Adjuster Pads

• • Recommendation

  

  MiSUMi Economy

  Anchors For Aluminum Frames

  MISUMI

  Anchors For Aluminum Frames
  These anchors for aluminum extrusions are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
  [Feature]
  - Body Height (mm.) : 170 and 210
  - Mounting Direction : Left and Right side
  - Applicable For Aluminum Extrusions Series : 30/40 and 40/50/60
  - Material : Carbon steel
  - Surface Treatment: Zinc Plating
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• • Recommendation

  

  MiSUMi Economy

  Inclined Anchors For Aluminum Frames

  MISUMI

  • Volume Discount

  Days to Ship:	10 Day(s)

• 

  Leveling Mounts/Heavy Load Type

  MISUMI

  Leveling Mounts/Heavy Load Type
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes and materials to choose from.
  [Feature]
  - Bottom Diameter (mm.) : 60 and 70
  - Thread Size : M10, M12, M16, M20 and M24
  - Screw Length : The size is configurable between 80 to 300 mm, and the minimum length can be increased by increments 10 mm.
  - Material : SS400 Equivalent and SUS304 Equivalent
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Leveling Mount Unit

  MISUMI

  Leveling Mount Unit
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  
  [Feature]
  - Set components : Plate, Leveling mounting, Screw and Nut
  - Applicable For Aluminum Extrusions Size : 5-2020, 6-6060, 6-5050, 6-3030, 8-9090, 8-8080, 8-4040 and 8-4545
  - Remark : Washer are included with HAJPS8080 only
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Anchors/Heavy Type

  MISUMI

  "With reinforced ribs, thicker than the Standard Type. 25mm increased height enables the product to be mounted in higher positions."

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Leveling Mounts for Aluminum Frame/Standard Type

  MISUMI

  Space saving type leveling mount. When mounted directly on the aluminum extrusion, the pad does not protrude from the outer dimensions.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Rubber Cushion

  NIC AUTOTEC

  Rubber Cushion
  This rubber cushion is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 20 X 12
  - Applicable Series : M4
  - Material : SBR, SUS430
  - Color : Black
  - Weight (g): 4
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor

  MISUMI

  Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Body Height (mm.) : 146
  - Applicable For Aluminum Extrusions Series :
  4-point Anchor Type : HFS6-3030 and HFS6-3060
  2-point Anchor Type : HFS8-4040 and HFS8-4080
  - Material : SPHC
  - Surface Treatment: Trivalent Chromate
  [Application]
  It can be used to make the safety fence unit stand straight
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Leveling Foot

  NIC AUTOTEC

  Leveling Foot
  This leveling foot is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes and materials to choose from.
  [Feature]
  - Height Minimun / Maximum (mm.): 18.2 and 159
  - Outside Diameter Minimun / Maximum (mm.): 25 and 60
  - Applicable For Aluminum Extrusions Series : M4, M6 and M8
  - Material : SUS304, SS400, SPCC and Low Carbon Steel with Nylon base
  - Weight (g): 128
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Floor Stoppers for Aluminum Frames

  MISUMI

  Floor Stoppers for Aluminum Frames
  This floor stoppers is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  [Feature]
  - Mounting Height (mm.) :
  AFLOCK65A,B Min = 85 , Max = 90
  AFLOCK75A,B Min = 90 , Max = 101
  - Compatible For Aluminum Extrusions :
  - 25, 30 Square (Single-Row Slot)
  - 40 Square (Single-Row Slot)
  - Material : SPHC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Small Adjuster

  YUKIGIKEN

  Small stainless steel adjuster suitable for laminar flow cabinet, etc.
  [Features]
  ・ The body is made of all-stainless steel with excellent corrosion resistance
  ・ Corresponding to a distorted floor surface by a swing mechanism of about 10°
  ・ Due to the dual structure of the main body and the bottom, the height can be adjusted by turning the main body by hand even after installation
  ・ The bottom is made of non-slip elastomer
  [Applications]
  ・ Suitable for housing, etc., in a clean environment

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Anchors for Aluminum Extrusions

  MISUMI

  Anchors for Aluminum Frames
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Body Height (mm.) : 169
  - Applicable For Aluminum Extrusions Series : HFS6 and HFS8 ,but cannot support HFS8-45
  - Material : ADC12
  - Surface Treatment: Not Provided
  - Remark: Screws and nuts are not included
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Adjuster

  YUKIGIKEN

  Adjuster
  This adjuster is commonly utilized to assemble aluminum extrusions. It is designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Height (mm.) : 70, 97.5 and 100
  - Outside Diameter (mm.) : 40 x 50
  - Thread Size : M10 and M16
  - Material :
  Shaft - SWRM
  Washer - Nylon
  Cover - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Ball Type Adjuster

  YUKIGIKEN

  Ball type adjuster.
  [Features]
  ・ It supports a distorted floor surface due to the swing mechanism
  ・ If the floor coating has low solvent resistance (single-component acrylic floor coating, etc.), the rubber of the adjuster may stick to the floor and the rubber bonding may come off
  ・ Since the foot part is a built-in type, it may come off. If it comes off, press-fit again
  ・ Material, thread section: SS400, bottom: Rubber
  ・ Surface treatment: Nickel plating
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Anchor Stands for Aluminum Extrusions

  MISUMI

  Anchors for Aluminum Frames
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Types : 2-Vertically-Connected Type and Regular Type
  - Applicable For Aluminum Extrusions Series : HFS6 and HFS8, cannot support HFS8-45
  - Material : SPHC
  - Surface Treatment: Chromate
  - Remark: Screws and nuts are not included
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Leveling Mounts/Space Saving Type

  MISUMI

  Leveling Mounts/Space Saving Type
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  [Feature]
  - Bottom Diameter (mm.) : 28, 38, 48 and 58
  - Thread Size : M8 and M12
  - Screw Length : 20, 30, 50, 80 and 100
  - Material : SS400 Equivalent
  - Applicable For Aluminum Extrusions Size : 30, 40, 50 and 60
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Foot M8/M12

  SUS

  Foot M8/M12
  This adjustable foot is commonly utilized to assemble aluminum extrusions. It is designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Thread Size : M8 and M12
  - Thread Length (mm.) : 24 mm. for M8 and 25 mm. for M12
  - Applicable For Aluminum Extrusions Series : SF series
  - Material :
  Axle - Mild steel rod
  Bottom - Polyamide
  - Weight (g):
  Foot M8 - 35 g
  Foot M12 - 71 g
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Rubber Seat

  NIC AUTOTEC

  Rubber Seat
  This rubber seat is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.):
  CLGP-60 - 38 X 6
  CLGP-120 - 45 X 6
  - Applicable For Model : CLP-60, CLP-120, CLB-120, CLB-120U and CLBS-120U
  
  - Material : EPDM
  - Color : Grey
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  AG Series Anchor Bracket Set AGBK30A

  NIC AUTOTEC

  AG Series Anchor Bracket Set AGBK30A
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Length (mm.): 180
  - Width (mm.): 35
  - Height (mm.) : 150
  - Shape : T Type
  - Material : SS400
  - Surface Treatment : Trivalent Chromate
  [Application]
  It is used to securely fixed aluminum frames to various surfaces, such as machine stands, safety fences, and so on
  

  Days to Ship:	16 Day(s) or more

• 

  Plastic Foot

  YUKIGIKEN

  Plastic Foot
  This plastic foot is commonly utilized to assemble an adjustable foot for the machine to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 23 X 11.5
  - Thread Size : M4
  - Material : Plastic ABS and Felt/Wool
  - Option : With mounting bolt and nut (for 25 series frames and 40 series frames)
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Rubber Feet (Non-Migratory Specifications)

  YUKIGIKEN

  Rubber Feet (Non-Migratory Specifications)
  This rubber seat is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 20 X 8
  - Thread Size : M4
  - Material : EPDM
  Main Body - SBR
  Washer - SPCC
  - Applicable For : 25 and 40 frame series
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Small Adjuster

  YUKIGIKEN

  Compact design adjuster.
  [Features]
  ・ A low profile design that does not damage the housing design
  ・ With a cross-head that is convenient for mounting
  [Applications]
  ・ It is used as an adjuster for small housings

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Adjuster for Corner

  YUKIGIKEN

  Adjuster for Corner
  This adjustable is commonly utilized to assemble aluminum extrusions. Moreover, this equipment can be brought close to each other or installed in corners.
  [Feature]
  - Pad size LXH (mm.) :
  AC12-F size 45X45
  AC16-F size 57X57
  - Thread Size : M12 X 1.75 and M16 X 2.0
  - Overall Length : 97 for AC12-F and 103 for AC16-F
  - Material :
  Bolt - SWRCH
  Pad - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Cost-Effective Type, Adjuster

  YUKIGIKEN

  Adjuster with excellent cost-effectiveness.
  [Features]
  ・ Large pad diameter for stability
  ・ Material, thread section: SS400, bottom: Rubber
  · Surface treatment: zinc plating
  · Weight: 300 g
  ・ Allowable load: 300 kgf
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

Loading...