(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Oil Free Bushings（Metal Type：Brass）
Type
-
Straight/sleeve -
Flanged Type -
Standard/Pilot/Center-Flanged Type -
Housing Unit Type
-
- Recommendation
Oil Free Bushings Copper Alloy Shouldered I.D.E7/O.D.r6
MISUMI
- Oil Free Bushings Copper Alloy Shouldered I.D.E7/O.D.r6, C-MUFZ / C-MUFZU series from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- Inner diameter precision class 7 ensures more accurate locating precision.
- Smooth surface makes linear motion smoother.
- Composite products based on high-strength brass and inlaid with solid lubricant.
- It is most suitable for use under conditions of heavy load and low speed operation.
- Excellent wear resistance can be exerted at parts with reciprocating motion, frequent starting and stopping, etc., where oil film is difficult to form.- Volume Discount
Days to Ship: Same day or more -
- Recommendation
Oil Free Bushings Copper Alloy Straight I.D.F7/O.D.m6
MISUMI
- Oil Free Bushings Copper Alloy Straight I.D.F7/O.D.m6, C-MUBZ / C-MUBZU series from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- Inner diameter precision class 7 ensures more accurate locating precision.
- Smooth surface makes linear motion smoother.
- Composite products based on high-strength brass and inlaid with solid lubricant.
- It is most suitable for use under conditions of heavy load and low speed operation.
- Excellent wear resistance can be exerted at parts with reciprocating motion, frequent starting and stopping, etc., where oil film is difficult to form.- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Oil Free Bushings - Copper Alloy Straight, Standard
MISUMI
- Oil Free Bushings - Copper Alloy Straight, Standard type, MPBZ series from MISUMI.
- Copper Alloy Bushings in general use. Straight Shape Type.
- Recommended mating shaft for I.D. of Copper oil-free bushing MPBZ series are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- Use of rotation stopper screws is recommended to affix bushings.
- The Copper oil-free bushing MPBZ series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Special Price Days to Ship: Same day or more -
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Oil Free Bushing Housing Units - Standard Flanged.
- Housing Type: Single / Double
- Outer Diameter: 12, 15, 19, 21, 23, 28, 32, 40, 45, 52, 60 and 80.
- Housing Material: SS400.
- Housing Surface Treatment: Electroless Nickel Plating
- Bushing Material: High Tensile Brass Alloy Solid Lubricant Embedded
- Seal type: No Seal, With Dust Seals and With Non-Contact Seals
- Seals: NBR Nitrile Rubber (O-Ring) and Teflon Resin
- Suitable for vertical use and reduces the time of manufacturing and assembling the housing.- Volume Discount
Special Price Days to Ship: Same day or more -
Oil Free Bushings Copper Alloy Flanged I.D.F7/O.D.h7
MISUMI
- Oil Free Bushings Copper Alloy Flanged I.D.F7/O.D.h7, C-MUTNZ / C-MUTSZ / C-MUTZ series from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- Inner diameter precision class 7 ensures more accurate locating precision.
- Smooth surface makes linear motion smoother.
- Recommended mating shaft for I.D. of Copper oil-free bushing are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing C-MUTNZ / C-MUTSZ / C-MUTZ series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Oil Free Bushings - Products - Copper Alloy Straight, Standard
MISUMI
Consider adopting C-VALUE products for Medium Accuracy / Medium/Low Load / Medium/Low Frequency applications. The most popular Oil-Free Bushing Shape.
- Volume Discount
Special Price Days to Ship: Same day -
- On Sale Till 31/03/2025
Oil Free Bushings - Flanged, Standard
MISUMI
- Oil Free Bushings - Flanged, Standard type, MPFZ series from MISUMI.
- Flanged shape, less likely to pull-out.
- Recommended mating shaft for I.D. of Copper oil-free bushing MPFZ series are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- Use of rotation stopper screws is recommended to affix bushings.
- The Copper oil-free bushing MPFZ series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Flange Integrated Oil Free Bushings - Copper Alloy, Standard Flanged, I.D. F7
MISUMI
- Oil Free Bushings - Copper Alloy Standard Flanged.
- The series including of MPTZ, MPTSZ and MPTNZ.
- Oil Free Bushings Material: High Tensile Brass Alloy (Solid Lubricant Embedded)
- Inner Diameter: 6, 8, 10, 12, 13, 16, 20, 25, 30, 35, 40 and 50.
- Overall Length (L): 15, 20, 25, 30, 35, 40, 50, 50, 60, 70, 80 and 100 mm.
- Thickness: 4, 5, 6, 8 and 10.
- Operating Temperature Range: -40 to 150 (°C)
- Accessory: Hex Socket Low Head Cap Screws.
- Flange Integrated Oil Free Bushings can reduce the time of assembling.- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Oil Free Bushing Housing Units - Pilot Flanged
- Housing Type: Single, Double and Long.
- Outer Diameter: 6, 8, 10, 12, 16, 20, 25, 30, 35, 40 and 50.
- Housing Material: SS400.
- Housing Surface Treatment: Electroless Nickel Plating
- Bushing Material: High Tensile Brass Alloy Solid Lubricant Embedded
- Seal type: No Seal and With Non-Contact Seals
- Operating Temperature Range: -40 to 150 (°C)
- For Non-Contact Seals Teflon seal of 0.3mm thick is attached on the inner side of each retaining ring.
- Suitable for vertical use. Reduces the time of manufacturing and assembling the housing.- Volume Discount
Special Price Days to Ship: Same day or more -
Days to Ship: Same day or more -
Oil Free Bushings - QStandard / Thin Wall, I.D. E7 O.D. r6
MISUMI
- Oil Free Bushings Copper Alloy Straight, Standard / Thin Wall.
- The series including of MPBR and MPBRU.
- Oil Free Bushings Material: High Tensile Brass Alloy (Solid Lubricant Embedded)
- Inner Diameter: 5, 6, 8, 10, 12, 15, 16, 20, 25 and 30.
- Overall Length (L): 8, 10, 12, 15, 16, 20,25, 30, 40 and 50 mm.
- Thickness: 2, 3 and 4.
- Operating Temperature Range: -40 to 150 (°C)
- Bushings can be affixed only by Press-fit process.
- No process using Rotation Stopper Screws is required.- Volume Discount
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Oil Free Bushings - Copper Alloy Straight / Thin Wall, I.D. F7 O.D. m6
MISUMI
- Oil Free Bushings - Copper Alloy Straight / Thin Wall type, I.D. F7 O.D. m6, MPBZU series from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing MPBZU series are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- Use of rotation stopper screws is recommended to affix bushings.
- The Copper oil-free bushing MPBZU series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
#500SP1-SL1 Flanged Bushing (SPF)
OILES
Flange bushing #500SP (SPF) that can be used in a lubrication-free manner and exhibits excellent abrasion-resistance.
[Features]
· A lubrication-free bearing for high-loads that uses a solid embedded lubricant for lubrication based on the high-strength brass alloy created using advanced casting technology.
· Can be used without lubrication. Demonstrates high performance in high-load, low-speed applications.
· Demonstrates excellent abrasion-resistance in applications where oil film configuration is difficult, such as frequent start and stop operations like reciprocating motions and oscillating motions.
· Excellent chemical and corrosion-resistance.- CAD ：
- 2D
Special Price Days to Ship: Same day or more -
Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Oil Free Bushings with oil Groove
MISUMI
- Oil Free Bushings with oil Groove
- The series including of MPBAZ.
- Groove type: One Groove and Two Groove
- Oil Free Bushings Material: High Tensile Brass Alloy.
- Inner Diameter: 10, 12, 13, 15, 16, 20, 25 and 30.
- Overall Length (L): 10, 12, 15, 16, 20, 25, 30 and 40 mm.
- Thickness: 2, 3 and 4.
- Operating Temperature Range: -40 to 150 (°C)
- Rotation Stopper Screw: M4x8 and M5x8.
- Lubrication frequency can be reduced by gathering initial grease in oil groove.- Volume Discount
Special Price Days to Ship: Same day or more -
Oil Free Bushings - Copper Alloy, Flanged, Thin Wall
MISUMI
- Oil Free Bushings - Copper Alloy, Flanged, Thin Wall type, MPFZU series from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing MPFZU series are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- Use of rotation stopper screws is recommended to affix bushings.
- The Copper oil-free bushing MPFZU series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Days to Ship: 16 Day(s) or more -
Flange Integrated Oil Free Bushings - Copper Alloy, Pilot Flanged
MISUMI
- Flange Integrated Oil Free Bushings - Copper Alloy, Pilot Flanged type, MPIZ / MPITZ series from MISUMI.
- Flange integrated oil free bushings can reduce the time of assembling.
- Recommended mating shaft for I.D. of Copper oil-free bushing MPIZ / MPITZ series are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing MPIZ / MPITZ series is made of High tensile brass alloy with solid lubricant embedded.- Volume Discount
Days to Ship: 16 Day(s) or more -
Oil Free Bushings - Center Flanged Housing Units (Built-In Copper Alloy Bushings
MISUMI
- Oil Free Bushings - Center Flanged Housing Units
- Flanged Housing Type: Round Flange, Square Flange and Compact Flange.
- Outer Diameter: 6, 8, 10, 12, 13, 16, 20, 25 and 30.
- Housing Material: SS400.
- Housing Surface Treatment: Electroless Nickel Plating
- Bushing Material: High Tensile Brass Alloy Solid Lubricant Embedded
- Seal type: No Seal and With Non-Contact Seals
- With Non-Contact Seals Teflon seal of 0.3mm thick is attached on the inner side of each retaining ring.
- Suitable for vertical use and reduces the time of manufacturing and assembling the housing.- Volume Discount
Days to Ship: 10 Day(s) -
MISUMI
More precise linear and rotary motion compared to Standard Type can be achieved by keeping the clearance between oil-free bushings and g6 shafts small.
- Volume Discount
Days to Ship: Same day or more -
Oil Free Bushings - Products - Copper Alloy, Flanged, Standard
MISUMI
"Consider adopting C-VALUE products for Medium Accuracy / Medium/Low Load / Medium/Low Frequency applications. Flanged, less likely to pull-out."
- Volume Discount
Days to Ship: 16 Day(s) or more -
Oil Free Bushings Flange Integrated Type Copper Alloy Center Flanged Type
MISUMI
- Oil Free Bushings Flange Integrated Type Copper Alloy Center Flanged Type, E-MUCTZ / E-MUCZ from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing E-MUCTZ / E-MUCZ series is made of High tensile brass alloy with solid lubricant embedded.
- It is recommended to fix the bushing with anti-rotation screw.
- Accessories: Low head hexagon socket head screws 2 to 4 pcs.- Volume Discount
Days to Ship: 10 Day(s) -
- On Sale Till 31/03/2025
OILES
Lubrication-free bearing for high loads with embedded solid lubricant.
[Features]
· A high power brass system alloy-based product made using high casting technology.
· Various solid lubricants can be incorporated depending on the operating conditions.
· Can be used underwater.
· Can be used without lubrication.
· Demonstrates high performance at high load and low speed positions.
· Outstanding abrasion-resistance and low wear.- CAD ：
- 2D
Special Price Days to Ship: Same day or more -
#500SP1 SL1 Guide Bushing (SGB)
OILES
High strength brass alloy guide bushing. Can be used for reciprocating motion. Tightening with hexagon socket set screws, etc., is recommended for use.
- CAD ：
- 2D
Days to Ship: 11 Day(s) or more -
DAISLIDE Flanged Bushing SAF Series
DAIDO METAL
Oilless bearing for high load (flanged bushing type).
[Features]
· Copper based oilless bearing for heavy load applications into which solid lubricant plugs are embedded.
· Choose base metal and plug according to the application and working conditions.
· Maintenance-free, no need to supply oil.
· Excellent wear resistance properties.
· Excellent wear resistance properties are exhibited in applications where oil film formation is difficult such as reciprocating, intermittent, and oscillating motions under conditions of high load and low speed.
· Low friction coefficient.
· Can be used under a wide range of temperatures from low to high.
· Free design of shape and size is possible.
· Superior corrosion and chemical resistance.
· Can be used in river or in sea water, in special liquids where chemical resistance of the metal base and solid lubricant is needed, and in gas where oil supply is difficult.
· Superior impact resistance.Days to Ship: Same day or more -
![Lubrication-Free Bushing Copper Alloy Straight Type [JDB-105]](//id.misumi-ec.com/linked/material/mech/ZOB1/PHOTO/JDB.jpg?$product_view_b$)
Lubrication-Free Bushing Copper Alloy Straight Type [JDB-105]
ZOB
A copper alloy oil free bushing designed with cost in mind.
Days to Ship: 16 Day(s) or more -
Lubrication-Free Bushing Block Type Housing Unit, Tall / Compact Type
MISUMI
This is a standard that reduces the effort of manufacturing and assembling a housing suitable for horizontal movement with a built-in oil-free bushing made of high-strength brass alloy. The housing is more compact than the block type housing unit standard type.
- Volume Discount
Days to Ship: Same day -
Oil Free Bushings Copper Alloy Thrust Type
MISUMI
- Oil Free Bushings Copper Alloy Thrust Type, E-MUGZ / E-MUKZ series from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing E-MUGZ / E-MUKZ series is made of High tensile brass alloy with solid lubricant embedded.
- It is recommended to fix the bushing with anti-rotation screw.
- Accessories: Low head hexagon socket head screws 2 to 4 pcs.- Volume Discount
Days to Ship: Same day or more -
Days to Ship: 10 Day(s) -
Copper Alloy Shoulder Type Lubrication-Free Bushing
ZOB
A copper alloy flanged type oil free bushing designed with cost in mind.
Days to Ship: 16 Day(s) or more -
Oil Free Bushing Housing Units - Blocks - Compact - Tall Blocks / Wide Blocks
MISUMI
- Oil Free Bushing Housing Units -Wide Blocks Compact Type
- Wide Blocks Compact Type: Single and Double.
- Outer Diameter: 10, 12, 16, 20, 25 and 30.
- Housing Material: Aluminum Alloy.
- Housing Surface Treatment: Clear Anodize.
- Bushing Material: High Tensile Brass Alloy Solid Lubricant Embedded
- Seal type: No Seal and With Non-Contact Seals
- Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing.
- For Non-Contact Seals Teflon seal of 0.3mm thick is attached on the inner side of each retaining ring.- Volume Discount
Days to Ship: Same day or more -
Oil Free Bushings Flange Integrated Type/Embedded Flanged Type
MISUMI
- Oil Free Bushings Flange Integrated Type/Embedded Flanged Type, E-MUITZ / E-MUIZ from MISUMI.
- Recommended mating shaft for I.D. of Copper oil-free bushing are d8: General use (High Load), e7: General use (Light Load), f8: High precision use, g6: High precision use (Intermittent operation).
- The Copper oil-free bushing E-MUITZ / E-MUIZ series is made of High tensile brass alloy with solid lubricant embedded.
- It is recommended to fix the bushing with anti-rotation screw.
- Accessories: Low head hexagon socket head screws 2 to 4 pcs.- Volume Discount
Days to Ship: Same day or more -
Days to Ship: 10 Day(s) -
- On Sale Till 31/03/2025
#500SP1-SL1 Thrust Bushing (SPFG)
OILES
Demonstrates high performance at high load and low speed movement positions.
[Features]
· Suitable for rotation, swing and reciprocating motions.
· One bushing can bear radial journal load and thrust load at the same time.
· Machinery accuracy can be improved by increasing the flange thickness accuracy- CAD ：
- 2D
Special Price Days to Ship: Same day or more -
#500SP1 SL1 Flange Guide Bushing (SGF)
OILES
Suitable for rotation, swing and reciprocating motions. Tightening with hexagon socket set screws, etc., is recommended for use.
- CAD ：
- 2D
Days to Ship: 17 Day(s) or more
![Lubrication-Free Bushing Copper Alloy Straight Type [JDB-105]](http://id.misumi-ec.com/linked/material/mech/ZOB1/PHOTO/JDB.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Inner Dia. d(Ø) |
| Outer Dia. D(Ø) |
| Overall Length L(mm) |
| Metal Type |
| Environment |
| Resin Type |
| Multi-layer |
| Case Shape |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Lubrication |
| Thickness t(mm) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Case Material |
| Max. Allowable Velocity V(m/s) |
| Length Type |
| Max. Allowable PV Value Range(N/mm2•m/s) |
| Max. Allowable PV Value(N/mm2•m/s) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | OILES | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OILES | DAIDO METAL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OILES | OILES | DAIDO METAL | ZOB | MISUMI | MISUMI | MISUMI | ZOB | MISUMI | MISUMI | MISUMI | OILES | OILES |
| Product Series | Oil Free Bushings - Products - Copper Alloy Straight, Standard | Flange Integrated Oil Free Bushings - Copper Alloy, Standard Flanged, I.D. F7 | Oil Free Bushings - Copper Alloy Straight / Thin Wall, I.D. F7 O.D. m6 | Flange Integrated Oil Free Bushings - Copper Alloy, Pilot Flanged | Oil Free Bushings - Center Flanged Housing Units (Built-In Copper Alloy Bushings | Oil Free Bushings - Products - Copper Alloy, Flanged, Standard | Oil Free Bushings Flange Integrated Type Copper Alloy Center Flanged Type | Lubrication-Free Bushing Copper Alloy Straight Type [JDB-105] | Lubrication-Free Bushing Block Type Housing Unit, Tall / Compact Type | Oil Free Bushing Housing Units - Blocks - Compact - Tall Blocks / Wide Blocks | Oil Free Bushings Flange Integrated Type/Embedded Flanged Type | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) | Same day or more | 16 Day(s) or more | 10 Day(s) | Same day or more | 11 Day(s) or more | Same day or more | 16 Day(s) or more | Same day | Same day or more | 10 Day(s) | 16 Day(s) or more | Same day or more | Same day or more | 10 Day(s) | Same day or more | 17 Day(s) or more |
| Type | Flanged Type | Straight/sleeve | Straight/sleeve | Straight/sleeve | Straight/sleeve | Standard/Pilot/Center-Flanged Type | Standard/Pilot/Center-Flanged Type | Straight/sleeve | Flanged Type | Standard/Pilot/Center-Flanged Type | Standard/Pilot/Center-Flanged Type | Flanged Type | Straight/sleeve | Straight/sleeve | Flanged Type | Straight/sleeve | Straight/sleeve | Flanged Type | Standard/Pilot/Center-Flanged Type | Standard/Pilot/Center-Flanged Type | Straight/sleeve | Flanged Type | Standard/Pilot/Center-Flanged Type | Straight/sleeve | Straight/sleeve | Flanged Type | Straight/sleeve | Housing Unit Type | Flanged Type | Standard/Pilot/Center-Flanged Type | Flanged Type | Housing Unit Type | Standard/Pilot/Center-Flanged Type | Standard/Pilot/Center-Flanged Type | Flanged Type | Flanged Type |
| Inner Dia. d(Ø) | 5 ～ 100 | 5 ～ 100 | 5 ～ 50 | 6 ～ 170 | 5 ～ 30 | 6 ～ 50 | 6 ～ 50 | 8 | 8 ～ 40 | 8 ～ 50 | 10 ～ 40 | 5 ～ 30 | 8 ～ 15 | 10 ～ 20 | 6 ～ 120 | 6 ～ 160 | 10 ～ 30 | 16 | 12 | 10 ～ 30 | 6 ～ 30 | 16 | 8 ～ 40 | 12 ～ 160 | 40 ～ 60 | 6 ～ 120 | 5 ～ 100 | 30 | 6 ～ 50 | 6 ～ 30 | 5 ～ 50 | 12 ～ 20 | 10 ～ 40 | 6 ～ 30 | 6 ～ 80 | 40 |
| Outer Dia. D(Ø) | 7 ～ 120 | 7 ～ 120 | 9 ～ 62 | 10 ～ 190 | 9 ～ 38 | 12 ～ 80 | 10 ～ 62 | 12 | 12 ～ 50 | 12 ～ 62 | 19 ～ 60 | 9 ～ 40 | 12 ～ 21 | 12 ～ 24 | 10 ～ 140 | 10 ～ 180 | 14 ～ 38 | 20 | 18 | 19 ～ 45 | 10 ～ 38 | 22 | 12 ～ 50 | 18 ～ 180 | 60 ～ 80 | 10 ～ 140 | 9 ～ 120 | - | 10 ～ 62 | 10 ～ 38 | 9 ～ 60 | - | 14 ～ 50 | 10 ～ 38 | 10 ～ 96 | 55 |
| Overall Length L(mm) | 8 ～ 100 | 6 ～ 100 | 8 ～ 60 | 8 ～ 150 | 8 ～ 60 | 45 ～ 188 | 10 ～ 100 | 10 | 10 ～ 50 | 20 ～ 70 | 32 ～ 188 | 10 ～ 50 | 12 ～ 20 | 15 ～ 25 | 10 ～ 100 | 8 ～ 150 | 10 ～ 40 | 25 | 25 | 57 ～ 128 | 10 ～ 40 | 20 | 20 ～ 80 | 20 ～ 150 | 60 ～ 90 | 10 ～ 80 | 8 ～ 100 | 128 | 10 ～ 60 | 15 ～ 70 | 10 ～ 60 | 34 ～ 48 | 25 ～ 60 | 15 ～ 70 | 11 ～ 90 | 70 |
| Metal Type | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass |
| Environment | Standard / In Oil | Standard / In Oil | - | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Oil | - | Standard / In Oil | - | - | - | - | Standard / In Oil | - | - | Standard / Heat Resistant / Foreign Object Resistant | Standard / Heat Resistant / Foreign Object Resistant | - | - | - | - | - | - | Standard / In Oil | Standard / Foreign Object Resistant / In Water / In Seawater | Standard / In Chemical | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Oil | - | Standard / In Oil | Standard / In Oil | Standard / In Oil | - | Standard / In Oil | Standard / In Oil | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Chemical |
| Resin Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Multi-layer | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Case Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Shaft Fits | d8 / e7 / g6 / f8 | d8 / e7 / g6 / f8 | - | e7 | g6 / f8 | - | d8 / e7 / g6 / f8 | - | - | - | - | g6 / f8 | - | - | e7 | - | - | - | - | - | - | - | d8 / e7 / g6 / f8 | d8 | js6 | - | d8 / e7 / g6 / f8 | - | d8 / e7 / g6 / f8 | g6 / f8 | d8 / e7 / g6 / f8 | - | d8 / e7 / g6 / f8 | g6 / f8 | e7 | m6 |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | - | - | - | H7 | H7 | - | - | - | H7 | H7 | H7 | H7 | H7 | H7 | - | - | G7 / H7 | H7 | - | H7 | - | H7 | H7 | - | H7 | - | - | - | - | - | H7 | - |
| Lubrication | Unlubricated / Regular Lubrication | Unlubricated / Regular Lubrication | - | Unlubricated | Unlubricated / Regular Lubrication | - | Unlubricated / Regular Lubrication | - | - | - | - | Unlubricated / Regular Lubrication | - | - | Unlubricated | Unlubricated | - | - | - | - | - | - | Unlubricated / Regular Lubrication | Unlubricated | Unlubricated / Regular Lubrication | Unlubricated | Unlubricated | - | Unlubricated / Regular Lubrication | Unlubricated / Regular Lubrication | Unlubricated | - | Unlubricated / Regular Lubrication | Unlubricated / Regular Lubrication | Unlubricated | Unlubricated / Regular Lubrication |
| Thickness t(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 10 | - | - | - | 2 ～ 5 | - | - | - | - | - |
| Max. Allowable Surface Pressure P(N/mm2) | 20.3 | 20.3 | 29 | 29 | 10 | 29 | 20.3 | 20.3 | 29 | 29 | 29 | 10 | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 20.3 | 29 | 49 | 29 | 29 | - | 29 | 29 | 10 | - | 29 | 29 | 10 | 29 | 29 |
| Case Material | - | - | - | - | - | Steel | - | - | - | - | Steel | - | - | - | - | - | - | - | - | Steel | - | - | - | - | - | - | - | Aluminum | - | - | - | Aluminum | - | - | - | - |
| Max. Allowable Velocity V(m/s) | 0.35 | 0.35 | 0.5 | 0.5 | 1.66 | 0.5 | 0.35 | 0.35 | 0.5 | 0.5 | 0.5 | 1.66 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.35 | 0.5 | 0.25 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 1.66 | 0.5 | 0.5 | 0.5 | 1.66 | 0.5 | 0.5 |
| Length Type | - | - | - | Single | - | Single / Double / Long | - | - | - | - | Single / Double / Long | - | - | - | Single | - | - | - | - | Double | - | - | - | Single | - | - | Single | Double | - | - | Single | Single | - | - | Single | - |
| Max. Allowable PV Value Range(N/mm2•m/s) | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 | 1.1~2.0 |
| Max. Allowable PV Value(N/mm2•m/s) | - | - | 1.65 | 1.65 | 1.65 | 1.65 | - | 1.16 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.16 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 |
![Lubrication-Free Bushing Copper Alloy Straight Type [JDB-105]](http://id.misumi-ec.com/linked/material/mech/ZOB1/PHOTO/JDB.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Inner Dia. d(Ø)
-
Outer Dia. D(Ø)
-
Overall Length L(mm)
- 2
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 3.5
- 4
- 4.4
- 4.5
- 4.8
- 5
- 5.5
- 5.9
- 6
- 6.5
- 7
- 7.5
- 7.7
- 8
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.8
- 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 31.5
- 32
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 42.5
- 45
- 47
- 48
- 50
- 51
- 52
- 55
- 57
- 58
- 59
- 60
- 65
- 67
- 67.5
- 68
- 70
- 77
- 80
- 82
- 90
- 95
- 97
- 100
- 108
- 110
- 112
- 120
- 125
- 128
- 130
- 140
- 150
- 158
- 170
- 188
- 500
-
Metal Type
- Bronze
- Brass
- Cast Iron
- Sintered Steel
-
Environment
- Standard
- Heat Resistant
- Foreign Object Resistant
- Vibration Resistant
- In Oil
- In Water
- In Seawater
- In Chemical
- Conformance to Food Sanitation Law
-
Resin Type
- POM (Polyacetal)
- PTFE (Polytetrafluoroethylene)
- High Performance Polymer Composition
- Polyphenylenesulfide
-
Multi-layer
- Steel, Sintered Bronze, Polytetrafluoroethylene
- Steel, Sintered Bronze, Polyacetal
- Steel, Copper Type Sintered Alloy
- Metal Mesh, Polytetrafluoroethylene
- Aluminum, Fluororesin
-
Case Shape
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Lubrication
-
Thickness t(mm)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Case Material
-
Max. Allowable Velocity V(m/s)
-
Length Type
-
Max. Allowable PV Value Range(N/mm2•m/s)
-
Max. Allowable PV Value(N/mm2•m/s)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 1 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
Related Categories to Oil Free Bushings
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy