(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

OSG Spiral Taps(Screw size (Nominal):M4)

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 15 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Spiral Tap for General Application_EX-SFT

      Model A Tap Series, Spiral Tap A-SFT

        Spiral Tap for General Application (with OX)_EX-H-SFT

          Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

            CPM Spiral Tap_CPM-SFT

              Spiral Tap for Aluminum_EX-AL-SFT

                Tungsten Carbide Spiral Tap_OT-SFT

                  HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT

                    Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

                      Spiral Tap TiN Coating TIN-SFT

                        CPM Spiral Tap V Coated_VP-SFT

                          Spiral Tap V Coating V-SFT

                            Spiral Tap General Purpose, Long Shank EX-LT-SFT

                              Spiral Tap High-Speed Synchronizing Tap HS-SFT

                                Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

                                  Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

                                    Spiral ULTRA SYNCHRO Tap for Aluminum_US-AL-SFT

                                      Spiral Tap with Long Shank_A-LT-SFT

                                        General Purpose Long ShankSpiral Tap (for Metric Threads)

                                        Brand

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        OSG

                                        Product Series

                                        Spiral Tap for General Application_EX-SFT

                                        Model A Tap Series, Spiral Tap A-SFT

                                        Spiral Tap for General Application (with OX)_EX-H-SFT

                                        Spiral Tap TiN coated with Long Shank_TIN-LT-SFT

                                        CPM Spiral Tap_CPM-SFT

                                        Spiral Tap for Aluminum_EX-AL-SFT

                                        Tungsten Carbide Spiral Tap_OT-SFT

                                        HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT

                                        Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

                                        Spiral Tap TiN Coating TIN-SFT

                                        CPM Spiral Tap V Coated_VP-SFT

                                        Spiral Tap V Coating V-SFT

                                        Spiral Tap General Purpose, Long Shank EX-LT-SFT

                                        Spiral Tap High-Speed Synchronizing Tap HS-SFT

                                        Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT

                                        Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT

                                        Spiral ULTRA SYNCHRO Tap for Aluminum_US-AL-SFT

                                        Spiral Tap with Long Shank_A-LT-SFT

                                        General Purpose Long ShankSpiral Tap (for Metric Threads)

                                        Days to Ship 1 Day(s) or more 12 Day(s) or more 1 Day(s) or more 12 Day(s) or more 2 Day(s) 2 Day(s) 12 Day(s) or more 12 Day(s) or more 12 Day(s) 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 2 Day(s) 12 Day(s) or more 1 Day(s) 12 Day(s) or more 8 Day(s) or more 2 Day(s)
                                        Specifications
                                          • STOCK
                                          • STOCK
                                              • STOCK
                                                                • STOCK
                                                                      Screw size (Nominal)M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4
                                                                      Screw TypesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                                      work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Nickel-based alloy (Inconel, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]-
                                                                      Pitch (P), Number of Threading(mm)0.7 ~ 0.750.5 ~ 0.70.70.70.70.70.70.70.70.70.70.70.70.70.70.70.70.5 ~ 0.70.7
                                                                      Tool Material TypeVanadium High-Speed SteelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelVanadium High-Speed SteelCarbidePowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steel-
                                                                      Tap TypeSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral Tap
                                                                      Hole typeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor through holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind hole
                                                                      Chamfer threads (Lcf)2.5P1.5P ~ 2.5P2.5P2.5P3P2.5P1.5P ~ 2.5P2.5P2.5P2.5P2.5P2.5P2.5P3P3P2.5P3P2.5P2.5P
                                                                      Coating TypeNon-CoatedOtherNon-CoatedTiNNon-CoatedNon-CoatedNon-CoatedOtherTiNTiNTiCNOtherNon-CoatedTiNTiNNon-CoatedOtherOtherNon-Coated
                                                                      Coating Y/NNAAvailableNAAvailableNANANAAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableNAAvailableAvailable-
                                                                      Overall Length (L)(mm)5252521005252525252525252100 ~ 150521005252100 ~ 150100

                                                                      Loading...

                                                                      1. 1

                                                                      Related Categories to Spiral Taps