Joints, Accessory Parts（Page3）

• 

  End Cap For Square Pipe (Adjustable Type) (NDAQ)

  IMAO CORPORATION

  [Applications]
  · Joint for square pipes
  
  [Features]
  · Operating temperature: -30 degrees to 100 degrees

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  End Cap For Square Pipe (NDEQ)

  IMAO CORPORATION

  [Features]
  · When inserting the end cap into the pipe, the tapered cavity inside the end cap pressurizes the inner wall of the pipe and tightening the nut makes it difficult to come out.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  End Cap For Square Pipe (NDLQ)

  IMAO CORPORATION

  [Applications]
  · Joint for square pipes
  
  [Features]
  · Operating temperature: -30 degrees to 100 degrees

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Square Pipe Insert【2-25 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Protective cover for damage prevention and dust-proofing of cut surfaces on pipes.
  

  Days to Ship:	2 Day(s) or more

• 

  Square pipe insert【50 Pieces Per Package】

  SDC TANAKA

  [Features]
  · Optimal for damage prevention and dust proofing of cut surfaces of furniture or racks made from steel or aluminum pipes.
  

  Days to Ship:	9 Day(s) or more

• 

  Inner Urethane Cap GAP-4R-BK

  TMEHJAPAN

  An inner urethane cap (made of urethane) for mounting to pipe ends.
  [Features]
  · The tip shape of the cap is hemispherical.
  · Depending on the type of pipe, some objects might be difficult to install. In such a case, try knocking it in with a plastic hammer, etc.
  · Thicker than other type of cap, allowing it to take heavier loads without breaking.
  · Compatible with 2807 Series ECO, SUH and resin‑coated pipes.
  · Use a hammer to install resin‑coated pipes.
  [Applications]
  · For caps at points at which large loads or impact are applied to the pipe tip.

  Days to Ship:	9 Day(s) or more

• 

  Sleeve GAP-44

  TMEHJAPAN

  Long sleeve for sliding.
  [Features]
  · An integrally molded (cylindrical) type product.
  · Compared to the GAP-12, it is cylindrical and wide, making it suitable for sliding applications.
  · Compatible with GA-12, GA-17, GA-22S, GA-24S and GA-25S metal joints.
  *Slide the pipe through the sleeve before using.
  [Applications]
  · Ideal for creating sliding mechanisms for lightweight objects with pipes.

  Days to Ship:	9 Day(s) or more

• 

  Plastic Cap For Swaged Pipes GAP-4F-BK

  TMEHJAPAN

  Dedicated end cap for SW09-201 Swaged Pipe.
  [Features]
  · Install by striking the cap or bushing with a plastic hammer, etc.
  [Applications]
  · Mounting to the narrowed tip of a swaged pipe.

  Days to Ship:	10 Day(s) or more

• 

  Box Stopper BS-01

  TMEHJAPAN

  A box stopper whose stopper mechanism can be released by pushing the dolly cart or other type of vehicle to which it is installed.
  [Features]
  · The stopper component moves up and down via the action of the spring.
  · Makes loading containers and the like from slide racks and conveyors onto dolly carts much easier and less time consuming.
  [Applications]
  · For applications where containers are transferred from slide racks onto dolly carts, etc.
  · For stoppers that release when connecting to a slide rack from a dolly cart.

  Days to Ship:	10 Day(s) or more

• 

  Quick Stopper

  TMEHJAPAN

  A stopper which mounts to the output/dispensing end of a slide rack.
  [Features]
  · Simply mount onto a conveyor or slide rack created using a pipe rack system.
  · Can be used as a stopper that is quick and easy to remove.
  · Easy to fix in place by simply tapping, etc. into 2 pipes.
  [Applications]
  · Used as a stopper at the output/dispensing end of conveyors and slide racks.

  Days to Ship:	10 Day(s) or more

• 

  Safety Cap For ARG-4030BL

  TMEHJAPAN

  A protective cap for use at the cut end of aluminum workpiece guide.
  [Features]
  · Mount on the cut end of the ARG-4030BL aluminum workpiece guide to protect against injury.
  · Two ASC-V30 and one ASC-H42L / ASC-H42R are required at both ends of a single workpiece guide.
  [Applications]
  · Ideal when using the ARG-4030BL.

  Days to Ship:	10 Day(s) or more

• 

  Tool Cap TC-28

  TMEHJAPAN

  An urethane cap with drill hole for mounting to pipe ends.
  [Features]
  · Features a 19-mm drill hole at the center of the urethane cap.
  · Can be mounted to all pipes with a diameter of ø28.
  · Covers the cut end of the pipe to help protect against injury.
  [Applications]
  · Ideal when inserting tools or markers into pipes.
  · Ideal for preventing damage to cords or other objects when passing them through pipes.

  Days to Ship:	9 Day(s) or more

• 

  Tool Holder

  TMEHJAPAN

  A holder for impact drivers.
  [Features]
  · Mount to a pipe rack system using the GA-1S Metal Joint to hold your impact driver.
  · Simply insert your impact driver to hold it. This also makes it easy to take out.
  · Available either in a cylindrical shape or in a cut-away shape. Also available in nylon or steel.
  · Some impact drivers from certain manufacturers may not be held stably.
  [Applications]
  · Used when you want to hold impact drivers in a manner that makes them easy to retrieve.
  · Used by mounting to tool or storage benches.

  Days to Ship:	9 Day(s) or more

• 

  Panel Holder HPA-30L/HPA-30R

  TMEHJAPAN

  A holder that accommodates simple partitioning boards.
  [Features]
  · Can be used for shelf partitioning by attaching to a board.
  · Is not capable of holding boards up if they are pushed from the side.
  · Color: yellow.
  · Can be moved/transported easily.
  [Applications]
  · Used for simple partitioning of pick shelves at distribution centers.
  · Handy for partitioning off picked items on shelves for individual orders.

  Days to Ship:	10 Day(s) or more

• 

  Hanging Hook L PH-D

  TMEHJAPAN

  A straight hook for hanging tools with hook holes in them.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Used to hang and manage items such as tools on structures built using a pipe rack system.
  · Insert numbered cards and the like to store them.

  Days to Ship:	9 Day(s) or more

• 

  Hanging Hook U PH-C

  TMEHJAPAN

  A U-shaped hook for hanging tools that have cords.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Ideal for hanging and managing items such as cleaning tools on racks built using a pipe rack system.

  Days to Ship:	9 Day(s) or more

• 

  Step-Adjusting Fixture DK-5

  TMEHJAPAN

  A ladder-shaped fixture for adjusting the height of steps/stages.
  [Features]
  · Change the height of steps/stages by mounting 4 of these fixtures (2 at the back and 2 at the front).
  · The height can be raised or lowered at a pitch of 50 mm.
  · Inclines can be applied by changing the height individually at the front or back respectively.
  · To mount a single Step-Adjusting Fixture, 4 pcs of G-7AS, 2 sets of BN06 and 4 pcs of M8 nuts are required.
  [Applications]
  · Used when you want to have an easy way to change the height of work benches or shelves.

  Days to Ship:	10 Day(s) or more

• 

  Flat Washer PW06W

  TMEHJAPAN

  A washer used at the ends of the AGP-28A Aluminum X Pipe.
  [Features]
  · A thin flat-shaped washer.
  [Applications]
  · Used when inserting the PFG-28 Panel Frame Guide into the AGP-28A Aluminum X Pipe.
  · Used when plugging the pipe so that the panel frame guide does not come away.

  Days to Ship:	10 Day(s) or more

Loading...