Rods, Rod Stands

• 

  Rods

  SURUGA SEIKI

  A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  
  [Features]
  ■ [A40M/A41M] A stainless steel rod for mounting optical parts.
  · A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  ■ [A40/A41/A42] A stainless steel rod for mounting optical parts.
  · Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.
  · There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.

  Days to Ship:	15 Day(s) or more

• 

  Pole (end M16)

  SURUGA SEIKI

  A stainless steel pole. Used by standing on various types of stage, base, or similar using an M16P = 1 thread, and then connecting to cross clamps, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Days to Ship:	15 Day(s) or more

• 

  Adjustable Height Pole Set (Tip M6)

  SURUGA SEIKI

  Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Days to Ship:	18 Day(s) or more

• 

  Clamp Knobs

  SURUGA SEIKI

  A clamp knob for rod stands. The tip is a spring pin. The rod will not fall downward if lightly tightened. Allows for single-handed up and down adjustment.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Up/Down fine movement rod stand

  SURUGA SEIKI

  [Features]
  · A rod stand capable of upward and downward micro movements.
  · After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
  · After adjusting, fix using the vertical fixing clamps.
  · The range for micro movements is 10 mm.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Fine Vertical Movement Stand

  CHUO PRECISION INDUSTRIAL

  A stand capable of micro adjustments in the upward and downward directions.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Camera Use Shaft 1/4 inch

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A stainless steel shaft with a diameter of ø20 mm and tripod screw (nominal size 1/4").

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stand φ8

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  DXY stand

  MIRUC OPTICAL

  A large number of types are available for use in a variety of applications.

  Days to Ship:	13 Day(s) or more

Loading...