(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

OSG Carbide Square End Mills

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
Brand
Product Series
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

    WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

      Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

        Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS

          ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

            ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS

              Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

                WX Coated Roughing_WX-RESF

                  ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

                    Carbide End Mills Diamond Coated 2 Flutes High Helix Short_DIA-EHDS

                      Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE

                        ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_WX-EDS

                          Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL

                            Carbide End Mills DLC Coated 3 Flutes Short_DLC-ETS

                              ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML

                                Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS

                                  ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS

                                    Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL

                                      Regular Grain Carbide End Mills 4 Flutes Long for Graphite_GF-EML

                                        ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

                                          2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

                                            Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF

                                              AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type)

                                                Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE

                                                  Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE

                                                    Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

                                                      Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL

                                                        2-Flute Keyway (OH1) MG-EKD [Alterations Available]

                                                          2-Flute Keyway (OL1) MG-EKD [Alterations Available]

                                                            DIA Coated 2 Flutes Short_DIA-EDS

                                                              Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS

                                                                ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6

                                                                  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS

                                                                    2-flute short type MG-EDS [Alterations Available]

                                                                      ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub_FX-MG-EDSS

                                                                        ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS

                                                                          ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS

                                                                            Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN

                                                                              Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3

                                                                                ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long_FX-MG-EDL

                                                                                  Micro Grain Carbide Straight Flutes End Mills 2 Flutes for Reforming_MG-STDN

                                                                                    Carbide End Mills CrN coated 2 Flutes Miniature Short for Copper, Alminum Alloys and Plastic_CRN-EDS-3

                                                                                      Carbide End Mills CrN coated 2 Flutes Miniature Long for Copper, Alminum Alloys and Plastic_CRN-EDL-4

                                                                                        Regular Grain Carbide End Mills 3 Flutes Multi-Purpose for Copper and Aluminum Alloys_CA-MFE

                                                                                          Regular Grain Carbide End Mills 2 Flutes Long for Copper & Aluminum Alloys_CA-RG-EDL

                                                                                            Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS

                                                                                            Brand

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            Product Series

                                                                                            WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

                                                                                            Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

                                                                                            Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

                                                                                            ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS

                                                                                            Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

                                                                                            WX Coated Roughing_WX-RESF

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

                                                                                            Carbide End Mills Diamond Coated 2 Flutes High Helix Short_DIA-EHDS

                                                                                            Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE

                                                                                            ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_WX-EDS

                                                                                            Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL

                                                                                            Carbide End Mills DLC Coated 3 Flutes Short_DLC-ETS

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML

                                                                                            Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS

                                                                                            ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS

                                                                                            Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL

                                                                                            Regular Grain Carbide End Mills 4 Flutes Long for Graphite_GF-EML

                                                                                            ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

                                                                                            2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

                                                                                            Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF

                                                                                            AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type)

                                                                                            Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE

                                                                                            Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE

                                                                                            Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

                                                                                            Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL

                                                                                            2-Flute Keyway (OH1) MG-EKD [Alterations Available]

                                                                                            2-Flute Keyway (OL1) MG-EKD [Alterations Available]

                                                                                            DIA Coated 2 Flutes Short_DIA-EDS

                                                                                            Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS

                                                                                            2-flute short type MG-EDS [Alterations Available]

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub_FX-MG-EDSS

                                                                                            ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS

                                                                                            Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN

                                                                                            Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long_FX-MG-EDL

                                                                                            Micro Grain Carbide Straight Flutes End Mills 2 Flutes for Reforming_MG-STDN

                                                                                            Carbide End Mills CrN coated 2 Flutes Miniature Short for Copper, Alminum Alloys and Plastic_CRN-EDS-3

                                                                                            Carbide End Mills CrN coated 2 Flutes Miniature Long for Copper, Alminum Alloys and Plastic_CRN-EDL-4

                                                                                            Regular Grain Carbide End Mills 3 Flutes Multi-Purpose for Copper and Aluminum Alloys_CA-MFE

                                                                                            Regular Grain Carbide End Mills 2 Flutes Long for Copper & Aluminum Alloys_CA-RG-EDL

                                                                                            Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS

                                                                                            Days to Ship 8 Day(s) or more 1 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more Same day or more 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 2 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) or more Same day or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) 8 Day(s) or more 8 Day(s) or more 1 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            Blade diameter (D)(φ)1.5 ~ 301 ~ 201 ~ 303 ~ 303 ~ 120.1 ~ 1214 ~ 253 ~ 2010.1 ~ 11.90.1 ~ 309 ~ 123 ~ 253 ~ 203 ~ 302 ~ 253 ~ 122 ~ 122 ~ 120.1 ~ 60.5 ~ 126 ~ 12H6 ~ 120.1 ~ 120.1 ~ 200.2 ~ 123 ~ 123 ~ 123 ~ 120.5 ~ 120.5 ~ 120.2 ~ 2.50.2 ~ 301 ~ 253 ~ 161 ~ 1263 ~ 120.1 ~ 33 ~ 301 ~ 121 ~ 120.5 ~ 31 ~ 33 ~ 123 ~ 20
                                                                                            Blade length (ℓ)(mm)5 ~ 552.5 ~ 382.5 ~ 4520 ~ 1124.5 ~ 180.15 ~ 1826 ~ 458 ~ 38280.2 ~ 6019 ~ 2612 ~ 678 ~ 3820 ~ 1126 ~ 454.5 ~ 1820 ~ 13020 ~ 1300.15 ~ 90.7 ~ 1813 ~ 269 ~ 180.15 ~ 180.3 ~ 600.8 ~ 4820 ~ 905 ~ 165 ~ 161 ~ 261 ~ 240.3 ~ 3.70.4 ~ 452.5 ~ 454.5 ~ 241.5 ~ 181510 ~ 340.2 ~ 812 ~ 673.5 ~ 301.5 ~ 181.5 ~ 84 ~ 1512 ~ 408 ~ 38
                                                                                            Underneck length (ℓ1)(mm)-----0.3 ~ 60----------25 ~ 8025 ~ 800.3 ~ 602.5 ~ 60-18 ~ 60--------1.5 ~ 5---------2.5 ~ 30----
                                                                                            Shank diameter (d)(mm)6 ~ 324 ~ 204 ~ 326 ~ 326 ~ 124 ~ 1212 ~ 256 ~ 2010 ~ 124 ~ 3210 ~ 126 ~ 256 ~ 206 ~ 324 ~ 256 ~ 126 ~ 126 ~ 124 ~ 66 ~ 126 ~ 126 ~ 124 ~ 124 ~ 204 ~ 126 ~ 126 ~ 126 ~ 124 ~ 124 ~ 1263 ~ 324 ~ 256 ~ 164 ~ 1256 ~ 1236 ~ 324 ~ 126 ~ 12346 ~ 126 ~ 20
                                                                                            Number of flutes(sheet)4 ~ 8242324 ~ 622222344424224422222222222222222222223
                                                                                            Overall Length (L)(mm)60 ~ 14040 ~ 10540 ~ 12560 ~ 22550 ~ 7545 ~ 14085 ~ 12050 ~ 12575 ~ 8045 ~ 14070 ~ 7550 ~ 14050 ~ 10560 ~ 22540 ~ 12050 ~ 75100 ~ 200100 ~ 20045 ~ 12060 ~ 14060 ~ 8060 ~ 11045 ~ 7545 ~ 13045 ~ 10060 ~ 15045 ~ 7545 ~ 7540 ~ 7540 ~ 755040 ~ 12540 ~ 12050 ~ 10040 ~ 759050 ~ 904050 ~ 14545 ~ 8050 ~ 804045 ~ 5050 ~ 9050 ~ 105
                                                                                            work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Graphite[◎]Graphite[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Aluminum[○] / Copper[◎] / Resin[◎]general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]Aluminum[◎] / Copper[○] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[○] / Copper[◎] / Resin[◎]Aluminum[○] / Copper[◎] / Resin[◎]Aluminum[○] / Copper[◎] / Resin[◎]Aluminum[◎] / Copper[◎] / Resin[○]Aluminum[◎] / Copper[◎] / Resin[○]
                                                                                            Torsion Angle (θ)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°) / Powerful Torsion (45°-60°)Weak torsion (15 to 25˚)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Variable leadVariable leadStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)No torsionStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)
                                                                                            Machining ApplicationPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Inclined CutsCountersinking-Plane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Inclined CutsSide / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts
                                                                                            CoatingTiAlNNon-CoatedFor General Steels (AlCrN, etc.)TiAlNTiAlNFor General Steels (AlCrN, etc.)TiAlNTiAlNDia CoatFor General Steels (AlCrN, etc.)TiAlNNon-CoatedDLCTiAlNNon-CoatedTiAlNNon-CoatedNon-CoatedTiAlNCrN--For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)Non-CoatedNon-CoatedNon-CoatedDia CoatDLCTiAlNTiAlNNon-CoatedTiAlNTiAlNTiAlNNon-CoatedNon-CoatedTiAlNNon-CoatedCrNCrNCrNNon-CoatedNon-Coated
                                                                                            Blade tip shapeWith LeadWith LeadSharp Edge / With LeadWith LeadWith LeadSharp Edge / With LeadC planeWith Lead-Sharp EdgeSharp EdgeSharp Edge / With LeadWith LeadWith LeadSharp Edge / With LeadWith LeadWith LeadWith LeadSharp Edge / With LeadWith LeadC plane-Sharp EdgeSharp Edge / With LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith LeadSharp Edge / With LeadSharp EdgeSharp Edge / With LeadSharp EdgeWith LeadSharp EdgeSharp EdgeSharp Edge / With LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith Lead
                                                                                            TypeSquareSquareSquareSquareSquareLong-Neck SquareRoughingSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareLong-Neck SquareLong-Neck SquareRoughingLong-Neck SquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquare

                                                                                            Loading...

                                                                                            Related Categories to Carbide Square End Mills