(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts(Shaft End Perpendicularity:Perpendicularity (0.2))

Basic Shape

  • Solid
  • One End Stepped
  • Both Ends Stepped
  • Hollow
  • Hollow, One End Stepped
  • Hollow, Both Ends Stepped
Brand
Product Series
CAD
Days to Ship
Basic Shape
End Shape (Left)
End Shape (Right)
Clamping Tool Type
Shaft End Perpendicularity
Material
Heat Treatment
Surface Treatment
Shaft Dia. D(Ø)
Shaft Fits

    Linear Shafts-Straight Type

      Linear Shafts-Both Ends Tapped

        Linear Shafts - Shaft Ends Configurable

          Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

            (Economy series) Guide shaft Straight Type

              Linear Shafts-One End Tapped

                Linear Shafts-Both Ends Threaded

                  (Economy series) Guide Shafts Both Ends Tapped with Wrench Slot

                    Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

                      Linear Shafts-One End Stepped, Both Ends Female Thread-

                        Linear Shafts-One Ends Threaded

                          Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

                            (Economy series) Guide Shafts One End Tapped

                              Linear Shafts-Both Ends Stepped and Female Thread-

                                (Economy series) Guide Shafts Both Ends Tapped

                                  Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

                                    Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                                      Linear Shafts-One End Threaded One End Tapped

                                        Linear Shafts -Straight Type-

                                          Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

                                            Linear Shafts - With Retaining Ring Grooves -

                                              Precision Linear Shafts - Fully Plated Straight Type

                                                Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                                                  Linear Shafts One End Threaded with Undercut

                                                    Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                                      Linear Shafts-One End Stepped and Female Thread with Wrench Flats-

                                                        Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                                                          Linear Shafts-One End Threaded

                                                            Linear Shafts - Continuous Support - Pre-Drilled and Tapped

                                                              Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

                                                                Linear Shafts - Set Screw Grooved

                                                                  (Economy series) Guide Shafts One End Tapped with Wrench Slot

                                                                    Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                      Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                        Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats-

                                                                          Linear Shafts-One End Stepped and Female Thread-

                                                                            Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                                                              Linear Shafts - One End Two Tapped Holes - Solid Type / One End Tapped Type / One End Stepped and Tapped Type / Threaded Type

                                                                                Linear Shafts - Keyway

                                                                                  Precision Linear Shafts - Both Ends Male Thread with Undercut

                                                                                    Linear Shafts - Hex Socket -Tapped Type / Threaded Type / Stepped and Tapped Type

                                                                                      Shafts - Tapped Pilot Type

                                                                                        Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                                                          Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

                                                                                            Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                                                            Brand

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi Economy

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi Economy

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi Economy

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi Economy

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi Economy

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            Product Series

                                                                                            Linear Shafts-Straight Type

                                                                                            Linear Shafts-Both Ends Tapped

                                                                                            Linear Shafts - Shaft Ends Configurable

                                                                                            Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

                                                                                            (Economy series) Guide shaft Straight Type

                                                                                            Linear Shafts-One End Tapped

                                                                                            Linear Shafts-Both Ends Threaded

                                                                                            (Economy series) Guide Shafts Both Ends Tapped with Wrench Slot

                                                                                            Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

                                                                                            Linear Shafts-One End Stepped, Both Ends Female Thread-

                                                                                            Linear Shafts-One Ends Threaded

                                                                                            Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

                                                                                            (Economy series) Guide Shafts One End Tapped

                                                                                            Linear Shafts-Both Ends Stepped and Female Thread-

                                                                                            (Economy series) Guide Shafts Both Ends Tapped

                                                                                            Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

                                                                                            Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                                                                                            Linear Shafts-One End Threaded One End Tapped

                                                                                            Linear Shafts -Straight Type-

                                                                                            Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

                                                                                            Linear Shafts - With Retaining Ring Grooves -

                                                                                            Precision Linear Shafts - Fully Plated Straight Type

                                                                                            Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                                                                                            Linear Shafts One End Threaded with Undercut

                                                                                            Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                                                                            Linear Shafts-One End Stepped and Female Thread with Wrench Flats-

                                                                                            Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                                                                                            Linear Shafts-One End Threaded

                                                                                            Linear Shafts - Continuous Support - Pre-Drilled and Tapped

                                                                                            Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

                                                                                            Linear Shafts - Set Screw Grooved

                                                                                            (Economy series) Guide Shafts One End Tapped with Wrench Slot

                                                                                            Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                            Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                            Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats-

                                                                                            Linear Shafts-One End Stepped and Female Thread-

                                                                                            Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                                                                            Linear Shafts - One End Two Tapped Holes - Solid Type / One End Tapped Type / One End Stepped and Tapped Type / Threaded Type

                                                                                            Linear Shafts - Keyway

                                                                                            Precision Linear Shafts - Both Ends Male Thread with Undercut

                                                                                            Linear Shafts - Hex Socket -Tapped Type / Threaded Type / Stepped and Tapped Type

                                                                                            Shafts - Tapped Pilot Type

                                                                                            Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                                                            Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

                                                                                            Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                                                            CAD
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            Days to Ship 3 Day(s) or more 3 Day(s) or more 12 Day(s) or more 3 Day(s) or more 10 Day(s) 3 Day(s) or more 3 Day(s) or more 10 Day(s) 3 Day(s) or more 4 Day(s) or more 4 Day(s) or more 3 Day(s) or more 10 Day(s) 4 Day(s) or more 10 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 13 Day(s) 4 Day(s) or more 4 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 4 Day(s) or more 10 Day(s) or more 10 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 10 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more
                                                                                            Basic ShapeSolidSolidSolid / One End Stepped / Both Ends SteppedSolidSolidSolidSolidSolidSolidOne End SteppedSolidSolidSolidBoth Ends SteppedSolidSolidOne End Stepped / Both Ends SteppedSolidSolidSolidSolidSolidOne End SteppedSolid / One End SteppedSolidOne End SteppedSolidSolidSolidOne End SteppedSolidSolidSolidSolidBoth Ends SteppedOne End SteppedSolid / One End SteppedSolidSolidSolidSolidSolidSolidSolidOne End Stepped
                                                                                            End Shape (Left)No MachiningTappedNo Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped / Hex Socket / TaperedTappedNo MachiningTappedThreadedTappedThreadedNo Machining / TappedThreadedTappedTappedNo Machining / TappedTappedThreadedThreadedThreadedNo MachiningThreadedWith Retaining Ring GroovesNo Machining / Tapped / ThreadedTappedThreadedTappedTappedThreadedThreadedNo MachiningNo Machining / TappedNo Machining / Tapped / Threaded / Set Screw GroovedTappedThreadedThreadedTappedNo Machining / TappedTaperedNo Machining / Tapped / ThreadedKeywayThreadedTapped / ThreadedTapped / ThreadedThreadedThreadedThreaded
                                                                                            End Shape (Right)No MachiningTappedNo Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped Hole / Hex Socket / TaperedTappedNo MachiningNo MachiningThreadedTappedTappedTappedTappedNo MachiningNo MachiningNo Machining / TappedTappedThreadedNo Machining / ThreadedTappedNo MachiningNo MachiningWith Retaining Ring GroovesNo Machining / Tapped / Threaded / TaperedTappedNo MachiningNo Machining / TappedNo MachiningNo MachiningNo MachiningNo MachiningThreadedSet Screw GroovedNo MachiningNo MachiningThreadedTappedNo MachiningTapped / ThreadedTapped HoleNo MachiningThreadedHex SocketTapped PilotTappedThreadedTapped
                                                                                            Clamping Tool Type---------------------------------------------
                                                                                            Shaft End PerpendicularityPerpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)
                                                                                            MaterialStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ Steel
                                                                                            Heat TreatmentNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction Hardened
                                                                                            Surface TreatmentNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot ProvidedNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingElectroless Nickel PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating
                                                                                            Shaft Dia. D(Ø)3 ~ 504 ~ 506 ~ 506 ~ 503 ~ 504 ~ 504 ~ 506 ~ 508 ~ 508 ~ 506 ~ 506 ~ 505 ~ 508 ~ 505 ~ 506 ~ 508 ~ 504 ~ 5088 ~ 503 ~ 308 ~ 508 ~ 508 ~ 506 ~ 208 ~ 506 ~ 504 ~ 5010 ~ 508 ~ 506 ~ 306 ~ 503 ~ 303 ~ 308 ~ 508 ~ 506 ~ 2015 ~ 506 ~ 508 ~ 506 ~ 2012 ~ 308 ~ 508 ~ 508 ~ 50
                                                                                            Shaft Fitsh5 ~ f8h5 ~ f8h5 ~ g6h5 ~ f8g7h5 ~ f8h5 ~ f8g7h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8g7h5 ~ f8g7h5 ~ f8h5 ~ f8h5 ~ f8h8h5 ~ f8h5 ~ f8g6h5 ~ f8h5 ~ f8g6h5 ~ f8h5 ~ f8h5 ~ f8g6h5 ~ f8g6g7h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ g6g6h5 ~ f8h5 ~ f8g6g6h5 ~ f8h5 ~ f8h5 ~ f8

                                                                                            Loading...

                                                                                            Related Categories to Linear Shafts