(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

MISUMI Carbide Drills

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

    Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

      TiAlN Coated Carbide Long Drill, Straight Shank

        TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model

          Carbide Burnishing Drill, Straight Model

            TiAlN Coated Carbide Drill, Straight Shank / Stub Model

              DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model

                Carbide Burnishing Drill, Stepped Model

                  Carbide Drill for Resin Machining, Straight Shank / Stub Model

                    TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

                      TiAlN Coated Carbide Double Margin Drill, Regular

                        TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

                          TiAlN Coated Carbide Drill, Regular

                            Carbide Drill, Straight Shank / Regular

                              TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

                                TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

                                  TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

                                    TS Coated Carbide Composite Spiral Drill, Stub Model

                                      TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

                                        TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

                                          TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

                                            TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

                                              TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

                                                TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

                                                  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

                                                    TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

                                                      TiAlN Coated Carbide Drill, Stub

                                                        TiAlN Coated Carbide Drill, Regular Model with Oil Holes

                                                          TiAlN Coated Carbide Drill, Straight Shank / Regular

                                                            Carbide Drill, Straight Shank / Stub

                                                              TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

                                                                TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

                                                                  TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

                                                                    TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

                                                                      DLC Coated Carbide Drill for Aluminum Machining, Regular

                                                                        DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub

                                                                          Carbide Drill for Aluminum Machining

                                                                            Carbide Burnishing Drill Bit, Long Shank Type

                                                                            Brand

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            MISUMI

                                                                            Product Series

                                                                            Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

                                                                            TiAlN Coated Carbide Long Drill, Straight Shank

                                                                            TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model

                                                                            Carbide Burnishing Drill, Straight Model

                                                                            TiAlN Coated Carbide Drill, Straight Shank / Stub Model

                                                                            DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model

                                                                            Carbide Burnishing Drill, Stepped Model

                                                                            Carbide Drill for Resin Machining, Straight Shank / Stub Model

                                                                            TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

                                                                            TiAlN Coated Carbide Double Margin Drill, Regular

                                                                            TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

                                                                            TiAlN Coated Carbide Drill, Regular

                                                                            Carbide Drill, Straight Shank / Regular

                                                                            TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

                                                                            TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

                                                                            TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

                                                                            TS Coated Carbide Composite Spiral Drill, Stub Model

                                                                            TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

                                                                            TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

                                                                            TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

                                                                            TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

                                                                            TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

                                                                            TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

                                                                            TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

                                                                            TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

                                                                            TiAlN Coated Carbide Drill, Stub

                                                                            TiAlN Coated Carbide Drill, Regular Model with Oil Holes

                                                                            TiAlN Coated Carbide Drill, Straight Shank / Regular

                                                                            Carbide Drill, Straight Shank / Stub

                                                                            TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

                                                                            TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

                                                                            TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

                                                                            TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

                                                                            DLC Coated Carbide Drill for Aluminum Machining, Regular

                                                                            DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub

                                                                            Carbide Drill for Aluminum Machining

                                                                            Carbide Burnishing Drill Bit, Long Shank Type

                                                                            Days to Ship 15 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more
                                                                            Hole diameter (drill diameter) D(mm)-3 ~ 108.501 ~ 84.2 ~ 6.5-2 ~ 102 ~ 131 ~ 120.38 ~ 2.70.3 ~ 131 ~ 7.53 ~ 135 ~ 123.4 ~ 10.33 ~ 123 ~ 133 ~ 133 ~ 133 ~ 133 ~ 83 ~ 133 ~ 73 ~ 130.3 ~ 63 ~ 131 ~ 80.5 ~ 7.53 ~ 133 ~ 130.8 ~ 33 ~ 103.8 ~ 11.383.4 ~ 10.31 ~ 10.5-
                                                                            Overall Length L(mm)-100 ~ 2008940 ~ 6026 ~ 7980 ~ 11040 ~ 6038 ~ 8946 ~ 12445 ~ 1183838 ~ 12434 ~ 10962 ~ 12482 ~ 11873 ~ 13650 ~ 11562 ~ 12466 ~ 10766 ~ 12449 ~ 12462 ~ 7966 ~ 12466 ~ 9146 ~ 13738 ~ 6666 ~ 12434 ~ 11720 ~ 7462 ~ 10746 ~ 13747 ~ 6760 ~ 12059 ~ 12877 ~ 13626 ~ 89-
                                                                            Groove Length L(mm)-60 ~ 1404706 ~ 3736 ~ 53-12 ~ 4312 ~ 7712 ~ 716 ~ 123 ~ 7712 ~ 6920 ~ 7744 ~ 7121 ~ 7220 ~ 5520 ~ 7120 ~ 6028 ~ 7716 ~ 7720 ~ 4128 ~ 7724 ~ 5316 ~ 782 ~ 2828 ~ 7712 ~ 753 ~ 3420 ~ 6016 ~ 786 ~ 2728 ~ 6127 ~ 7125 ~ 726 ~ 43-
                                                                            work materialgeneral steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Cast Iron[○] / Aluminum[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎]Cast Iron[○] / Aluminum[◎] / Copper[○]Resin[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Quenched and tempered steel[○] / high hardness steel[◎]Cast Iron[◎] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Quenched and tempered steel[○] / high hardness steel[◎]Quenched and tempered steel[○] / high hardness steel[◎]general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Stainless Steel[◎]Cast Iron[○] / Aluminum[◎] / Copper[○]Cast Iron[○] / Aluminum[◎] / Copper[○]Aluminum[◎]Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                            Shank Typestraight shankstraight shankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill Shankstraight shankstraight shankEnd Mill Shankstraight shankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankstraight shankEnd Mill Shank
                                                                            Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                                                            With/without Oil HoleNAAvailable / NANANANANANANANANANANANANANANANAAvailable / NANANANANANAAvailableNANAAvailableNANANANANANANANANANA
                                                                            Coating Y/NNAAvailableAvailableNAAvailableAvailableNANAAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableNANA
                                                                            Coating Type-TiAlNTiAlN-TiAlNDLC--TiAlNTiAlNTiAlNTiAlN--TiAlNTiAlN-TiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlN----TiAlNDLCDLC--

                                                                            Loading...

                                                                            1. 1

                                                                            Related Categories to Carbide Drills