(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

OSG Point Taps(Screw Types:Meter)

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 15 Day(s) or Less
  • 17 Day(s) or Less
  • 27 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Model A Tap Series, Pointed Tap A-POT

      Pointed Tap Series, General Purpose EX-POT

        LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

          Pointed Tap Series V Coating V-POT

            Spiral Pointed Tap with Long Shank_A-LT-POT

              HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT

                Pointed Tap Series TiN Coating TIN-POT

                  Pointed Tap TiN coated with Long Shank_TIN-LT-POT

                    Pointed Tap V coated with Long Shank_V-LT-POT

                      LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

                        Pointed Tap for Stainless Steel use EX-SUS-POT

                          Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

                            Pointed Tap for General Application (with OX)_EX-H-POT

                              Long Shank・General Application_EX-LT-POT

                                LH Spiral SYNCHRO Tap_HS-RFT

                                  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                                    Pointed Tap for Deep Holes EX-DH-POT

                                      Pointed Tap for Copper_CU-POT

                                        Pointed Tap for Difficult-To-Cut Materials CPM-POT

                                          CPM Pointed Tap with Long Shank_CPM-LT-POT

                                            Pointed Tap for Thin Plate EX-SS-POT

                                              General Application(with OX)_EX-LT-H-POT

                                                Pointed Tap Series Ultra Synchro Tap US-AL-RFT

                                                Brand

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                OSG

                                                Product Series

                                                Model A Tap Series, Pointed Tap A-POT

                                                Pointed Tap Series, General Purpose EX-POT

                                                LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

                                                Pointed Tap Series V Coating V-POT

                                                Spiral Pointed Tap with Long Shank_A-LT-POT

                                                HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT

                                                Pointed Tap Series TiN Coating TIN-POT

                                                Pointed Tap TiN coated with Long Shank_TIN-LT-POT

                                                Pointed Tap V coated with Long Shank_V-LT-POT

                                                LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

                                                Pointed Tap for Stainless Steel use EX-SUS-POT

                                                Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

                                                Pointed Tap for General Application (with OX)_EX-H-POT

                                                Long Shank・General Application_EX-LT-POT

                                                LH Spiral SYNCHRO Tap_HS-RFT

                                                LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                                                Pointed Tap for Deep Holes EX-DH-POT

                                                Pointed Tap for Copper_CU-POT

                                                Pointed Tap for Difficult-To-Cut Materials CPM-POT

                                                CPM Pointed Tap with Long Shank_CPM-LT-POT

                                                Pointed Tap for Thin Plate EX-SS-POT

                                                General Application(with OX)_EX-LT-H-POT

                                                Pointed Tap Series Ultra Synchro Tap US-AL-RFT

                                                Days to Ship 8 Day(s) or more 1 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 2 Day(s) or more 8 Day(s) or more 1 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 2 Day(s) or more 12 Day(s) or more 2 Day(s) or more 12 Day(s) or more 1 Day(s) or more 8 Day(s) or more 2 Day(s) or more
                                                Specifications
                                                  • STOCK
                                                                      • STOCK
                                                                                    • STOCK
                                                                                        Screw size (Nominal)M1.4 ~ M24M1.4 ~ M36M3 ~ M30M3 ~ M10M2 ~ M24M5 ~ M8M1.4 ~ M42M3 ~ M24M4 ~ M6M2 ~ M6M1.4 ~ M24M3 ~ M6M1.4 ~ M42M3 ~ M20M3 ~ M14M3 ~ M14M2.5 ~ M10M3M1.4 ~ M14M8 ~ M12M2 ~ M12M3 ~ M20M5 ~ M24
                                                                                        Screw TypesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                                                        work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Nickel-based alloy (Inconel, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Stainless steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○]High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]
                                                                                        Pitch (P), Number of Threading(mm)0.25 ~ 30.3 ~ 40.5 ~ 3.50.5 ~ 1.250.25 ~ 30.8 ~ 1.250.3 ~ 4.50.5 ~ 30.7 ~ 10.4 ~ 10.3 ~ 30.5 ~ 10.3 ~ 4.50.5 ~ 20.5 ~ 20.5 ~ 20.45 ~ 1.250.50.3 ~ 21.25 ~ 1.750.4 ~ 1.750.5 ~ 2.50.8 ~ 3
                                                                                        Tool Material TypePowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel
                                                                                        Tap TypePoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tap
                                                                                        Hole typeFor through holeFor through holeFor through holeFor through holeFor through holeFor blind holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through hole
                                                                                        Chamfer threads (Lcf)5P5P6P5P5P5P5P5P5P6P4P4P5P5P6P5P4P5P5P5P5P5P5P ~ 6P
                                                                                        Coating TypeOtherNon-CoatedTiNTiCNOtherOtherTiNTiNTiCNNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiNTiNNon-CoatedCrNNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated / Other
                                                                                        Coating Y/NAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableAvailableNANANANANAAvailableAvailableNAAvailableNANANANAAvailable / NA
                                                                                        Overall Length (L)(mm)34 ~ 12034 ~ 155100 ~ 20046 ~ 7580 ~ 20060 ~ 7034 ~ 175100 ~ 20010040 ~ 6234 ~ 12010034 ~ 175100 ~ 15046 ~ 8846 ~ 8844 ~ 754634 ~ 8815040 ~ 82100 ~ 15060 ~ 120

                                                                                        Loading...

                                                                                        1. 1

                                                                                        Related Categories to Point Taps