(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem.
Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS.
Untuk informasi lebih lanjut, silakan hubungi Customer Service :
TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008.
Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
NANSIN Wheels（Wheel Type：Outer Ring + Wheel）
| Days to Ship |
|
|---|
-
NANSIN
Rubber wheels for general-purpose casters.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Wheel hardness is 65HS.
·The operating temperature is -40 to +100°C.
[Applications]
·Ideal as a caster wheel.Days to Ship: 13 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: TM·KM·SM·SMO·GM·GMO·EXM·PXM·AN.
·wheel hardness: 70HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·For casters used for fixtures, furniture, wagons, medical equipment, various kitchen equipment, etc.Days to Ship: 12 Day(s) or more -
NANSIN
Urethane wheels for general-purpose casters.
[Features]
·It has excellent wear resistance and oil resistance, and has high mechanical strength while providing cushioning properties, so it can withstand a large amount of load.
·It has the advantage of minimizing contamination of the floor surface.
·Part number used: STM·SKM·SKM-T·UTM·UKM.
·wheel hardness: 92HS.
·Operating Temperature: -40 to +80°C .Days to Ship: 12 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: STC·SKC·SKC-T·SSC·SPC·UTC·UKC.
·wheel hardness: 65HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·Wheels for casters used in various transport carts, mesh pallets, and special parts transport pallets.
·Wheels for casters used in various factory equipment, wagons, various kitchen equipment, etc.Days to Ship: 13 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: STC·SKC·SSC.
·wheel hardness: 65HS.
·Operating Temperature: -40°C to +100°C .
[Applications]
·Various transport carts, mesh pallets, special pallets for transporting parts, and various factory equipment.
·Wheels for casters used in wagons and various kitchen equipment.Days to Ship: 13 Day(s) or more -
NANSIN
Rubber wheels for general-purpose casters.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Part number used: STC (VS-100 only), SKC (VS-100 only), STM, SKM, SKM-T, SCP, SCJ, UTC, UKC
·wheel hardness: 65HS.
·Operating Temperature: -40 to +100°C .
·steel foil.
·Uses commercial bearings.Days to Ship: 12 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: SMO·GMO·EXMO
·wheel hardness: 70HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·For casters used in fixtures, furniture, wagons, medical equipment, transportation equipment, and various devices.Days to Ship: 13 Day(s) or more -
NANSIN
Nylon wheels with excellent water and oil resistance.
[Features]
·It has excellent water and oil resistance, and its high hardness makes it resistant to permanent deformation.
·Part number used: STC/SKC/SKC-T/SSC/SPC/SU-STC/SU-SKC/30 series.
·Operating Temperature: -10 to +120 degrees.
[Applications]
·Wheels for casters used in various transport carts, mesh pallets, and special parts transport pallets.
·Wheels for casters used in various factory equipment, wagons, various kitchen equipment, etc.Days to Ship: 12 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has cushioning properties and high mechanical strength, so it can withstand a large load. It also has the advantage of minimizing contamination of the floor surface.
·Part number used: STC/SMS/GMS/TM/KM/SM/GM/10 series.
·wheel hardness: 90HS.
·Operating Temperature: -40 to +80 degrees.
[Applications]
·Wheels for casters used for various transportation carts, mesh pallets, special pallets for parts transportation, etc.
·Wheels for casters used in various factory equipment, wagons, various kitchen equipment, etc.Days to Ship: 13 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has high mechanical strength and excellent wear resistance and oil resistance.
·Part number used: SU-TEL, SU-KEL, SU-SM, TM, KM, SM, GM, TEL, KEL, SEL
·Hardness: 98HS
·Operating Temperature: -10 to +80 degrees
[Applications]
·Used for transportation equipment such as food machinery, kitchen equipment, chemical and pharmaceutical machinery, wagons, dolly carts, etc.Days to Ship: 13 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·wheel hardness: 90HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·Caster wheels used for fixtures, furniture, wagons, medical equipment, various kitchen equipment, etc.Days to Ship: 12 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has high mechanical strength and excellent wear and oil resistance.
·Part number used: STH·SKH.
·wheel hardness: 95HS.
·Operating Temperature: -40 to +80 degrees.
[Applications]
·Wheels for casters used in high-load transport pallets, semiconductor manufacturing equipment, and various types of machinery.Days to Ship: 12 Day(s) or more -
NANSIN
A rubber wheel.
[Features]
· Features a stainless steel wheel, rubber wheel, and stainless steel needle bearing.
· Filled with cold-resistant greaseDays to Ship: 15 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
[Applications]
·Wheels for casters used in various transport carts, special pallets for transporting parts, various factory equipment, etc.Days to Ship: 13 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: SCP·TH·KH·SH.
·wheel hardness: 65HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·For casters used in fixtures, furniture, wagons, medical equipment, transportation equipment, and various devices.Days to Ship: 58 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has high mechanical strength and can withstand a large load.
·Excellent wear resistance and oil resistance.
[Applications]
·For casters used in various transport carts, roll box pallets, fixtures, etc.Days to Ship: 16 Day(s) or more -
NANSIN
Industrial pneumatic rubber wheels.
[Features]
·Pneumatic rubber wheels with excellent running performance.
·Part number used: STM,SKM.
·wheel hardness: 60HS.
·Operating Temperature: -10 to +60 degrees.
[Applications]
·The pneumatic rubber wheels suppress vibrations to objects while driving, and can be widely used even on uneven road surfaces.Days to Ship: 12 Day(s) or more -
NANSIN
Nylon wheels with stainless steel bearings.
[Features]
·It has excellent water and oil resistance, and its high hardness makes it resistant to permanent deformation.
·Part number used: SU-STC·SU-SKC.
·Operating Temperature: -10 to +120 degrees.
[Applications]
·Wheels for casters used in food machinery, kitchen equipment, chemical and pharmaceutical machinery, and transport equipment for wagons.
·Wheels for casters used in transportation equipment such as dollies.Days to Ship: 15 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Part number used: STH·SKH.
·wheel hardness: 80HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·Wheels for casters used in high-load transport pallets, semiconductor manufacturing equipment, and various types of machinery.Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 13 Day(s) or more -
Days to Ship: 18 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 13 Day(s) or more -
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Wheel Outer Dia.(Ø) |
| Max. Load / Allowable Load(daN) |
| Max. Load / Allowable Load(kg) |
| Tire Material |
| Width of Wheel(mm) |
| Wheel Type |
| Bearing |
| Width of Hub(mm) |
| Hole Diameter(Ø) |
| Wheel Material |
| Wheel Width (Dual-Wheel Type) × 2(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN |
| Product Series | ||||||||||||||||||||||||||||
| Days to Ship | 13 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 15 Day(s) or more | 13 Day(s) or more | 58 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 15 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more |
| Wheel Outer Dia.(Ø) | 125 ～ 150 | 75 ～ 150 | 75 ～ 250 | 125 ～ 150 | 100 | 100 ～ 250 | 102 | 100 ～ 150 | 75 ～ 100 | 100 ～ 125 | 125 | 100 | 125 ～ 150 | 75 | 100 | 130 | 225 ～ 293 | 100 ～ 125 | 100 ～ 150 | 125 ～ 150 | 75 | 125 ～ 150 | 65 | 100 | 100 | 40 ～ 125 | 100 | 100 ～ 200 |
| Max. Load / Allowable Load(daN) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Load / Allowable Load(kg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tire Material | Rubber | Rubber | Urethane | Rubber | Rubber | Rubber | Rubber | Nylon | Urethane | Urethane | Rubber | Urethane | Rubber | Rubber | Rubber | Urethane | Rubber | Nylon | Rubber | Rubber | Rubber | Plastic | Rubber | Plastic | Plastic | Plastic | Plastic | Urethane |
| Width of Wheel(mm) | 38 ～ 40 | 20 ～ 28 | 32 ～ 45 | 38 ～ 40 | 32 | 32 ～ 50 | 25 | 29 ～ 35 | 27 | 25 | 31 | 50 | 38 ～ 42 | 32 | 32 | 38 | 63 ～ 96 | 29 ～ 35 | 50 | 32 | 27 | 27 | 20 | 32 | 27 | 18 ～ 27 | 32 | 32 ～ 42 |
| Wheel Type | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel |
| Bearing | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Not Provided | Provided | Provided |
| Width of Hub(mm) | 55 | 31.5 ～ 43.5 | 35 ～ 64 | 55 | 42 | 42 ～ 64 | 32 | 42 ～ 56 | 32 | 31 ～ 42 | 42 | 57 | 56 | 36 | 41 | 55 | 82 ～ 100 | 45 ～ 56 | 57 ～ 60 | 42 ～ 56 | 32 | 41 | 25 | 42 | 31 | 20 ～ 31 | 42 | 54 ～ 70 |
| Hole Diameter(Ø) | 12 | 8 ～ 9.5 | 10 ～ 25 | 12 | 12 | 12 ～ 25 | 8 | 12 | 8 | 8 ～ 9.5 | 9.5 | 12 | 12 | 10 | 9.5 | 12 | 20 ～ 25 | 12 | 12 ～ 20 | 12 | 8 | 12 | 6 | 12 | 8 | 6 ～ 8 | 12 | 12 ～ 20 |
| Wheel Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Width (Dual-Wheel Type) × 2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Wheel Outer Dia.(Ø)
-
Max. Load / Allowable Load(daN)
-
Max. Load / Allowable Load(kg)
- 30
- 40
- 45
- 50
- 60
- 65
- 70
- 75
- 80
- 82
- 85
- 90
- 100
- 102
- 110
- 115
- 120
- 122.4
- 123
- 130
- 132.6
- 135
- 138.7
- 142.8
- 143
- 150
- 153.0
- 160
- 163.2
- 164
- 170
- 174
- 175
- 180
- 184
- 195
- 200
- 204
- 205
- 210
- 220
- 225
- 230
- 250
- 255
- 260
- 270
- 280
- 290
- 295
- 300
- 306
- 320
- 325
- 330
- 340
- 345
- 350
- 360
- 380
- 385
- 390
- 400
- 408
- 410
- 430
- 440
- 445
- 450
- 480
- 500
- 520
- 530
- 535
- 550
- 560
- 570
- 580
- 600
- 610
- 615
- 620
- 640
- 650
- 670
- 680
- 685
- 695
- 700
- 750
- 780
- 800
- 805
- 820
- 830
- 840
- 850
- 870
- 900
- 950
- 960
- 980
- 1000
- 1100
- 1130
- 1150
- 1200
- 1250
- 1330
- 1350
- 1400
- 1500
- 1700
- 2000
- 2500
- 4000
- 6000
-
Tire Material
-
Width of Wheel(mm)
-
Wheel Type
- Integrated
- Outer Ring + Wheel
-
Bearing
- Provided
- Not Provided
-
Width of Hub(mm)
-
Hole Diameter(Ø)
-
Wheel Material
- Steel
- Aluminum
- Plastic
-
Wheel Width (Dual-Wheel Type) × 2(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (2)
- ESCO (74)
- NANSIN (28)
- GIFU SANKEN KOGYO (27)
- SISIKU ADDKREIS (22)
- TRUSCO NAKAYAMA (11)
- TOSEI SHARYO (11)
- YODONO (9)
- TOUHOKU SHARYO (6)
- YUEI CASTER (6)
- INOAC (3)
- OHINDUSTRIAL (2)
- YAHATA (1)
- QUADRANT POLYPENCO JAPAN (0)
CAD
-
- 2D
- 3D
Related Categories to Wheels
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy