle)T (Triangle)T (Triangle)W (Hexagonal Type)C (80° Diamond-Shape)D (55° Diamond-Shape)T (Triangle)OtherT (Triangle)S (Rectangular) / T (Triangle)D (55° Diamond-Shape)W (Hexagonal Type)T (Triangle)OtherOtherOtherC (80° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)
                                                                                            work materialSteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast Iron / Non-ferrous metalSteel / Stainless SteelSteel / Stainless Steel / Cast Iron / Non-ferrous metalSteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyCast Iron / High Hardness MaterialNon-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless SteelSteel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless SteelSteel / Stainless Steel / Cast IronStainless Steel / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast IronSteel / Stainless Steel / Cast IronSteel / Stainless SteelSteel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast IronStainless SteelNon-ferrous metal / Heat-resistant alloy, titanium alloyNon-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast Iron / Non-ferrous metalSteel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyCast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyCast Iron / High Hardness MaterialCast Iron / High Hardness MaterialHigh Hardness MaterialHigh Hardness MaterialHigh Hardness MaterialNon-ferrous metal / Heat-resistant alloy, titanium alloyNon-ferrous metal / Heat-resistant alloy, titanium alloySteel / Stainless SteelSteel / Stainless SteelStainless SteelSteel / Stainless SteelSteel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloySteel / Stainless Steel / Cast IronStainless Steel / Heat-resistant alloy, titanium alloy
                                                                                            ApplicationOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterThreadingThreadingThreadingOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterThreadingOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterThreadingOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterGrooving / PartingGrooving / PartingOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner DiameterOuter Diameter/Inner Diameter
                                                                                            Available corners2243339 or more321 / 3132222222333333311323-1 / 211 / 31112222222
                                                                                            Breaker UseFinishMedium grindingMedium grinding---Medium grindingFinishFinish / Medium grinding---Medium grindingMedium grindingMedium grindingMedium grindingMedium grindingFinishFinishMedium grindingFinishMedium grindingFinishMedium grindingFinishFinish---FinishMedium grinding-------FinishFinishMedium grindingMedium grindingMedium grindingMedium grindingMedium grinding
                                                                                            Rake anglePozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidriv
                                                                                            Nose R0.2 ~ Other0.2 ~ 1.20.4 ~ 0.80.2 ~ OtherOtherOther-0.2 ~ 0.80.2 ~ Other0.2 ~ 0.80.2 ~ OtherOther0.80.4 ~ 0.8Other0.2 ~ Other0.2 ~ 0.80.2 ~ Other0.2 ~ Other0.2 ~ 1.20.2 ~ Other0.2 ~ 0.80.2 ~ Other0.2 ~ 0.80.4 ~ 0.8Other0.2 ~ Other0.2 ~ OtherOther0.2 ~ Other0.2 ~ Other0.4 ~ 1.20.2 ~ 1.20.2 ~ 0.40.2 ~ 0.80.2 ~ 0.40.20.2OtherOtherOtherOther0.2 ~ 0.80.2 ~ Other0.4 ~ 0.8
                                                                                            SelfishlyRight-hand / Left-handNo-handNo-handRight-handRight-handRight-hand / Left-handNo-handNo-handRight-hand / Left-handNo-handNo-handRight-handNo-handRight-hand / Left-hand / No-handNo-handNo-handNo-handRight-hand / Left-handRight-hand / Left-handNo-handNo-handNo-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handNo-handNo-handRight-handRight-hand / Left-handNo-handNo-handNo-handLeft-handNo-handNo-handNo-handRight-handNo-handNo-handNo-handNo-handNo-handNo-handNo-hand
                                                                                            Groove Width (For Grooving / Plunging)------------------------------------3 ~ 6--------
                                                                                            Pitch (for Threading)---0.5–1.5 ~ 41 ~ 30.5 ~ 2.5-----1 ~ 2---------------------------------
                                                                                            O.D./ I.D. (For Threading)---Internal DiameterOuter DiameterOuter Diameter-----Internal Diameter----------------Outer Diameter----------------
                                                                                            Screw Types (for threading)---unified 60° / General Purpose 60° / Whitworth 55° / General Purpose 55° / Taper for Pipes 55° / For American Tube 60° / Trapezoid 30°ISO Meter 60°ISO Meter 60°-----ISO Meter 60°----------------For American Tube 60°----------------
                                                                                            Number of threads (for threading)---8 ~ 28------------------------11.5 ~ 18----------------

                                                                                            Loading...

                                                                                            Related Categories to Turning Inserts