Clamping Screws（Tip Shape：Serrated）

• 

  Ball End Bolt (BJ730)

  IMAO CORPORATION

  - The BJ730 series, manufactured by IMAO CORPORATION, consists of ball end bolts.
  - The main body of the clamping screw is made of S45C steel and undergoes hardening and tempering. For the Flat type, it is coated with black oxide, while for the Serrated type, SCM435 steel is used.
  - The tip part of the clamping screw is made of SUJ2 steel, with a hardness ranging from HRC56 to 67 for the Flat type and HRC50 to 55 for the Serrated type.
  - The clamping screw is available in two lengths: 25mm and 50mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Clamping Screws / High Locked Screws - Non-Reverse Serrated Type

  MISUMI

  - MISUMI offers the FSMG/FSUG series of Clamping Screws / High Locked Screws with a Non-Reverse Serrated Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (FSMG) or SUS304 equivalent (FSUG).
  - The ball of the clamping screw is made of SUJ2 Equivalent (FSMG) or SUS440C equivalent (FSUG).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Clamping Screws - Non-Reverse Serrated Type

  MISUMI

  - MISUMI offers the HFMG series of Clamping Screws with a Non-Reverse Serrated Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (HFMG) and has a black oxide surface treatment.
  - The ball of the clamping screw is made of SUJ2 Equivalent with a hardness of 55-60HRC (HFMG).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Clamping Screw SCS-GB/SCSS-GB

  NABEYA BI-TECH

  The ball is a clamping screw with a jagged ball that rotates flexibly up to 9°.
  [Features]
  ·It is securely clamped by the anti-reverse mechanism.
  ·The jagged ball can be securely clamped even on rough surfaces such as casting surfaces.
  [Applications]
  ·Hold down the workpiece, etc.
  ·For tool holder set screw or pressure piece / stopper, etc.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Clamping bolt _SCB-GB/SCBS-GB

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · Ball has flexible rotation up to 9°.
  · Securely clamps with reverse prevention mechanism.
  · Notched ball firmly clamps even rough surfaces such as casting surfaces etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  HS/Gripper (Adjust Type) (HS)

  IMAO CORPORATION

  Bolt for attachment of jig, etc. Made of SKH51 with serrations at the tip, it is possible to grip hard workpieces strongly.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  PG Gripper (Adjustable Model) (PG)

  IMAO CORPORATION

  - PG Gripper (Adjustable Model) (PG) by IMAO CORPORATION.
  - The main body of the clamping screw is manufactured from SCM440 steel.
  - The main body undergoes a surface treatment known as quenching and tempering, resulting in a black oxide finish.
  - The tip part of the clamping screw is made of carbide that has been heat treated to Rc72 hardness.
  - The screw is available in 4 sizes: M10 x 1.5, M12 x 1.75, M16 x 2, M20 x 2.5.
  - The clamping screw is available in two lengths: 25mm and 50mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Workpiece Grip Ball Unit (Bolt Type), BUH

  IMAO CORPORATION

  - Workpiece Grip Ball Unit (Bolt Type), BUH series from IMAO CORPORATION.
  - The BUH series features hex-head swivel gripper screws.
  - The main body of the clamping screw is made of steel (SCM440) and undergoes quenching and tempering. It is finished with a black oxide coating.
  - There are three types of tips available for the clamping screw: serrated tips (BUH-S), plain tips (BUH-F), and polyacetal plastic plain tips (BUH-E).
  - The maximum slope angle of the tip is 10°.
  - The screw is available in two sizes: M6 x 1.0 and M8 x 1.25.
  

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

Loading...