(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Universal Joints（Body Material：Steel）
| Days to Ship |
|
|---|
-
MIYOSHI KIKAI
SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.
- CAD ：
- 2D
Days to Ship: 11 Day(s) or more -
Standard Type, Strong Type BD Series
MIYOSHI KIKAI
[Features]
· High torque normal use.
· Material: S45C
· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.Days to Ship: 11 Day(s) or more -
- On Sale Till 31/03/2025
MISUMI
[Features]·This is a coupling that allows the joining angle to be changed freely.
- Volume Discount
Special Price Days to Ship: Same day or more -
Universal Joints - Set Keyway / Tapped
MISUMI
[Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.
- Volume Discount
Days to Ship: Same day or more -
Standard Type, Power Type B Series
MIYOSHI KIKAI
[Features]
· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.Days to Ship: 11 Day(s) or more -
Standard Type Wear-Resistant HJ Series
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· To extend life, boots and oil pack should be used.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.Days to Ship: 11 Day(s) or more -
Days to Ship: 10 Day(s) or more -
Standard Type Wear-Resistant HJD Type
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.Days to Ship: 11 Day(s) or more -
Type with shaft, joint with hexagonal shaft, precision type, S-GX type
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.Days to Ship: 14 Day(s) or more -
Standard Type Precision S Model
MIYOSHI KIKAI
Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.Days to Ship: 11 Day(s) or more -
Standard Precision Type D Model
MIYOSHI KIKAI
[Features]
· Spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.Days to Ship: 11 Day(s) or more -
Standard Miniature Model, M Model
MIYOSHI KIKAI
High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.
Days to Ship: 11 Day(s) or more -
Shaft type spline, shaft joint, precise type H-P
MIYOSHI KIKAI
Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.
Days to Ship: 14 Day(s) or more -
Flexible Shaft Compact Design SF Type (Flexible Shaft)
SHOWA SPRING
Low power / high speed can be changed for transmission freely in the desired direction.
Days to Ship: 12 Day(s) or more -
Standard Type, Precision Type H Series
MIYOSHI KIKAI
[Features]
·The pin is dry lubricated to improve abrasion resistance.
·Please use boots and oil packs to extend the life of the joints.
·For B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, spring pin is not included.Days to Ship: 11 Day(s) or more -
Standard Bearing Model, K Model
MIYOSHI KIKAI
[Features]
·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
·K-20 and above have a grease nipple.
·When using boots, please use type B or type H.
·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, the spring pins are not included.
[Applications]
·For high speed rotation.Days to Ship: 11 Day(s) or more -
Standard Bearing Model, KD Model
MIYOSHI KIKAI
[Features]
·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.Days to Ship: 11 Day(s) or more -
Standard Miniature Model MM Model
MIYOSHI KIKAI
High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.
Days to Ship: 21 Day(s) or more -
Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model
MIYOSHI KIKAI
[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.Days to Ship: 11 Day(s) or more -
With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model
MIYOSHI KIKAI
[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.
Days to Ship: 14 Day(s) or more -
MIYOSHI KIKAI
GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.
[Features]
· The hex shaft and sleeve can be cut at any position.
· Cannot be used in sliding part while rotating.
· When using as a slide unit, the NX slide unit should also be considered.- CAD ：
- 2D
Days to Ship: 11 Day(s) or more -
Type with shaft, joint with hexagonal shaft, precision type, H-GX type
MIYOSHI KIKAI
The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.
Days to Ship: 14 Day(s) or more -
Reinforced B-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Shaft can be freely cut at any point.
· Expansion / contraction range is large for broad range of installations.Days to Ship: 14 Day(s) or more -
Bearing K-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Comprises 2 standard joints and joint slide (GXS, GXA).
· Joint and join slide are set with spring pin.
· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
· Please note, if set incorrectly, output wheel speed will become uneven.Days to Ship: 14 Day(s) or more -
With Shaft Model Joints with Spline Shaft Accurate Model S-P Model
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.Days to Ship: 14 Day(s) or more -
Wheel attached type spline wheel attached joint strong type B-P type
MIYOSHI KIKAI
[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.Days to Ship: 14 Day(s) or more -
Shaft attached type Joint with spline shaft Bearing type K-P model
MIYOSHI KIKAI
Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.
Days to Ship: 14 Day(s) or more -
Joint Power Type With Spline Shaft B-PS Series
MIYOSHI KIKAI
[Features]
· P series are short-lead, easy order type.
· Comprising of 2 standard joints (SPS, and join slide SPA).
· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
· When setting, please ensure symmetry of left / right joint assembly.
· Please note, if set incorrectly, output shaft speed will become uneven.Days to Ship: 14 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shaft Bore Dia. (machined) D1(Ø) |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Features |
| Application |
| Type |
| Max. Rotational Speed Range(r/min) |
| Body Material |
| Allowable Torque(N•m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MIYOSHI KIKAI | MIYOSHI KIKAI | MISUMI | MISUMI | MIYOSHI KIKAI | MIYOSHI KIKAI | SUNGIL | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | SHOWA SPRING | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI |
| Product Series | Type with shaft, joint with hexagonal shaft, precision type, S-GX type | With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model | Type with shaft, joint with hexagonal shaft, precision type, H-GX type | With Shaft Model Joints with Spline Shaft Accurate Model S-P Model | Wheel attached type spline wheel attached joint strong type B-P type | Shaft attached type Joint with spline shaft Bearing type K-P model | ||||||||||||||||||||||
| CAD |
|
|
|
|
| |||||||||||||||||||||||
| Days to Ship | 11 Day(s) or more | 11 Day(s) or more | Same day or more | Same day or more | 11 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | 11 Day(s) or more | 14 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 14 Day(s) or more | 12 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 21 Day(s) or more | 11 Day(s) or more | 14 Day(s) or more | 11 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more |
| Shaft Bore Dia. (machined) D1(Ø) | 5 ～ 38 | 6 ～ 60 | 6 ～ 30 | 10 ～ 20 | 6 ～ 60 | 6 ～ 30 | 4 ～ 16 | 6 ～ 30 | 8 ～ 30 | 6 ～ 60 | 6 ～ 60 | 2 ～ 5.5 | 6 ～ 30 | - | 6 ～ 30 | 10 ～ 30 | 10 ～ 30 | 1.5 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 20 ～ 60 |
| Allowable Torque Range(N•m) | - | - | 5.01~10.00 ～ 100 < 500 | 20.01~50.00 ～ 50.01~100.00 | - | - | 1.01~3.00 | - | - | - | - | - | - | 0.05~1.00 ～ 1.01~3.00 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. (machined) D2(Ø) | - | - | - | - | - | - | 4 ～ 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. A(Ø) | 5 ～ 35 | 12 ～ 120 | 12 ～ 51 | 19 ～ 36 | 12 ～ 120 | 12 ～ 51 | 29 ～ 54 | 12 ～ 51 | 18 ～ 58 | 16 ～ 115 | 16 ～ 115 | 6 ～ 10 | 12.5 ～ 57 | - | 12.5 ～ 57 | 20 ～ 60 | 20 ～ 60 | 3 | 12 ～ 51 | 12 ～ 51 | 11 ～ 54 | 12.5 ～ 57 | 12 ～ 60 | 20 ～ 60 | 16 ～ 58 | 12 ～ 60 | 20 ～ 60 | 40 ～ 120 |
| Overall Length W(mm) | - | 75 ～ 485 | 31 ～ 139 | 42 ～ 139 | 50 ～ 300 | 31 ～ 122 | 28 ～ 58 | 49.5 ～ 195 | 132~245 ～ 397~599 | 34 ～ 220 | 50 ～ 340 | 15 ～ 30 | 148.5~252 ～ 530~1164 | 150 ～ 300 | 40 ～ 165 | 62 ～ 178 | 96 ～ 275 | 12 | 105~232 ～ 399~599 | 130.5~238 ～ 444~1094 | - | 131~250 ～ 517~685 | 162~270 ～ 553~711 | 194~309 ～ 546~711 | 136.5~244 ～ 444~1095 | 168.5~266.5 ～ 556~1185 | 219~450 ～ 556~1188.5 | 324~806 ～ 760~1312 |
| Features | - | High Torque | - | - | High Torque | - | - | - | High Accuracy ～ Small | High Accuracy ～ Small | High Accuracy ～ Small | Small | High Accuracy ～ High Durability | - | High Accuracy ～ High Durability | - | - | Small | - | - | - | High Accuracy ～ High Durability | High Torque | - | High Accuracy ～ Small | High Torque | - | High Torque |
| Application | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Type | Shaft Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | - | Standard Type | Shaft Type | Standard Type | Standard Type | Standard Type | Shaft Type | Flexible Type | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type |
| Max. Rotational Speed Range(r/min) | - | 100~ 300 ～ 1001~2000 | - | - | 100~ 300 ～ 1001~2000 | 301~1000 ～ 1001~2000 | 2001~4000 | 301~1000 ～ 1001~2000 | - | 100~ 300 ～ 2001~4000 | 100~ 300 ～ 1001~2000 | 301~1000 | - | - | 301~1000 ～ 1001~2000 | 301~1000 ～ 2001~4000 | 301~1000 ～ 2001~4000 | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Allowable Torque(N•m) | - | - | 5.3 ～ 495 | 20.1 ～ 175 | - | - | 0.12 ～ 1.5 | - | - | - | - | - | - | 0.392 ～ 1.862 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Rotational Speed(r/min) | - | 160 ～ 1300 | - | - | 220 ～ 1700 | 500 ～ 1800 | 3000 | 380 ～ 1400 | - | 280 ～ 2100 | 200 ～ 1500 | 700 ～ 1000 | - | - | 510 ～ 2000 | 950 ～ 2500 | 730 ～ 2200 | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment Range(mm) | - | - | - | - | - | - | 1.1~3.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | - | - | - | - | - | - | 2 ～ 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | - | - | - | - | - | - | 10 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shaft Bore Dia. (machined) D1(Ø)
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
-
Overall Length W(mm)
- 9
- 12
- 15
- 18
- 19.1
- 19.4
- 20
- 22.4
- 23.6
- 24
- 24.2
- 26.5
- 27
- 27.2
- 28
- 28.5
- 30
- 30.6
- 31
- 33.5
- 34
- 35
- 35.3
- 35.6
- 36
- 37.6
- 39
- 40
- 41.7
- 42
- 43
- 44
- 45
- 45.6
- 46.2
- 49.5
- 50
- 50.8
- 51
- 51.4
- 52
- 53.3
- 54
- 56
- 58
- 59
- 60
- 62
- 62.1
- 65
- 67.5
- 67.6
- 68
- 70
- 71
- 72
- 73
- 74
- 75
- 75.5
- 76
- 80
- 81
- 82
- 83
- 84
- 86
- 87
- 88
- 89.8
- 90
- 92
- 94
- 94.5
- 95
- 96
- 100
- 102
- 104
- 105
- 105~232
- 108
- 112
- 115
- 117.5
- 120
- 122
- 122~237
- 124
- 125
- 126
- 127
- 129
- 130
- 130.5~238
- 131~250
- 132~245
- 134
- 136~269
- 136.5~244
- 139
- 140
- 143
- 144
- 144~275
- 145
- 147.5~402
- 148.5~252
- 149
- 150
- 153
- 155.5~409
- 156
- 158
- 160
- 162~270
- 163
- 163~265
- 164
- 164~283
- 165
- 167
- 168
- 168~287
- 168.5~266.5
- 175
- 175.5~423.5
- 176~297
- 178
- 179~418
- 180
- 180~277
- 180.5~423.5
- 182
- 185~423
- 187.5~433
- 188
- 190
- 192
- 192~360
- 194~309
- 195
- 198~366
- 200
- 206
- 207~440
- 212
- 212~321
- 212~440
- 219~373
- 219~450
- 220
- 220~547
- 224~325
- 224~551
- 228
- 231~458
- 233~331
- 241~391
- 242~561
- 244~404
- 248
- 248~567
- 250
- 257~575
- 259~403
- 262~580
- 264~351
- 265~577
- 268~584.5
- 269~422
- 270
- 270~444
- 275
- 283~593
- 284~454
- 288~599
- 290
- 294~794
- 295~602
- 298
- 299~436
- 300
- 305~535
- 307~533
- 310
- 312~808.5
- 316~480
- 318~621.5
- 319~811
- 324~806
- 326
- 329~819
- 330~451
- 335~842
- 340
- 340~1018
- 343~638.5
- 345~575
- 349~581
- 350
- 353~1036
- 355~842
- 355~1040
- 360~1034
- 380~500
- 383~528
- 388~528
- 390
- 395~1065
- 397~599
- 399~599
- 399~617
- 401~1072
- 403~878
- 403~880.5
- 407~605
- 425~1094
- 426
- 434~645
- 437~1101
- 441~645
- 444~1094
- 444~1095
- 458~1095
- 465~1122
- 465~1125.5
- 485
- 517~685
- 520~1136
- 530~1164
- 546~711
- 553~711
- 556~1185
- 556~1188.5
- 588~1182
- 650~1223
- 690~1255
- 760~1312
-
Features
-
Application
-
Type
-
Max. Rotational Speed Range(r/min)
-
Body Material
-
Allowable Torque(N•m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
Narrow search by specifying Manufacturer
-
- MIYOSHI KIKAI (24)
- SHOWA SPRING (1)
- SUNGIL (1)
- MIGHTY (0)
- MIKI PULLEY (0)
- SAKAI MANUFACTURING (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy