(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

MISUMI Square End Mills (Carbide)(Torsion Angle (θ):Powerful Torsion (45°-60°))

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

    Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

      TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model

        Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model

          Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model

            DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

              DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                  DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

                    DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                      Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

                        Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type

                          Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type

                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                              Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

                                Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

                                  Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                                    Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

                                      Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

                                        Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

                                          Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type

                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

                                            Brand

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            MISUMI

                                            Product Series

                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

                                            TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model

                                            Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model

                                            Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model

                                            DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

                                            DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                                            DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                                            DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

                                            DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

                                            Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type

                                            Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type

                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

                                            Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

                                            Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

                                            Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type

                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

                                            Days to Ship 10 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 16 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 16 Day(s) or more 10 Day(s) or more 10 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more
                                            Specifications
                                            • Non-Coated
                                            • Aluminum
                                            • 3 Flutes
                                            • R (Regular)
                                            • TS
                                            • Titanium
                                            • 4 Flutes
                                            • S (Short)
                                            • DIA
                                            • Aluminum
                                            • 2 Flutes
                                            • R (Regular)
                                            • DIA
                                            • Aluminum
                                            • 3 Flutes
                                            • R (Regular)
                                            • DLC
                                            • Aluminum
                                            • 2 Flutes
                                            • S (Short)
                                            • DLC
                                            • Aluminum
                                            • 2 Flutes
                                            • R (Regular)
                                            • DLC
                                            • Aluminum
                                            • 2 Flutes
                                            • L (Long)
                                            • DLC
                                            • Aluminum
                                            • 3 Flutes
                                            • R (Regular)
                                            • DLC
                                            • Aluminum
                                            • 4 Flutes
                                            • R (Regular)
                                            • Non-Coated
                                            • Aluminum
                                            • 3 Flutes
                                            • B (Stub)
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • S (Short)
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • R (Regular)
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • L (Long)
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • EXL (Extra Long)
                                            • Non-Coated
                                            • Aluminum
                                            • 3 Flutes
                                            • S (Short)
                                            • Non-Coated
                                            • Aluminum
                                            • 4 Flutes
                                            • R (Regular)
                                            • Non-Coated
                                            • Aluminum
                                            • 3 Flutes
                                            • B (Stub)
                                            • Non-Coated
                                            • Aluminum
                                            • 3 Flutes
                                            • B (Stub)
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes
                                            Blade diameter (D)(φ)0.5 ~ 206 ~ 201 ~ 121 ~ 121 ~ 200.5 ~ 203 ~ 120.5 ~ 200.5 ~ 121 ~ 120.5 ~ 200.5 ~ 203 ~ 123 ~ 121 ~ 120.5 ~ 125 ~ 226.2 ~ 16.20.5 ~ 200.5 ~ 203 ~ 12
                                            Blade length (ℓ)(mm)1.5 ~ 6014 ~ 423 ~ 363 ~ 362 ~ 401.5 ~ 605 ~ 481.5 ~ 601.5 ~ 281.5 ~ 181 ~ 401.5 ~ 605 ~ 4815 ~ 602 ~ 241.5 ~ 289 ~ 339 ~ 241 ~ 401.5 ~ 6015 ~ 60
                                            Underneck length (ℓ1)(mm)23 ~ 92---17 ~ 7323 ~ 9229 ~ 7023 ~ 9222 ~ 503 ~ 3617 ~ 7323 ~ 9229 ~ 70-17 ~ 5022 ~ 50-----
                                            Shank diameter (d)(mm)4 ~ 206 ~ 204 ~ 124 ~ 124 ~ 204 ~ 206 ~ 124 ~ 204 ~ 124 ~ 124 ~ 204 ~ 206 ~ 126 ~ 124 ~ 124 ~ 124 ~ 206 ~ 164 ~ 204 ~ 206 ~ 12
                                            Number of flutes(sheet)342322234322223433222
                                            Overall Length (L)(mm)40 ~ 13060 ~ 12040 ~ 8040 ~ 8040 ~ 11040 ~ 13060 ~ 10040 ~ 13040 ~ 8040 ~ 8040 ~ 11040 ~ 13060 ~ 10060 ~ 13040 ~ 8040 ~ 8080 ~ 20080 ~ 18040 ~ 11040 ~ 13060 ~ 130
                                            work materialAluminum[◎] / Copper[○] / Graphite[○] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]
                                            Torsion Angle (θ)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)
                                            Machining ApplicationPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking
                                            CoatingNon-CoatedFor High Hardness (Silicon Group)Dia CoatDia CoatDLCDLCDLCDLCDLCNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated
                                            Blade tip shapeWith LeadC planeSharp EdgeWith LeadSharp EdgeSharp EdgeSharp EdgeWith LeadSharp EdgeWith LeadSharp EdgeSharp EdgeSharp EdgeSharp EdgeWith LeadSharp EdgeMicro RMicro R---
                                            TypeSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquare

                                            Loading...

                                            1. 1

                                            Related Categories to Square End Mills (Carbide)