(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

OSG Chamfering / Centering Tools

Search by specifying the lower class category

25 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

V-UCS Hole Chamfering, Countersink, V Coating

OSG

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

Days to Ship: 2 Day(s) or more
Leading Drill TIN-NC-LDS

OSG

TiN coating enables higher speed and longer service life compared to NC-LDS

Days to Ship: 16 Day(s) or more
Leading Drill VP-LDS

OSG

V coating enables longer service life compared to TIN-NC-LDS

Days to Ship: 16 Day(s) or more
Leading Drill, Carbide FX Coating FX-LDS

OSG

90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

Days to Ship: 16 Day(s) or more
Leading Drill Standard NC-LDS

OSG

Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

Days to Ship: 1 Day(s) or more
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

OSG

90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

Days to Ship: 16 Day(s) or more
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series

OSG

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

Days to Ship: 12 Day(s) or more
2-flute, Corner Rounding Type FX-ECR

OSG

Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

Days to Ship: 16 Day(s) or more
2-flute Spiral Chamfering Cutter FX-SCC

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Days to Ship: 16 Day(s) or more
2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Days to Ship: 16 Day(s) or more
2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC

OSG

Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

Days to Ship: 16 Day(s) or more
2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC

OSG

Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

Days to Ship: 16 Day(s) or more
3-flute Chamfering Cutter (negative type) HSCT-N

OSG

End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute Chamfering Cutter (positive type) HSCT-P

OSG

End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

OSG

Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

OSG

Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

Days to Ship: 16 Day(s) or more
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Days to Ship: 16 Day(s) or more
V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding

OSG

Powdered HSS XPM corner rounding cutter with V-coating.

Days to Ship: 16 Day(s) or more
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

OSG

Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

Days to Ship: 16 Day(s) or more
Electrodeposition Diamond Router ED-EM

OSG

Standard in-stock item, sold by designated agencies

[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.

Days to Ship: 10 Day(s) or more
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

OSG

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

Days to Ship: 12 Day(s) or more
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Days to Ship: 16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	V-UCS Hole Chamfering, Countersink, V Coating	Leading Drill TIN-NC-LDS	Leading Drill VP-LDS	Leading Drill, Carbide FX Coating FX-LDS	Leading Drill Standard NC-LDS	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS	FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series	2-flute, Corner Rounding Type FX-ECR	2-flute Spiral Chamfering Cutter FX-SCC	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC	3-flute Chamfering Cutter (negative type) HSCT-N	3-flute Chamfering Cutter (positive type) HSCT-P	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter	V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank	Electrodeposition Diamond Router ED-EM	FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N	WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P	WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
Days to Ship	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Tool Material Type	High-speed steel	High-speed steel	Powder high-speed steel	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Tool Diameter (D)(mm)	4.3 ～ 37	3 ～ 25	3 ～ 25	16 ～ 25	3 ～ 25	16 ～ 25	1 ～ 3.8	0.5 ～ 1.5	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	-	3 ～ 10	3 ～ 25	4 ～ 12	1 ～ 3.8	-	-	-	-
Tip angle (θ)	60 ～ 120	60 ～ 120	90	90	90 ～ 130	90	60	-	90	90	90	90	90	90	90	90	-	-	90	-	90	90°	-	-	-
Application	Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Chamfering/Horizontal	-	-	-
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	-	-	-
Peripheral Blade Y/N	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	-	NA	NA	-	-	-
Coating Y/N	Available	Available	Available	Available	NA	Available	Available	Available	Available	NA	Available	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Other	TiN	TiCN	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	TiCN	-	TiAlN	-	Other	Other	Other
R Size (R)(mm)	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	-	-	-	-	0.5 ～ 4	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Tool Diameter (D)(mm)
0 to 2

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.16

0.17

0.18

0.19

0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.3, 0.6

0.35

0.4

0.45

0.45～2.1

0.45～2.7

0.5

0.5, 1

0.55

0.6

0.65

0.65～2.1

0.65～2.7

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 2

1–6

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.

2

2–10

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3

3~14

3 to 15

3.1

3.15

3.2

3.3

3.4

3.5

3.6

3.8

4

4.2

4.3

4.4

4.5

4.6

4.8

5

5.1

5.2

5.3

5.4

5.5

5.6

5.8

6

6.2

6.3

6.3,8.3,10.4,12.4,16.5,20.5

6.30/8.30/10.40/12.40/16.50/20.50

6.3/8.3/10.4/12.4/16.5/20.5

6.35

6.4

6.5

6.6

6.8

7

7.2

7.3

7.4

7.5

7.6

7.7

7.8

8

8.2

8.3

8.4

8.5

8.8

9

9.1

9.4

9.5

9.52

10

10.1

10.2

10.3

10.4

10.5

10.8

11

11.1

11.2

11.4

11.5

11.88

12

12.1

12.3

12.4

12.5

12.7

13

13.4

13.5

14

14.2

14.4

14.5

14.6

14.8

15

15.1

15.2

15.4

15.5

15.6

15.87

16

16.15

16.3

16.5

16.5,20.5,25.0,37.0

17

17.1

17.7

18

18.2

18.5

18.6

19

19.05

19.5

20

20.5

21

21.77

22

22.3

22.5

23

23.4

23.5

24

24.5

25

25.0(+0.3)

Max: 25, Min: 4.2

25.20

25.3

26

26.5

26.6

27

28

28.5

29

29.9

30

Max: 30, Min: 4

30.20

30.5

31

Max: 31, Min: 10

31.5

31.7

31.9

32

32.6

32.7

33.1

33.3

34

34.1

34.8

34.9

35

35.4

35.9

36

36.9

37

37.1

37.9

38

39

39.83

40

Max: 41, Min: 20

42

43

45

45.6

46

47

48

49

49.85～134.6

50

50.7

51

52

52.8

53

53.6

53.91

54

54.3

55

56

56.8

57.0

57.9

58.2

60

61.4

62

62.2

63

64

64.6

65

66

67.4

67.94

69.2

69.8

70

71.8

72

73.3

74

75

76

80

90

95

100
Drawing

Clear

Tip angle (θ)
0–90

5～85

5～85°

15

20

25

30

35

40

45

45°

50

55

60

60°

60 × 120

65

70

75

80

90

90°

Center Hole Angle: 90°

Cutter Tip Angle: 100°

118

120

120°

125°

130

135

145+90
Drawing

Clear

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
- Drilling
- Other
Images

Clear

work material
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

R0.5

0.5/1/1.5/2

0.5 to 4

0.5~5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1RM

1RY

R1

1, 1.5

1/2/3/4

1–3

1–5

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

1.8

1.85

1.9

1.95

2

2RM

2RY

R2

2, 3

2.05

2.1

2.15

2.2

2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.6

2.7

2.75

2.8

2.9

3

3RM

3RY

R3

3.25

3.5

R3.5

3.75

4

4RM

4RY

R4

4.25

4.5

R4.5

4.75

5

5RM

R5

5–10

5.25

5.5

5.75

6

R6

6.25

6.5

6.75

7

R7

7.25

7.5

7.75

8

R8

8.5

8.75

9

R9

9.5

10

R10

10.5

11

11.5

12

R12

12.5

R12.5

13

13.5

14

14.5

15

R15

15.5

16

R16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

XRM

XRY
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (42)
- Economy series (0)
- FUJIGEN (81)
- YAMAWA MFG (54)
- IWATA TOOL (47)
- GUHRING (28)
- NOGA JAPAN (27)
- OSG (25)
- THE CUT (20)
- EIKOSHA (19)
- BIG DAISHOWA SEIKI (15)
- ESCO (14)
- ILIX (14)
- Nine9 (9)
- ATOM (7)
- KYOWA SEIKO (7)
- OKABE (7)
- SANKO MFG (7)
- TRUSCO NAKAYAMA (7)
- TAIYO-TOOL (6)
- FUKUDA (5)
- NS TOOL (5)
- OKAZAKI SEIKO (5)
- DIJET (4)
- DIXI (4)
- ALPEN (3)
- ASAHI TOOLS (3)
- MAPAL (3)
- STAR-M (3)
- WATERMILLS (3)
- WALTER TITEX (3)
- ATI (2)
- DAIICHITOOL (2)
- RUKO (2)
- 7 LEADERS (1)
- MITSUBISHI HITACHI TOOL (1)
- Poulten&Graf (1)
- RYOCO SEIKI (1)
- SANDVIK (1)
- SKC (1)
- UNION TOOL (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Chamfering / Centering Tools

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

OSG Chamfering / Centering Tools

Search by specifying the lower class category

Configure

Specification/Dimensions

Tool Material Type

Tool Diameter (D)(mm)

Tip angle (θ)

Application

work material

Single blade, two blades

Peripheral Blade Y/N

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

OSG Chamfering / Centering Tools

Search by specifying the lower class category

Configure

Specification/Dimensions

Tool Material Type

Tool Diameter (D)(mm)

Tip angle (θ)

Application

work material

Single blade, two blades

Peripheral Blade Y/N

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB