SHINWASOKUTEI Scales for Circular Saws

• 

  Circular Saw Guide Ruler L-Angle Plus, Combination Scale

  SHINWASOKUTEI

  · Uses a slide-stop system which makes it easy to position and secure tightly.
  · Features a "Wide Hexa Grip" handle for a more secure grip. Pressing down on the handle causes the non-slip rubber portion to move down and adhere to the material, securing it tightly.
  · An upright design with a heel-shaped structure. The product will not lean on the diagonal when stood upright since the guide and handle mounting plate are of the same height.

  Days to Ship:	19 Day(s) or more

• 

  Single Action I-Clamp for Circular Saw Guide

  SHINWASOKUTEI

  A guide ruler used when cutting material with a circular saw.
  [Features]
  · Circular saw guide ruler that can be fixed to the material with a single touch.
  · Work is possible without pressing the ruler.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Justy for Circular Saw Guide

  SHINWASOKUTEI

  [Features]
  · The angle (20°-160°) can be set freely.
  · Includes a 3-8 inch gradated scale.
  · Even for wide materials that the circular saw guide cannot reach, it can be turned over and used.
  · Quick adjust: Adopts a quick adjust mechanism for smoothly securing at given angles (45°, 90°, 135°).
  · Justy II / Mini Free Angle II: An easy-to-read scale with a white background.
  · It adopts a new stopper screw made of metal resistant to breakage.
  · Flap type foldable knob

  Days to Ship:	16 Day(s) or more

• 

  Mini Free Angle for Circular Saw Guide

  SHINWASOKUTEI

  [Features]
  · Smoothly secures at given angles (45°, 90°, 135°).
  · Quick adjust mechanism.
  · Clamps can be used to fix a Mini Free Angle to uprights when using a circular saw on uprights at construction sites.
  · As it allows a heavy circular saw to be held with both hands, safe and accurate cutting is possible.
  · The circular saw guide part contains stainless steel, providing higher durability and a stable cut.
  · The angle (20°-160°) can be set freely.
  · Includes a 3-8 inch gradated scale.
  · Wide materials that the circular saw guide cannot reach

  Days to Ship:	1 Day(s) or more

• 

  Free Angle Multi for Circular Saw Guide

  SHINWASOKUTEI

  [Features]
  · Non-deflection slider comes equipped as standard.
  · Both length and angle can be adjusted freely.
  · Replace the guide to adjust the length.
  · Aluminum guide can be stopped in any position.
  · Lengthened cutting is also convenient when there is no angle.

  Days to Ship:	8 Day(s) or more

• 

  Circular Saw Guide Ruler, Justy II 23 cm

  SHINWASOKUTEI

  [Features]
  · The angle (20°-160°) can be set freely.
  · Includes a 3-8 inch gradated scale.
  · Even for wide materials that the circular saw guide cannot reach, it can be turned over and used.
  · Adopts a quick adjust mechanism for smoothly securing at given angles (45°, 90°, 135°).
  · An easy-to-read scale with a white background.
  · It adopts a new stopper screw made of metal resistant to breakage.
  · When using a circular saw to cut through pillars, Mini Free Angle can be fixed onto the pillar.
  · As it allows a heavy circular saw to be held with both hands, safe and accurate cutting is possible

  • STOCK

  Days to Ship:	8 Day(s)

• 

  Slider

  SHINWASOKUTEI

  [Features]
  · An easily readable white guide with vertical scale for good workability.
  · Equipped with groove for slider. Use a slider (sold separately) to fit an electric circular saw into the guide groove, ensuring cutting without wobbling.
  · 1.2 m lineup of 4 x 8' plywood that can be cut to up to 4'.
  · With scribing guide capable of scribing 303 mm and 455 mm. (455 mm is available in 1 m and 1.2 m only)
  · Both ends of the rod are covered with protective caps, to guard the materials from being scratched.
  · The guide surface has an embedded thin stainless steel sheet which does not come away easily.
  · The stopper function on the back surface is reinforced.
  · Includes a handle in a position which ensures stability when lifting.

  Days to Ship:	12 Day(s) or more

• 

  L Angle Fit

  SHINWASOKUTEI

  [Features]
  · With a stopper height of 9 mm, it effectively abuts floor materials and chamfered materials such as two-by-fours, etc.
  · The stopper is long and can be fixed firmly without regard for the motor of the electric circular saw.
  · The 15 cm and 23 cm lengths are ideal for cutting two-by-fours, rough timber, non-load-bearing beams, etc. The 30 cm length is ideal for cutting floor material, etc.
  · The underside of the guide is fitted with rubber, which prevents slipping and helps suppress damage to materials. (78034/78052)
  · Includes a 5 mm pitch scale.

  Days to Ship:	1 Day(s)

• 

  Triangle

  SHINWASOKUTEI

  [Features]
  · There are stoppers on the front and back, allowing it to be used at right angle and 45°.
  · There is rubber on the underside of the holding position, so stable cuts can be made at a 45° right angle.
  · Light and sturdy because it is made of polycarbonate resin. The weight is 44% that of aluminum and the strength is about 30 times that of acrylic.
  Made of resin, it does not scratch the workpiece. (78280)
  · Provides stable cutting out with a long insertion part.
  · With a stopper height of 9 mm, it effectively abuts floor materials and chamfered materials such as two-by-fours, etc.
  · With stainless steel thin plate to prevent wear.

  Days to Ship:	16 Day(s) or more

• 

  T-Slide II

  SHINWASOKUTEI

  [Features]
  · Uses a deflection prevention fitting which will not fall out.
  · Locks the object tightly with a quick shift lock mechanism for easy tightening.
  · The height of the stopper is equivalent to 3 pieces of 9 mm thickness.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  T-Slide Double

  SHINWASOKUTEI

  [Features]
  · Two-piece integrated joint
  · Uses a deflection prevention fitting which will not fall out.
  · Locks the object tightly with a quick shift lock mechanism for easy tightening.
  · The height of the stopper is equivalent to 3 pieces of 9 mm thickness.

  Days to Ship:	1 Day(s)

• 

  T-Slide Basic

  SHINWASOKUTEI

  [Features]
  · The rod comes out from the stopper part, so even thin boards of less than 5 mm do not get between the stopper part and rod, and the stopper seats firmly.
  · Made entirely from stainless steel (SUS304), making it both rust resistant and hard to bend (pole).
  · 3D structure molded from a single plate of stainless steel. Achieves sturdiness and lighter weight.
  · With holes for mounting woodwork. By mounting wood materials with wood screws, it can support narrow width cutting.

  Days to Ship:	8 Day(s) or more

• 

  Free Angle Neo

  SHINWASOKUTEI

  [Features]
  · The common issue of plastic screws breaking is resolved by adopting sturdy metal screws.
  · Screw is foldable and stays out of the way.
  · Knobs and rethreadable screws.
  · 3D stopper unlikely to distort.
  · Adopts a lightweight, strong, hollow aluminum structure with a wide guide.
  · With groove for non-deflection slider (sold separately, part no. 78236). Just slide along the grooves to prevent misalignment when cutting.

  • STOCK

  Days to Ship:	1 Day(s)

Loading...