(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

YAMAWA MFG Screw-Hole-Related Tools(Tool Material Type:Powder high-speed steel)

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    AXE Hand Taps_AXE-HT

      Roll Taps for Dry Tapping, Coated_OL+RZ

        SU Roll Taps_SURZ

          Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

            Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

              Spiral Fluted Taps for Titanium Alloys_ZET-B

                Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

                  Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

                    High Performance Roll Taps, Coated_HP+RZ

                      SU Roll Tap for SURZ Unify Screw Thread

                        SU Roll Tap for SURZ Metric Screw Thread

                        Brand

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        YAMAWA MFG

                        Product Series

                        AXE Hand Taps_AXE-HT

                        Roll Taps for Dry Tapping, Coated_OL+RZ

                        SU Roll Taps_SURZ

                        Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                        Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

                        Spiral Fluted Taps for Titanium Alloys_ZET-B

                        Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

                        Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

                        High Performance Roll Taps, Coated_HP+RZ

                        SU Roll Tap for SURZ Unify Screw Thread

                        SU Roll Tap for SURZ Metric Screw Thread

                        Days to Ship 20 Day(s) 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) 8 Day(s) or more
                        Screw size (Nominal)M6 ~ M12No.10 ~ M6No.2 ~ M3M1 ~ M6M3 ~ M20M3 ~ M20M3 ~ M20M3 ~ M20No.10-32UNF ~ M20No.2 ~ No.6M1 ~ M3
                        Screw TypesMeterMeter / unifiedMeter / unifiedMeterMeterMeterMeterMeterMeter / unifiedMeterMeter
                        work materialCast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
                        Pitch (P), Number of Threading(mm)1 ~ 1.750.25 ~ 640.2 ~ 560.2 ~ 10.5 ~ 2.50.5 ~ 2.50.5 ~ 2.50.5 ~ 2.50.25 ~ 1.750.45 ~ 0.790.2 ~ 0.5
                        Tool Material TypePowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steel
                        Tap TypeHand TapRoll tapRoll tapRoll tapSpiral TapSpiral TapPoint tapSpiral TapRoll tapRoll tapRoll tap
                        Hole typeFor through hole / For blind holeFor through holeFor blind holeFor blind holeFor through holeFor blind holeFor through holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole
                        Chamfer threads (Lcf)1.5P4P2P1P5P3P4.5P3P2P ~ 4P2P2P
                        Coating TypeTiNTiCNOtherTiCN----TiCNTiCNTiCN
                        Coating Y/NAvailableAvailableAvailableAvailableNANANANAAvailableAvailableAvailable
                        Overall Length (L)(mm)62 ~ 8236 ~ 6236 ~ 5236 ~ 6246 ~ 10546 ~ 10546 ~ 10546 ~ 10536 ~ 10542 ~ 5236 ~ 46

                        Loading...

                        1. 1

                        Related Categories to Screw-Hole-Related Tools