(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Universal Joints

Universal joints are fitting components used to transmit shaft rotation at a different angle. Hook joints are the most commonly used type of universal joint. Using a single universal joint at just one shaft end will result in non-uniform speeds, so there must always be a universal joint at each shaft end to make the speed uniform. A single constant-velocity joint can be used to always keep the speed constant even when changing the angle. Products in this category are available in several varieties to match different operating environments. For example, there are covered models that prevent contaminants from entering bearings, products that have been fully hardened to improve fatigue strength, and pre-greased needle bearings designed to withstand high-speed use. Oiling and other maintenance procedures will enable longer operation.
Days to Ship
  • All
  • Same day
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
  • 16 Day(s) or Less
  • 18 Day(s) or Less
Brand
Product Series
CAD
Days to Ship
Type
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D1(Ø)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Max. Rotational Speed Range(r/min)
Features
Body Material
Application
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

    Standard Type, Power Type B Series

      Universal Joints - Set Pin

        Paraflex CPE· CPU Model

          Cross Joint Coupling (SCJ Series)

            Universal Joints - Set Keyway / Tapped

              Standard type, corrosion resistant type, MS type and MSS type

                Bearing K-GX Type of Hexagonal Shaft Joint

                  Standard Type, Precision Type H Series

                    Reinforced B-GX Type of Hexagonal Shaft Joint

                      Universal Joint Coupling - Clamping Long Type -

                        Standard Type Hobby Type R Series

                          Join Slide SPS Series

                            Flexible Coupling (SFC Series)

                              Grooved Pin for Clevis EA953BA-10

                                Universal Double Joint EA966CJ-16

                                  Standard Type, Strong Type BD Series

                                    Standard Bearing Model, KD Model

                                      Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

                                        Standard Corrosion Resistant Type HSD/BSD

                                          Standard Miniature Model MM Model

                                            Wheel attached type spline wheel attached joint strong type B-P type

                                              Universal Joint Coupling -Set Screw Type- [SCJ]

                                                Grooved Pin for Clevis EA953BA-12

                                                  Standard Type Wear-Resistant HJD Type

                                                    Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

                                                      Joint Slide SPSS Series

                                                        Type with shaft, joint with hexagonal shaft, precision type, S-GX type

                                                          Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

                                                            With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

                                                              Shaft type spline, shaft joint, precise type H-P

                                                                Precision Shaft Fitting, Correctable, UA-C Series

                                                                  Standard Type Precision S Model

                                                                    Standard Precision Type D Model

                                                                      Standard Type Wear-Resistant HJ Series

                                                                        Standard Bearing Model, K Model

                                                                          Standard Miniature Model, M Model

                                                                            Join Slide GX Series

                                                                              Rod End Y Type

                                                                                Rod End T Type

                                                                                  Type with shaft, joint with hexagonal shaft, precision type, H-GX type

                                                                                    With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

                                                                                      Shaft attached type Joint with spline shaft Bearing type K-P model

                                                                                        Shaft type spline, shaft type joint, stainless type HS-P

                                                                                          Joint Power Type With Spline Shaft B-PS Series

                                                                                            Attached axis type Miniature type M-L type

                                                                                            Brand

                                                                                            MIYOSHI KIKAI

                                                                                            MISUMI

                                                                                            MIKI PULLEY

                                                                                            SUNGIL

                                                                                            MISUMI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            SUNGIL

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            SUNGIL

                                                                                            ESCO

                                                                                            ESCO

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            SUNGIL

                                                                                            ESCO

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            SAKAI MANUFACTURING

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            MIYOSHI KIKAI

                                                                                            Product Series

                                                                                            Standard Type, Power Type B Series

                                                                                            Universal Joints - Set Pin

                                                                                            Paraflex CPE· CPU Model

                                                                                            Cross Joint Coupling (SCJ Series)

                                                                                            Universal Joints - Set Keyway / Tapped

                                                                                            Standard type, corrosion resistant type, MS type and MSS type

                                                                                            Bearing K-GX Type of Hexagonal Shaft Joint

                                                                                            Standard Type, Precision Type H Series

                                                                                            Reinforced B-GX Type of Hexagonal Shaft Joint

                                                                                            Universal Joint Coupling - Clamping Long Type -

                                                                                            Standard Type Hobby Type R Series

                                                                                            Join Slide SPS Series

                                                                                            Flexible Coupling (SFC Series)

                                                                                            Grooved Pin for Clevis EA953BA-10

                                                                                            Universal Double Joint EA966CJ-16

                                                                                            Standard Type, Strong Type BD Series

                                                                                            Standard Bearing Model, KD Model

                                                                                            Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

                                                                                            Standard Corrosion Resistant Type HSD/BSD

                                                                                            Standard Miniature Model MM Model

                                                                                            Wheel attached type spline wheel attached joint strong type B-P type

                                                                                            Universal Joint Coupling -Set Screw Type- [SCJ]

                                                                                            Grooved Pin for Clevis EA953BA-12

                                                                                            Standard Type Wear-Resistant HJD Type

                                                                                            Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

                                                                                            Joint Slide SPSS Series

                                                                                            Type with shaft, joint with hexagonal shaft, precision type, S-GX type

                                                                                            Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

                                                                                            With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

                                                                                            Shaft type spline, shaft joint, precise type H-P

                                                                                            Precision Shaft Fitting, Correctable, UA-C Series

                                                                                            Standard Type Precision S Model

                                                                                            Standard Precision Type D Model

                                                                                            Standard Type Wear-Resistant HJ Series

                                                                                            Standard Bearing Model, K Model

                                                                                            Standard Miniature Model, M Model

                                                                                            Join Slide GX Series

                                                                                            Rod End Y Type

                                                                                            Rod End T Type

                                                                                            Type with shaft, joint with hexagonal shaft, precision type, H-GX type

                                                                                            With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

                                                                                            Shaft attached type Joint with spline shaft Bearing type K-P model

                                                                                            Shaft type spline, shaft type joint, stainless type HS-P

                                                                                            Joint Power Type With Spline Shaft B-PS Series

                                                                                            Attached axis type Miniature type M-L type

                                                                                            CAD
                                                                                            • 2D / 3D
                                                                                            • 2D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D
                                                                                            • 2D / 3D
                                                                                            • 2D
                                                                                            • 2D
                                                                                            • 2D
                                                                                            Days to Ship Same day or more Same day or more 9 Day(s) or more 11 Day(s) or more Same day or more 9 Day(s) or more 15 Day(s) or more 9 Day(s) or more 15 Day(s) or more 9 Day(s) or more 9 Day(s) or more 12 Day(s) or more 9 Day(s) or more 9 Day(s) or more 10 Day(s) or more 12 Day(s) or more 12 Day(s) or more 9 Day(s) or more 12 Day(s) or more 22 Day(s) or more 15 Day(s) or more 11 Day(s) or more 9 Day(s) or more 12 Day(s) or more 22 Day(s) or more 12 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 9 Day(s) or more 12 Day(s) or more 9 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 9 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 27 Day(s) or more
                                                                                            TypeStandard TypeStandard TypeStandard Type-Standard TypeStandard TypeShaft TypeStandard TypeShaft TypeStandard TypeStandard TypeShaft Type---Standard TypeStandard TypeStandard TypeStandard TypeStandard TypeShaft TypeStandard Type-Standard TypeStandard TypeShaft TypeShaft TypeShaft TypeShaft TypeShaft TypeStandard TypeStandard TypeStandard TypeStandard TypeStandard TypeStandard TypeShaft TypeMaintenance ComponentsMaintenance ComponentsShaft TypeShaft TypeShaft TypeShaft TypeShaft TypeShaft Type
                                                                                            Allowable Torque Range(N•m)-5.01~10.00 ~ 50.01~100.000.05~1.00 ~ 20.01~50.000.05~1.00 ~ 3.01~5.0020.01~50.00 ~ 50.01~100.00----0.05~1.00 ~ 3.01~5.00--1.01~3.00--------0.05~1.00 ~ 3.01~5.00--------0.05~1.00 ~ 10.01~20.00--------------
                                                                                            Shaft Bore Dia. (machined) D1(Ø)6 ~ 606 ~ 303 ~ 223 ~ 158 ~ 302 ~ 5.510 ~ 306 ~ 306 ~ 303 ~ 153 ~ 105 ~ 384 ~ 16--6 ~ 6010 ~ 306 ~ 606 ~ 301 ~ 2.56 ~ 303 ~ 15-6 ~ 306 ~ 256 ~ 256 ~ 306 ~ 306 ~ 306 ~ 303 ~ 256 ~ 606 ~ 606 ~ 3010 ~ 302 ~ 5.56 ~ 30--6 ~ 306 ~ 3010 ~ 306 ~ 2020 ~ 602 ~ 5.5
                                                                                            Shaft Bore Dia. (machined) D2(Ø)--3 ~ 223 ~ 15-----3 ~ 15--4 ~ 16--------3 ~ 15--------3 ~ 25--------------
                                                                                            Outer Dia. A(Ø)12 ~ 12012 ~ 5119 ~ 4615 ~ 4019 ~ 366 ~ 1020 ~ 6012.5 ~ 5712 ~ 6015 ~ 408 ~ 195 ~ 3529 ~ 54--12 ~ 12020 ~ 6012.5 ~ 12012.5 ~ 602 ~ 512 ~ 6015 ~ 40-12 ~ 5116 ~ 506 ~ 2216 ~ 5812 ~ 5116 ~ 5812.5 ~ 5715 ~ 5516 ~ 11516 ~ 11512 ~ 5120 ~ 606 ~ 1011 ~ 54-8 ~ 4812.5 ~ 5712 ~ 5120 ~ 6012.5 ~ 4040 ~ 1206 ~ 10
                                                                                            Overall Length W(mm)50 ~ 30031 ~ 13919.4 ~ 5422.4 ~ 45.642 ~ 13915 ~ 30194~309 ~ 546~71140 ~ 165162~270 ~ 553~71124.2 ~ 5124 ~ 42-28 ~ 58--75 ~ 48596 ~ 27540 ~ 30065 ~ 2759 ~ 24168.5~266.5 ~ 556~118522.4 ~ 45.6-49.5 ~ 19540 ~ 108-111~238 ~ 397~599105~232 ~ 399~599136.5~244 ~ 444~1095148.5~252 ~ 530~116418 ~ 5834 ~ 22050 ~ 34031 ~ 12262 ~ 17815 ~ 30-16 ~ 10016 ~ 96131~250 ~ 517~685130.5~238 ~ 444~1094219~450 ~ 556~1188.5148.5~252 ~ 335~842324~806 ~ 760~131283 ~ 200
                                                                                            Max. Rotational Speed Range(r/min)100~ 300 ~ 1001~2000-2001~4000 ~ 4001~100002001~4000 ~ 4001~10000-100~ 300 ~ 301~1000-301~1000 ~ 1001~2000-2001~4000 ~ 10001~78000--2001~4000--100~ 300 ~ 1001~2000301~1000 ~ 2001~4000< 100 ~ 301~1000100~ 300 ~ 301~1000--2001~4000 ~ 10001~78000-301~1000 ~ 1001~2000------4001~10000100~ 300 ~ 2001~4000100~ 300 ~ 1001~2000301~1000 ~ 1001~2000301~1000 ~ 2001~4000301~1000---------
                                                                                            FeaturesHigh Torque-High Accuracy ~ Small----High Accuracy ~ High DurabilityHigh TorqueHeat Resistant ~ Small-----High Torque---SmallHigh TorqueHeat Resistant ~ Small----High Accuracy ~ Small-High Accuracy ~ SmallHigh Accuracy ~ High DurabilityHigh Torsional Rigidity ~ Low Moment of InertiaHigh Accuracy ~ SmallHigh Accuracy ~ Small--Small---High Accuracy ~ High Durability---High TorqueSmall
                                                                                            Body MaterialSteelSteelAluminumAluminum AlloySteelStainless SteelSteelSteelSteelAluminum ~ Aluminum AlloySteelSteelSteel--SteelSteelStainless SteelStainless SteelStainless Steel ~ SteelSteelAluminum ~ Aluminum Alloy-SteelAlloyStainless SteelSteelSteelSteelSteelAluminumSteelSteelSteelSteelSteelSteelSteelSteelSteelSteelSteelStainless SteelSteelSteel
                                                                                            ApplicationStandardStandardStandard / Servo Motor / Stepping Motor-StandardStandardStandardStandardStandardServo MotorStandardStandard---StandardStandardStandardStandardStandardStandardServo Motor-StandardStandardStandardStandardStandardStandardStandardStandard / Servo Motor / Stepping Motor / EncoderStandardStandardStandardStandardStandardStandardStandardStandardStandardStandardStandardStandardStandardStandard
                                                                                            Allowable Torque(N•m)-5.3 ~ 4950.4 ~ 250.25 ~ 520.1 ~ 175----0.25 ~ 5--0.12 ~ 1.5--------0.25 ~ 5--------0.25 ~ 20--------------
                                                                                            Max. Rotational Speed(r/min)220 ~ 1700-3000 ~ 60004000 ~ 6000-300 ~ 600-510 ~ 2000-3500 ~ 18000--3000--160 ~ 1300730 ~ 220090 ~ 800150 ~ 640--4000 ~ 21000-380 ~ 1400------6000280 ~ 2100200 ~ 1500500 ~ 1800950 ~ 2500700 ~ 1000---------
                                                                                            Allowable Lateral Misalignment Range(mm)--0.02~0.2 ~ 0.41~1.00.21~0.40 ~ 0.41~1.0-----0.21~0.40--1.1~3.0--------0.21~0.40 ~ 0.41~1.0--------0.02~0.2--------------
                                                                                            Allowable Lateral Misalignment(mm)--0.2 ~ 0.50.3 ~ 0.5-----0.3 ~ 0.5--2 ~ 3--------0.3 ~ 0.5--------0.2--------------
                                                                                            Allowable Angular Misalignment(deg)--1 ~ 43-----7--10 ~ 12--------3--------1--------------

                                                                                            Loading...

                                                                                            Related Categories to Universal Joints