(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Frame Caps

An extrusion end cap is an accessory part for aluminum extrusions that plays a role in protecting the end face of the aluminum extrusion, dust-proofing, and preventing injury. There are many products that can be easily installed without additional work on the aluminum extrusion, and some products have excellent detachment resistance by securing with the attached countersunk bolts. The shape of the extrusion end cap can be square, rectangular, R shape or L shape, so it is necessary to select it according to the aluminum extrusion to be installed. The color of the extrusion end cap can be selected from light gray and black. In addition, there is also a stainless steel plate cap dedicated to high-rigid aluminum extrusions (GFS series / GNFS series). In use, alterations of tapped holes in the aluminum extrusion cross section is required.

Cap Type

43 items

: 30; 45; 60

Recommendation
MiSUMi Economy
End Cap For Aluminum Frames With Groove Width of 8 mm【1-20 Pieces Per Package】【1-20 Pieces Per Package】

MISUMI

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Recommendation
MiSUMi Economy
End Caps For Aluminum Frames【1-20 Pieces Per Package】

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames

MISUMI

This is Frame cap for protecting frame end faces. Using with Aluminum Frame Series 6 (Slot width 8mm)

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Frame End Caps - For 8 Series (Slot Width 10mm) Aluminum Frames

MISUMI

This is Frame cap for protecting frame end faces. Using with Aluminum Frame Series 8 (Slot width 10mm)

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
MiSUMi Economy
End Cap For Aluminum Frames With Groove Width of 10 mm【1-20 Pieces Per Package】【1-20 Pieces Per Package】

MISUMI

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames

MISUMI

This is Frame cap for protecting frame end faces. Using with Aluminum Frame Series 5 (Slot width 6mm)

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Frame Cap For 5 Series (Slot Width 6 mm) Aluminum Frame - Screw Mounted

MISUMI

This is Frame cap screw mounting type for Aluminum Frame Series 5-2020 and 5-2040. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
MiSUMi Economy
Zinc Alloy End Caps For Aluminum Frames

MISUMI

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Screw Mounted - For 8 Series (Slot Width 10mm) Aluminum Frames

MISUMI

This is Frame cap screw mounting type for Aluminum Frame Series 8-4040 and 8-4080. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Screw Mounted - For 6 Series (Slot Width 8mm) Aluminum Frames

MISUMI

This is Frame cap screw mounting type for Aluminum Frame Series 6-3030 and 6-3060. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame

MISUMI

This is Frame cap for protecting frame end faces. Using with Aluminum Frame Series 8-45 (Slot width 10mm)

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
M4 Series End Cap

NIC AUTOTEC

Structural material for factory automation equipment

CAD ：

2D / 3D

Days to Ship: 16 Day(s) or more
End Plates - For 6 Series (Slot Width 8mm) Aluminum Frames

MISUMI

This is Frame cap for HFSR6-606030. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames - Three-Sided Caps for Corners

MISUMI

This is three-sided frame cap that is attached to the corner of Aluminum Frame Series 5 (Slot width 6mm)

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Three-Sided Cap for Corners - For 6 Series (Slot Width 8mm) Aluminum Frames

MISUMI

This is three-sided frame cap that is attached to the corner of Aluminum Frame Series 6-3030

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame - Screw Mounted

MISUMI

This is Frame cap screw mounting type for Aluminum Frame Series 8-4545 and 8-4590. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: Same day or more
Oil Pan Cap

NIC AUTOTEC

·Structural element of factory automation equipment. [Materials]Polyester "UP", elastomer [TPE]

CAD ：

2D / 3D

Days to Ship: 16 Day(s) or more
Counterbore Cap

NIC AUTOTEC

·Structural element of factory automation equipment. [Materials]Rigid polyethylene [HDPE]

CAD ：

2D / 3D

Days to Ship: 16 Day(s) or more
End Cap

YAMATO CO LTD

● Cap for Yamato aluminum extrusions. [Materials]Resin (PPS).

STOCK
Days to Ship: 1 Day(s) or more
End Cap for 46

YUKIGIKEN

[Applications]
· A small cap dedicated for 40 x 60 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 152

YUKIGIKEN

[Applications]
· A small cap dedicated for 152 frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
Frame End Caps For 8-45 Series (Slot Width 10mm) Aluminum Frames - End Plates

MISUMI

This is Frame cap for HFSR5-404020. No additional alteration required.

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Plates for High Rigidity Type - For 6 Series (Slot Width 8mm) Aluminum Frames

MISUMI

This is Frame cap that is only attached to High Rigidity Aluminum Frame GFS6-3030 and GFS6-3060

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Three-Sided Caps for Corners - For 8 Series (Slot Width 10mm) Aluminum Frames

MISUMI

This is Three-sided Frame cap that is attached to the corner of Aluminum Frame Series 8-4040

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Plates for High Rigidity Type

MISUMI

This is Frame cap that is only attached to High Rigidity Aluminum Frame. Special alteration is required on cross sections of frame.

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
Plates for High Rigidity Type - For 8 Series (Slot Width 10mm) Aluminum Frames

MISUMI

Extrusion End Caps only for High Rigidity Aluminum Extrusions. Specific alterations are required for installing them.

Volume Discount

CAD ：

2D / 3D
Days to Ship: 16 Day(s) or more
End Cap for 23

YUKIGIKEN

[Applications]
· A small cap dedicated for 23M frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 24

YUKIGIKEN

[Applications]
· A small cap for 20 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 26

YUKIGIKEN

[Applications]
· A small cap dedicated for 20 x 60 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 33

YUKIGIKEN

[Applications]
· A small cap dedicated for 33M frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 34

YUKIGIKEN

[Applications]
· A small cap dedicated for 30 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 44

YUKIGIKEN

[Applications]
· A small cap dedicated for 40 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 66S

YUKIGIKEN

[Applications]
· A small cap dedicated for 66S frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 48

YUKIGIKEN

[Applications]
· A small cap dedicated for 40 x 80 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 40A

YUKIGIKEN

[Applications]
· A small cap dedicated for 40A frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 412

YUKIGIKEN

[Applications]
· A small cap dedicated for 40 x 120 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cover

YUKIGIKEN

[Applications]
· A small safety end cap for protecting the end surface of the frame.
· M10 end face tapping and M12, 16 end face tapping are also supported and casters/adjusters can be installed.
· Can also be used with commercially-available square pipes and rods.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 153

YUKIGIKEN

[Applications]
· A small cap dedicated for 153 frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 154

YUKIGIKEN

[Applications]
· A small cap dedicated for 154 frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 240

YUKIGIKEN

[Applications]
· A small cap dedicated for 240 frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 255

YUKIGIKEN

[Applications]
· A small cap dedicated for 255 frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more
End Cap for 25

YUKIGIKEN

[Applications]
· A small cap dedicated for 25L frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 16 Day(s) or more
End Cap for 25A

YUKIGIKEN

[Applications]
· A small cap dedicated for 25A frames.
· It protects the cut surface of the frame and prevents injury.

[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.

CAD ：

2D

Days to Ship: 11 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Specifications
Cap Type
Mounting Method
Extrusion Size
Extrusion Series
Material

	Recommendation	Recommendation
Brand	MISUMI MiSUMi Economy	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI MiSUMi Economy	MISUMI	MISUMI	MISUMI	NIC AUTOTEC	MISUMI	MISUMI	MISUMI	MISUMI	NIC AUTOTEC	NIC AUTOTEC	YAMATO CO LTD	YUKIGIKEN	YUKIGIKEN	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN	YUKIGIKEN
Product Series	End Cap For Aluminum Frames With Groove Width of 8 mm【1-20 Pieces Per Package】【1-20 Pieces Per Package】	End Caps For Aluminum Frames【1-20 Pieces Per Package】	Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames	Frame End Caps - For 8 Series (Slot Width 10mm) Aluminum Frames	End Cap For Aluminum Frames With Groove Width of 10 mm【1-20 Pieces Per Package】【1-20 Pieces Per Package】	Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames	Frame Cap For 5 Series (Slot Width 6 mm) Aluminum Frame - Screw Mounted	Zinc Alloy End Caps For Aluminum Frames	Screw Mounted - For 8 Series (Slot Width 10mm) Aluminum Frames	Screw Mounted - For 6 Series (Slot Width 8mm) Aluminum Frames	Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame	M4 Series End Cap	End Plates - For 6 Series (Slot Width 8mm) Aluminum Frames	Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames - Three-Sided Caps for Corners	Three-Sided Cap for Corners - For 6 Series (Slot Width 8mm) Aluminum Frames	Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame - Screw Mounted	Oil Pan Cap	Counterbore Cap	End Cap	End Cap for 46	End Cap for 152	Frame End Caps For 8-45 Series (Slot Width 10mm) Aluminum Frames - End Plates	Plates for High Rigidity Type - For 6 Series (Slot Width 8mm) Aluminum Frames	Three-Sided Caps for Corners - For 8 Series (Slot Width 10mm) Aluminum Frames	Plates for High Rigidity Type	Plates for High Rigidity Type - For 8 Series (Slot Width 10mm) Aluminum Frames	End Cap for 23	End Cap for 24	End Cap for 26	End Cap for 33	End Cap for 34	End Cap for 44	End Cap for 66S	End Cap for 48	End Cap for 40A	End Cap for 412	End Cover	End Cap for 153	End Cap for 154	End Cap for 240	End Cap for 255	End Cap for 25	End Cap for 25A
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D
Days to Ship	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	16 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	16 Day(s) or more	11 Day(s) or more
Specifications																			STOCK
Cap Type	Square Shape / Single Radius Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape / Angled Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape / Angled Shape	Square Shape / Rectangle Shape / Single Radius Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape / Angled Shape	Square Shape / Rectangle Shape	Square Shape / Rectangle Shape	Square Shape / Rectangle Shape	Square Shape / Rectangle Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape / Angled Shape	Square Shape / Rectangle Shape / Single Radius Shape / L Shape / L/R Shape / Angled Shape / Three-Sided Shape	L/R Shape	Three-Sided Shape	Three-Sided Shape	Square Shape / Rectangle Shape	Single Radius Shape	Single Radius Shape	Square Shape	Rectangle Shape	Rectangle Shape	L/R Shape	Square Shape / Rectangle Shape	Three-Sided Shape	Square Shape / Rectangle Shape	Square Shape / Rectangle Shape	Rectangle Shape	Rectangle Shape	Rectangle Shape	Square Shape	Rectangle Shape	Square Shape	Square Shape	Rectangle Shape	Angled Shape	Rectangle Shape	-	Rectangle Shape	Rectangle Shape	Rectangle Shape	Rectangle Shape	Square Shape	Angled Shape
Mounting Method	Cap Mount	Cap Mount	Cap Mount	Cap Mount	Cap Mount	Cap Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Cap Mount	Cap Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Cap Mount	Cap Mount	Cap Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Cap Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	-	Cap Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount	Screw Mount
Extrusion Size	3030 ～ 8080	2020 ～ 9090	30A6 ～ 606030	30A8 ～ 808040	4545 ～ 50100	30A5 ～ 404020	2020 ～ 2040	2020 ～ 8080	4040 ～ 4080	3030 ～ 3060	30A8-45 ～ 909045	-	R6-606030	2020	3030	4545 ～ 4590	-	-	YF2020-4 ～ YF6060-6	F46F, F46L, F46M	F152	R5-404020	3030 ～ 3060	4040	4545 ～ 100200	4040 ～ 4080	F23M	F24K, F24M, F24H	F26K, F26M	F33M	F43K/F34K/F34E/F43W	□ All 40 Types	F66S	F48L, F48M	F40A	F412	-	F153	F154	F240	F255	F25L	F25A
Extrusion Series	-	-	MISUMI 6 Series	MISUMI 8 Series	-	MISUMI 5 Series	MISUMI 5 Series	-	MISUMI 8 Series	MISUMI 6 Series	MISUMI 6 Series / MISUMI 8 Series / MISUMI 8-45 Series	NIC Autotec M4 Series	MISUMI 6 Series	MISUMI 5 Series	MISUMI 6 Series	MISUMI 8 Series	NIC Autotec M6 Series	NIC Autotec M4 Series / NIC Autotec M6 Series / NIC Autotec M8 Series	-	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	MISUMI 5 Series	MISUMI 6 Series	MISUMI 8 Series	MISUMI 8-45 Series	MISUMI 8 Series	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 40 Series (For Medium/Heavy Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	LECOFRAME 25 Series (For Light/Medium Structures)	LECOFRAME 25 Series (For Light/Medium Structures)
Material	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	-	Plastic	Plastic	Plastic	Plastic	Stainless Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Stainless Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic

Configure

Specification/Dimensions

Mounting Method
- Cap Mount
- Screw Mount
Clear

Extrusion Size
R5-404020

R6-606030

F23M

F24K, F24M, F24H

F25A

F25L

F26K, F26M

30A5

30A6

30A8

30A8-45

F33M

F40A

□ All 40 Types

F43K/F34K/F34E/F43W

45A5

45A6

45A8

45A8-45

F46F, F46L, F46M

F48L, F48M

60A5

60A6

60A8

60A8-45

F66S

F152

F153

F154

F240

F255

F412

2020

YF2020-4

2040

YF2040-4

2060

2525

2550

3030

YF3030-6

3060

YF3060-6

3090

4040

YF4040-8

4060

4080

YF4080-8

4545

4560

4590

5050

6060

YF6060-6

6090

8080

8840

9090

40120

50100

60120

100100

100200

404020

606030

808040

909045
Clear

Extrusion Series
Clear

Material
- Plastic
- Stainless Steel
Clear

Narrow search by specifying Manufacturer

- MISUMI (20)
- Economy series (4)
Clear

CAD

- 2D
- 3D
Clear

Days to Ship

All

Same day

1 Day(s) or Less

6 Day(s) or Less

10 Day(s) or Less

11 Day(s) or Less

12 Day(s) or Less

13 Day(s) or Less

16 Day(s) or Less
Clear

Related Categories to Frame Caps

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Frame Caps

Cap Type

Configure

Specification/Dimensions

Mounting Method

Extrusion Size

Extrusion Series

Material

Narrow search by specifying Manufacturer

CAD

Days to Ship

Related Categories to Frame Caps

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Frame Caps

Cap Type

Configure

Specification/Dimensions

Mounting Method

Extrusion Size

Extrusion Series

Material

Narrow search by specifying Manufacturer

CAD

Days to Ship

Related Categories to Frame Caps

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB