Pillow Type

• 

  Ball Bearing/Cast Iron/Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Cast Iron Pillow Type

  NTN

  One of the standard formats for bearing units, this product is equivalent to the combination of a plummer block and a self-aligning ball bearing. Can be mounted to the shaft by just tightening a ball screw, and is used frequently in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Ball Bearing/Cast Iron/Diamond Flanged

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Ball Bearing/Diamond Flanged

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Ball Bearing/Cast Iron/Square Flanged

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Ball Bearing/Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Cast iron center height pillow type unit, UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Cast Iron Pillow-Type Unit UCP

  NIPPON PILLOW BLOCK

  The most common type of bearing unit

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  [C-VALUE] Ball Bearing Units - Cast Iron, Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Stainless steel pillow type

  NTN

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Ball Bearing/Cast Iron/Bottom Mount

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Cast iron thick pillow-type

  NTN

  The bearing box is thick for high rigidity, and is also appropriate for large shock loads. Also, the mounting bolt holes are drilled for accurate positioning. For this reason, it is appropriate for use with systems such as ceiling cranes.

  CAD ：

  2D / 3D

  Days to Ship:	2 Day(s) or more

• 

  Steel Plate Ball Bearing Units/Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Plummer Block

  NTN

  This plummer block is a bearing box for either automatic spherical roller bearings or self-aligning ball bearings. Embedded with a felt seal, rubber seal, or labyrinth seal as sealing equipment, and corresponds to either grease or oil lubricant for its lubrication method.

  Days to Ship:	12 Day(s) or more

• 

  Cast iron narrow width pillow shape unit UCUP

  NTN

  A narrow width pillow unit that's optimal for space saving.
  
  [Features ]
  · Cylindrical holes, set screw system

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Plummer Block SN3000, SN3100

  TOHO

  The SN shape (standard shape) is a standard format specified by JIS, ISO, and DIN, and is the most widely used type both inside and outside of Japan.
  
  [Features]
  · This plummer block is also available in JIS standard shapes, large shapes for heavy loads, and other special formats.
  · Uses a normal cast iron screw (FC200).
  · · Can also be manufactured with ductile iron (FCD450) and cast steel (SC450) upon request.

  Days to Ship:	15 Day(s) or more

• 

  Pillow type unit, cylindrical bore type with set screw, UCP type

  ASAHI SEIKO

  Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Days to Ship:	11 Day(s) or more

• 

  Pillow Block Unit, Silver Series, Cylindrical-bore Type with Eccentric Wheel, MUP Type

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Days to Ship:	12 Day(s) or more

• 

  Ball Bearing Units-Square Flanged/C-Value

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Glass Fiber Reinforced Plastic Pillow Shape

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  Days to Ship:	15 Day(s) or more

• 

  Rolling pillow made of steel for general structure

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  Days to Ship:	12 Day(s) or more

• 

  Spheroidal graphite cast iron pillow type

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Lightweight cast iron pillow type

  NTN

  [Features]
  · A combination of plummer blocks and a ball bearing.
  [Applications]
  · Used frequently in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Steel Plate Pillow Block Unit ASPP

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Cast Iron Pillow Type UnitAdapter TypeUKP (Adapter sold separately)

  NIPPON PILLOW BLOCK

  This is a general purpose pillow unit. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Cast Iron Diamond-Flanged Unit UCFL

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing and a bearing box with a diamond-shaped flange

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Cast Iron Pillow-Type Unit UCIP

  NIPPON PILLOW BLOCK

  The UCIP bearing box is a unit designed for high loads, with thick walls for excellent rigidity.
  The drilled mounting bolt hole ensures positioning accuracy.
  This unit can withstand high loads, vibration and shock.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Cast Iron Pillow Type UCPA

  NIPPON PILLOW BLOCK

  A pillow unit designed to reduce space requirements for mounting.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Cast Iron Pillow Type UnitUP

  NIPPON PILLOW BLOCK

  This pillow unit combines a lightweight bearing with a bearing box made from a special lightweight alloy. Oil free, small, lightweight, and clean bearing unit

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Plummer Block SN500

  TOHO

  The SN shape (standard shape) is a standard format specified by JIS, ISO, and DIN, and is the most widely used type both inside and outside of Japan.

  Days to Ship:	15 Day(s) or more

• 

  Plummer Block SN600

  TOHO

  [Features]
  · The SN shape (standard shape) is a standard format specified by JIS, ISO, and DIN, and is the most widely used type both inside and outside of Japan.

  Days to Ship:	Quote

• 

  Plummer Block SN200

  TOHO

  The SN shape (standard shape) is a standard format specified by JIS, ISO, and DIN, and is the most widely used type both inside and outside of Japan.

  Days to Ship:	21 Day(s) or more

• 

  Plummer Block SNZ200

  TOHO

  The SNZ shape (different aperture diameter) is a type with a modified aperture size on one side.

  Days to Ship:	15 Day(s) or more

• 

  Plummer Block SNZ300F

  TOHO

  The SNZ shape (different aperture diameter) is a type with a modified aperture size on one side. Also, the SNZ shape (different aperture diameter) is a type with a modified aperture size on one side.

  Days to Ship:	15 Day(s) or more

• 

  Plummer Block SD200C, SD300C

  TOHO

  The SD shape (standard shape, large aperture diameter, different aperture diameter) is a dedicated heavy load plummer block with a large type automatic spherical roller bearing as internal equipment. Bolt holes for mounting are set up in four locations. The labyrinth seal compatible type is appropriate for high-speed rotation due to its sealing.

  Days to Ship:	Quote

Loading...