Locating Units

• 

  [Single-Action Attachment/Release] Cam Case (for Thumb Turn Clamper and Free Approach)

  IMAO CORPORATION

  [Features]
  · Pin applies spring pressure at the cam surface inside the cam case, pulling plate inside.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  [Single-Action Attachment/Release] Thumb Turn Clamper

  IMAO CORPORATION

  A clamping part used in place of a bolt. Allows single-action tool-free replacement of jigs or the addition/removal of attachments when changing equipment setups.
  The most standard type among the single-action attachment/release product series.
  When the pin contacts the cam in the cam receptacle, the spring is compressed, pushing down the plate.
  [Features]
  · No tools required: Can be easily tightened by anyone.
  · Single-action fastening: Switch between clamped and unclamped in a single-action.
  · Fastened to the same strength by anyone: Eliminates variation in the fastening force by the person in charge.
  · ON/OFF status can be seen at a glance: Simply check the direction the knob is facing to see whether it is fastened or not.
  
  The manufacturer can loan out samples. Please apply below.
  Sample Loaning Application Form

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Feed Fingers

  MISUMI

  The minimal 20.5mm height has been added to the lineup. Best for use in limited spaces.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Thumb Turn Clamp (Free Approach)

  IMAO CORPORATION

  Highly visible (easy to tell when unlocked), safe, cam & spring type locking mechanism.
  
  The shaft is housed within the main body when unclamped, preventing interference with the base.
  The pin compresses the spring against the cam surface inside the cam case, retracting the plate.
  
  

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Quarter-Turn Clamp

  IMAO CORPORATION

  Days to Ship:	16 Day(s) or more

• 

  Automatic Latches

  MISUMI

  Thin-plated workpieces such as printed circuit boards and metal plates can be easily located.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  [Single-Action Attachment/Release] Button Lock Clamper

  IMAO CORPORATION

  [Features]
  · No flutter wedge lock
  · The ball by means of wedges pulls the plate into the push out case at the taper surface.
  

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  [Single-Action Attachment/Release] Wedge Lock Clamper

  IMAO CORPORATION

  The ball by means of wedges pulls the plate into the push out case at the taper surface.
  

  CAD ：

  2D

  Days to Ship:	1 Day(s) or more

• 

  Feed Fingers Economy Type

  MISUMI

  "Use of sheet metal for the main body has realized price reduction by approx. 50%, compared to the conventional products."

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Compact Work Supporter (BJ360)

  IMAO CORPORATION

  [Features]It prevents chattering and distortion by holding workpieces without deformation. [Product Specifications]Main body material: SC45C, Main body surface treatment: black oxide coating, Pin material: SCM440, Pin heat treatment: hardening and tempering, Pin surface treatment: black oxide coating.

  Days to Ship:	16 Day(s) or more

• 

  Shaft Clamp Linear Stop Motion (LSM)

  IMAO CORPORATION

  Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.
  
  [Features]
  · Easy operation and secure locking.
  · As clamps with internal spring, clamping is always regular.
  · As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.
  · Lever direction can be changed by 90° pitch

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Shaft Clamp, Quick Shaft Clamp (Air Operated) (QSCA)

  IMAO CORPORATION

  Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Air Compact Natural Supporter (AMNS-S)

  IMAO CORPORATION

  [Features]
  · Shaft can be locked and unlocked through air operation.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Hole Clamp

  IMAO CORPORATION

  The tapered part is flared by the wedge to contact the edge of the mount hole, adhering the plates closely.
  Use together with a positioning pin when high-accuracy positioning is required.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Quick Shaft Clamp (QSC)

  IMAO CORPORATION

  Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Square Steel Bar Slide Lock (QCSQ)

  IMAO CORPORATION

  [Features]
  · When the knob is in OFF position, there is a gap between the steel material and shaft, allowing left/right slide of steel material.
  · When the knob is in ON position, the shaft is inserted in the gap between steel material and wedge, locking the left/right slide of steel material.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Natural Supporter (Cylinder Type) (BJ351, BJ351-C)

  IMAO CORPORATION

  Retention without misshaping workpiece, preventing chattering and distortion

  Days to Ship:	Same day or more

• 

  Natural Supporter (BJ350, BJ350-C)

  IMAO CORPORATION

  Retention without misshaping workpiece, preventing chattering and distortion

  Days to Ship:	16 Day(s) or more

• 

  Protrusion Pin (Remote Control Type) (CP701)

  IMAO CORPORATION

  [Features]
  ·Ideal for positioning holes in heavy workpieces.
  ·Lever operation requires no tools.
  ·Pins can be exchanged to accommodate various workpiece holes.
  ·Remote operation is possible.
  ·Equipped with a lock mechanism for pin protrusion and pin return.
  ·A CP700 ejector pin that is easy to operate is also available.

  Days to Ship:	10 Day(s) or more

• 

  Index Mechanism_LXY-B ・ C

  NABEYA BI-TECH

  [Features]
  · Index mechanism with lever.
  · Excellent operability.
  · LXY‐B-single lever.
  · LXY‐C-doubnle lever.
  · 6° and the adjustment multiple angle, that is 2, 3, 5, 6, 10, 12, 15, 20, 30 can be positioned.
  · Mechanism with superior durability with positioning etc. by pin providing accuracy unobtainable with other methods.
  · Scales and symbol marks can be engraved.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Cam Lever_LZX

  NABEYA BI-TECH

  [Product information]
  · Lever type lever, or leverless
  · Material: Stainless steel

  Days to Ship:	11 Day(s) or more

• 

  Serration Lock_LXP

  NABEYA BI-TECH

  [Features]
  · Rotational direction positioning part.
  · With 2 serration locks in combination 6° and the adjustment multiple angle, that is 2, 3, 5, 6, 10, 12, 15, 20, 30 can be positioned.
  · At the center of the serration lock, the reamer hole and female thread have been machined.
  · In serration lock sets there are 2 types of system
  · Choose from 2 types of installation methods for machinery / equipment.
  · Used in conjunction with serration lock use guide LXP, rotation operation in loosened serration lock state is easy.
  · Used in conjunction with serration lock use spring LXP when the serration lock is loosened, serration engagement releases.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Compact Workpiece Supporter (Cam Lever Type) (BJ362)

  IMAO CORPORATION

  [Features]It prevents chattering and distortion by holding workpieces without deformation. Cam lever type.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Slotted Hole Slide Lock (QCSL)

  IMAO CORPORATION

  Usable for slotted holes and U-grooves.
  New addition of metal knob type. Excellent rigidity with no worry about breakage.
  The standard type has resin knob. Available in black and orange colors.
  [Features]
  · When the knob is in OFF position, there is a gap between the steel material and shaft, allowing left/right slide of steel material.
  · When the knob is in ON position, the shaft is inserted in the gap between steel material and wedge, locking the left/right slide of steel material.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Single-Action Sliding Lock, Spacer (QCSLSP)

  IMAO CORPORATION

  [Features]By attaching a spacer to the single-action slide lock, it can be used for steel materials of various plate thicknesses.

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  Square Steel Slide Lock (Lever Type) (QCSQ-L)

  IMAO CORPORATION

  [Features]It can be operated from the side even in narrow spaces. [Main Body Material]Zinc die-cast, chrome plating.

  CAD ：

  2D

  Days to Ship:	1 Day(s)

• 

  Sliding Lock for Square Bar

  IMAO CORPORATION

  Days to Ship:	1 Day(s)

• 

  Sliding Lock for Slotted Hole

  IMAO CORPORATION

  Days to Ship:	1 Day(s)

• 

  Riser Plate for Sliding Lock

  IMAO CORPORATION

  Days to Ship:	1 Day(s)

Loading...