(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

OSG Point Taps(Coating Type:Non-Coated)

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 15 Day(s) or Less
  • 17 Day(s) or Less
  • 27 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Pointed Tap Series, General Purpose EX-POT

      Pointed Tap for Stainless Steel EX-SUS-POT

        LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

          Pointed Tap for Stainless Steel use EX-SUS-POT

            Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

              Pointed Tap for General Application (with OX)_EX-H-POT

                Long Shank・General Application_EX-LT-POT

                  Pointed Tap for Deep Holes EX-DH-POT

                    Pointed Tap for Difficult-To-Cut Materials CPM-POT

                      CPM Pointed Tap with Long Shank_CPM-LT-POT

                        Pointed Tap for Thin Plate EX-SS-POT

                          General Application(with OX)_EX-LT-H-POT

                            Pointed Tap Series Ultra Synchro Tap US-AL-RFT

                            Brand

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            OSG

                            Product Series

                            Pointed Tap Series, General Purpose EX-POT

                            Pointed Tap for Stainless Steel EX-SUS-POT

                            LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

                            Pointed Tap for Stainless Steel use EX-SUS-POT

                            Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

                            Pointed Tap for General Application (with OX)_EX-H-POT

                            Long Shank・General Application_EX-LT-POT

                            Pointed Tap for Deep Holes EX-DH-POT

                            Pointed Tap for Difficult-To-Cut Materials CPM-POT

                            CPM Pointed Tap with Long Shank_CPM-LT-POT

                            Pointed Tap for Thin Plate EX-SS-POT

                            General Application(with OX)_EX-LT-H-POT

                            Pointed Tap Series Ultra Synchro Tap US-AL-RFT

                            Days to Ship Same day or more 12 Day(s) or more 8 Day(s) or more 2 Day(s) or more 8 Day(s) or more 1 Day(s) or more 8 Day(s) or more 2 Day(s) or more 2 Day(s) or more 12 Day(s) or more 1 Day(s) or more 8 Day(s) or more 2 Day(s) or more
                            Specifications
                            • STOCK
                                    • STOCK
                                            • STOCK
                                                Screw size (Nominal)No.10UN ~ M36No.5UN ~ W5/16M2 ~ M6M1.4 ~ M24M3 ~ M6M1.4 ~ M42M3 ~ M20M2.5 ~ M10M1.4 ~ M14M8 ~ M12M2 ~ M12M3 ~ M20M18 ~ M24
                                                Screw TypesMeter / unified / Whitworth / Sewing Machineunified / WhitworthMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]
                                                Pitch (P), Number of Threading(mm)0.3 ~ 4418 ~ 440.4 ~ 10.3 ~ 30.5 ~ 10.3 ~ 4.50.5 ~ 20.45 ~ 1.250.3 ~ 21.25 ~ 1.750.4 ~ 1.750.5 ~ 2.51.5 ~ 3
                                                Tool Material TypeVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel
                                                Tap TypePoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tapPoint tap
                                                Hole typeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through holeFor through hole
                                                Chamfer threads (Lcf)5P4P6P4P4P5P5P4P5P5P5P5P5P
                                                Coating TypeNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated
                                                Coating Y/NNANANANANANANANANANANANANA
                                                Overall Length (L)(mm)34 ~ 15546 ~ 7040 ~ 6234 ~ 12010034 ~ 175100 ~ 15044 ~ 7534 ~ 8815040 ~ 82100 ~ 150100 ~ 120

                                                Loading...

                                                1. 1

                                                Related Categories to Point Taps