(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

MISUMI Screw-Hole-Related Tools(Tool Material Type:Carbide)

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Carbide Hand Tap

      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

        DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

          TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

            TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

              TS Coated Carbide Threading Cutter, for Internal Metric Threads

                Carbide Spiral Tap

                Brand

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                Product Series

                Carbide Hand Tap

                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                TS Coated Carbide Threading Cutter, for Internal Metric Threads

                Carbide Spiral Tap

                Days to Ship 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                Screw size (Nominal)M3 ~ M10M3 ~ M20M3 ~ M16M2 ~ M12M1.4 ~ M20M3 ~ M12M3 ~ M10
                Screw TypesMeterMeterMeterMeterMeterMeterMeter
                work materialSteel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]
                Pitch (P), Number of Threading(mm)0.5 ~ 1.50.5 ~ 2.50.5 ~ 20.4 ~ 1.750.3 ~ 2.50.5 ~ 1.750.5 ~ 1.5
                Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                Tap TypeHand TapThread cutterThread cutterThread cutterThread cutterThread cutterSpiral Tap
                Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind hole
                Chamfer threads (Lcf)1.5P ~ 3P-----1.5P ~ 2.5P
                Coating Type-TiAlNDLCTiAlNTiAlNFor High Hardness (Silicon Group)-
                Coating Y/NNAAvailableAvailableAvailableAvailableAvailableNA
                Overall Length (L)(mm)46 ~ 7557 ~ 11557 ~ 9258 ~ 7339 ~ 10548 ~ 7446 ~ 75

                Loading...

                1. 1

                Related Categories to Screw-Hole-Related Tools