NABEYA Locating Elements (for Positioning Parts / Manual Tightening)

• 

  Q Lock (Screw Type) Locating Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Clamp Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Locating Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Flange Locating Pin (Diamond Pin)

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Days to Ship:	14 Day(s) or more

• 

  Locating Pin (Adjustable Diameter Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Days to Ship:	14 Day(s) or more

• 

  Height Block

  NABEYA

  Material is FCD450, and heat treatment is yakizen.
  Useful for bulking up large workpieces and as a clamp table.

  Days to Ship:	16 Day(s) or more

• 

  Locate Plate

  NABEYA

  Material is S50C, Heat treatment is hardening, Surface treatment is black oxide coating.
  Helps with positioning.

  Days to Ship:	14 Day(s) or more

• 

  Stopper Block

  NABEYA

  For positioning the workpiece, pushing laterally, etc.

  Days to Ship:	14 Day(s) or more

• 

  Guide Block (Straight Type)【2 Pieces Per Package】

  NABEYA

  Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.

  Days to Ship:	14 Day(s) or more

• 

  Locating Pin Type B with Grip

  NABEYA

  SUM22/quenched HRC locating pin B with grip.

  Days to Ship:	14 Day(s) or more

• 

  Height Cylinder

  NABEYA

  SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.

  Days to Ship:	14 Day(s) or more

• 

  Flange Locating Pin (Round

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Days to Ship:	14 Day(s) or more

• 

  Reference Seat (Flange Provided)

  NABEYA

  [Features]
  · Specification with air holes can be used to verify seating (O-ring not included).
  · The diameter of the workpiece support is large, allowing load from the top to be firmly supported

  Days to Ship:	14 Day(s) or more

• 

  Reference Seat (Air Hole with Flange Provided)

  NABEYA

  Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.

  Days to Ship:	14 Day(s) or more

• 

  Reference Seat (Round Seat)

  NABEYA

  Material is SCM420, Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).

  Days to Ship:	14 Day(s) or more

• 

  Eccentric rough guide

  NABEYA

  A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.

  Days to Ship:	14 Day(s) or more

• 

  Rough Guide L-Plate for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.

  Days to Ship:	14 Day(s) or more

• 

  Extension Tool for Q Lock (Side Type)

  NABEYA

  Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.

  Days to Ship:	14 Day(s) or more

• 

  Rough Guide for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Days to Ship:	14 Day(s) or more

• 

  Rough Guide L-Plate for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.

  Days to Ship:	16 Day(s) or more

• 

  Rough Guide Pin for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Clamp Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Diamond Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock Coupling Socket

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock Coupling Plug

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Days to Ship:	14 Day(s) or more

• 

  Height Cylinder for Q Lock

  NABEYA

  Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.

  Days to Ship:	14 Day(s) or more

• 

  Rough Guide for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Days to Ship:	14 Day(s) or more

• 

  Rough Guide Pin for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Days to Ship:	14 Day(s) or more

• 

  T-Slot Block

  NABEYA

  Convenient for clamp table and raising blocks of large machinery workpieces.

  Days to Ship:	16 Day(s) or more

• 

  Adjustment Stop

  NABEYA

  For stoppers. Rotation Stopper

  Days to Ship:	32 Day(s) or more

• 

  Guide Block (Stepped Type)【2 Pieces Per Package】

  NABEYA

  It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.

  Days to Ship:	14 Day(s) or more

• 

  Locating Pin Type A with Grip

  NABEYA

  SUM22/quenched HRC locating pin A with grip.

  Days to Ship:	16 Day(s) or more

• 

  Bar Plate (T-Groove) Type

  NABEYA

  S50C/quenched HRC50 +5/0 bar plate (T groove type).

  Days to Ship:	16 Day(s) or more

• 

  Flange Locating Pin (Diamond Pin S)

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Days to Ship:	16 Day(s) or more

• 

  Flex Support

  NABEYA

  Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin A Type (Self Cut Product)

  NABEYA

  Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin A Type (Finishing Product)

  NABEYA

  Outer diameters A and B have ground finish (finished product)

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin B Type (Self Cut Product)

  NABEYA

  Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin B Type (Finishing Product)

  NABEYA

  This product comes with A-type and B-type locating pins with grinding finish.

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Adjustable Round Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Ball DLC)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Ball DLC Diameter)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  Days to Ship:	16 Day(s) or more

• 

  Locate Cylinder

  NABEYA

  Body: SCM420 / rhombic nut: S45C-D, Hardened HRC56 ±2 locating cylinder (positioning stopper).

  Days to Ship:	18 Day(s) or more

• 

  Locating Pin

  NABEYA

  Socket screw fixing type positioning pin. Can be used repeatedly. Mounting bolts are sold separately. Use socket screws.

  Days to Ship:	16 Day(s) or more

• 

  Work Stopper

  NABEYA

  S45C/quenched HRC30±5 work stopper.

  Days to Ship:	16 Day(s) or more

Loading...