(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

OSG Screw-Hole-Related Tools(Chamfer threads (Lcf):1.5P)

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Hand Tap for General Use HT

      Model A Tap Series, Spiral Tap A-SFT

        Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

          Straight Flutes Tap for Stainless Steels_EX-SUS-HT

            Tungsten Carbide Straight Flutes Tap_OTT

              Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT

                Spiral Tap Short Chamfer type_EX-SC-SFT

                  Tungsten Carbide Spiral Tap_OT-SFT

                    Straight Flutes Tap・Zero Tap for Die Castings_VP-DC-HT

                      Straight Flutes Insert Screw Thread Tap_HL-HT

                        Oversize Straight Flutes Tap_EX-OST

                          Hand Tap for General Use Long Shank EX-LT

                            Hand Tap for General Use Oxidized H-HT

                              Straight Flutes Tap for Cast Iron_EX-FC-HT

                                Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT

                                Brand

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                OSG

                                Product Series

                                Hand Tap for General Use HT

                                Model A Tap Series, Spiral Tap A-SFT

                                Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

                                Straight Flutes Tap for Stainless Steels_EX-SUS-HT

                                Tungsten Carbide Straight Flutes Tap_OTT

                                Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT

                                Spiral Tap Short Chamfer type_EX-SC-SFT

                                Tungsten Carbide Spiral Tap_OT-SFT

                                Straight Flutes Tap・Zero Tap for Die Castings_VP-DC-HT

                                Straight Flutes Insert Screw Thread Tap_HL-HT

                                Oversize Straight Flutes Tap_EX-OST

                                Hand Tap for General Use Long Shank EX-LT

                                Hand Tap for General Use Oxidized H-HT

                                Straight Flutes Tap for Cast Iron_EX-FC-HT

                                Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT

                                Days to Ship 2 Day(s) or more 12 Day(s) or more 8 Day(s) or more Same day 2 Day(s) or more 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 15 Day(s) 12 Day(s) or more 1 Day(s) or more 17 Day(s) or more 12 Day(s) or more 1 Day(s) or more 8 Day(s) or more
                                Specifications
                                • STOCK
                                • STOCK
                                                • STOCK
                                                    • STOCK
                                                      Screw size (Nominal)No.0UN ~ M38M3 ~ M12M3 ~ M20M2.5 ~ M5M1.4 ~ M20No.6UNM12 ~ M22M3 ~ M12M6 ~ M12No.10UN ~ M6M3 ~ M12M12M16M3 ~ M10M3 ~ M12
                                                      Screw TypesMeter / unified / Whitworth / Sewing MachineMeterMeterMeterMeterunifiedMeterMeterMeterMeter / unifiedMeterMeterMeterMeterMeter
                                                      work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]
                                                      Pitch (P), Number of Threading(mm)0.25 ~ 800.5 ~ 1.750.5 ~ 2.50.45 ~ 0.80.3 ~ 2.5321.75 ~ 2.50.5 ~ 1.751 ~ 1.751 ~ 240.5 ~ 1.751.251.50.5 ~ 1.50.5 ~ 1.75
                                                      Tool Material TypeHigh-speed steelPowder high-speed steelCarbideVanadium High-Speed SteelCarbideHigh-speed steelVanadium High-Speed SteelCarbidePowder high-speed steelHigh-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel
                                                      Tap TypeHand TapSpiral TapHand TapHand TapHand TapHand TapSpiral TapSpiral TapHand TapHand TapHand TapHand TapHand TapHand TapHand Tap
                                                      Hole typeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole
                                                      Chamfer threads (Lcf)1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P1.5P
                                                      Coating TypeNon-CoatedOtherNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiCNNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated
                                                      Coating Y/NNAAvailableNANANANANANAAvailableNANANANAAvailableNA
                                                      Overall Length (L)(mm)30 ~ 16546 ~ 82100 ~ 15044 ~ 6034 ~ 10510082 ~ 11546 ~ 8262 ~ 8262 ~ 8246 ~ 821509546 ~ 7546 ~ 82

                                                      Loading...

                                                      1. 1

                                                      Related Categories to Screw-Hole-Related Tools