Rotation Handles, Crank Handles（Handle, Surface：None）

• 

  Round Rim-Type Engineering Plastic Handwheel (NRP, RP)

  IMAO CORPORATION

  A standard design plastic handwheel. Can be used with a variety of equipment and machinery. Available with or without the rotating handle.

  • STOCK

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Solid Handwheel (NSH, SH)

  IMAO CORPORATION

  Made using impact- and chemical-resistant special resin materials. A foldable type is also available in which the grip can be stowed away when not in use.
  
  [Features]
  · Made using special resin materials which, as well as offering excellent shock and impact resistance, also exhibit excellent durability against most acid, alkali and oil chemicals.
  · A rim type with a finger grip.
  · The front of the boss hole can be easily covered post-installation with the cap accessory.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Two-arm Handle, Four-arm Handle (TA, FA)

  IMAO CORPORATION

  The easy-to-grip lever enables speedy and smooth operation. The product's stylish design helps improve the appearance of any set of machine equipment.
  
  [Features]
  · Uses an OG-M grip.
  · The lever must be screwed into the boss

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Twin-Spoked Handle Wheel TW-F

  KONISHI

  A handwheel with an excellent design. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Knurled Handwheels/Plastic

  MISUMI

  [Features]·A resin knurled handle. ·The handle material is polypropylene.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Twin-Spoked Handle Wheel TW

  KONISHI

  A handwheel with an excellent design. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Square Rim Type Engineering Plastic Handle Wheel (YN, Y-N)

  KONISHI

  [Features]
  · A square rim type engineering plastic handwheel.
  · A classic handwheel that is popular among customers thanks to its low cost and lightweight

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Grill Knob (With Rotary Grip) (GH-N)

  IMAO CORPORATION

  [Features]
  · The diamond cut around the knob helps prevent slipping and provides a comfortable grip.
  · The mini rotary grip makes it suitable for areas where quick feeding under low torque is required.
  · Employs a [TG-S] type dedicated rotary grip.

  Days to Ship:	Same day or more

• 

  Stainless Steel Handle_HSM

  NABEYA BI-TECH

  [Features]
  · A standard stainless steel handle model.
  · HSM- has a grip mounting hole.
  · HSM-N- does not have a grip mounting hole.
  · Shaft holes and square holes can be machined upon request.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Plastic solid handle _HPS

  NABEYA BI-TECH

  [Features]
  · Made from phenolic resin.
  · Machined with a shaft hole (tolerance of H9).
  · HPS has a grip mounting hole.
  · Material/finish - handle: Phenolic resin (black). Hub: S45C, trivalent chromate treatment.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Plastic Handle_PH

  NABEYA BI-TECH

  [Features]
  · A standard plastic handle.
  · Cast iron: PH.
  · Stainless steel hub: PHS.
  · Grip mounting holes are included for all products.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Mini plastic handle _PD

  NABEYA BI-TECH

  [Features]
  · A mini handle made from phenolic resin.
  · Machined with a shaft hole (tolerance of H9).
  · Material/finish - handle: Phenolic resin (black). Hub: S45C, trivalent chromate treatment.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Six lobe knobs (grip) (SK-R)

  IMAO CORPORATION

  [Features]·Using RGS type rotating grip. ·Handle material is phenol.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Small Stainless Steel Handwheel (SSH, SSHR)

  IMAO CORPORATION

  A small stainless steel handwheel that is distinguished by its beautiful finish. Types with and without a rotary grip are available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Balanced Handle BA

  KONISHI

  [Features]·Balance type handle. ·Grip is available as an accessory.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Plastic Small Handwheels/Cost Efficient Product

  MISUMI

  [Features]·A general-purpose standard plastic compact handle. [Material]·Phenol.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Aluminum Disk Handle_HCH

  NABEYA BI-TECH

  An aluminum disc handle that features a built-in clutch mechanism. The handle is normally free in respect to the shaft.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Ergo Board Clamp Handle (EBCH-R)

  IMAO CORPORATION

  Made from polyamide with added glass fiber. Features a high level of mechanical strength and a sturdy ribbed structure. Select from different colors for the cap.
  
  [Features]
  · The cap is available in six colors.
  · The face of the boss hole can be easily covered using the included cap.
  · The crank features a sturdy ribbed structure.
  · Pilot holes have already been machined.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Balanced Handle (BA)

  IMAO CORPORATION

  Counterweighted for complete balance. The resin handle can even be used in operating temperatures of between -20°C and 110°C.
  
  [Features]
  · Pilot holes have already been machined.
  · Counterweighted for complete balance.
  · The strength of the material has been improved via the addition of glass fibers.
  · Uses an RG type grip which can be removed with a hex wrench from the back side.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Plastic solid handle wheel (NPS,PS)

  IMAO CORPORATION

  The material includes added glass fibers, helping provide superior impact and chemical resistance as well as excellent mechanical strength. Types with and without a rotary grip are available.
  
  [Features]
  · Employs a solid spokeless structure and high tensile strength resin.
  · Additionally, glass fiber has been added to the product's material, further improving mechanical strength, including in the form of impact resistance etc.
  · Can also be safely used with chemicals, including acids, alkaline substances, and oils and fats.
  · The rim includes finger rests. (Outer diameter of 125 mm or greater)

  CAD ：

  2D / 3D

  Days to Ship:	Same day

• 

  End Washer (EW, EW-SUS)

  IMAO CORPORATION

  The handle position can be properly aligned by machining a screw hole on the end face of the shaft. Also available in stainless steel.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Straight Crank, Offset Crank (SC, OC)

  IMAO CORPORATION

  [Features]·Standard type crank handle. ·Handle material is cast iron.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Bored Crank Handle (BCH)

  IMAO CORPORATION

  Made from polyamide with added glass fiber. Features a high level of mechanical strength and a sturdy ribbed structure. Folding rotary grip specifications are also available.
  
  [Features]
  · The crank features a sturdy rib structure.
  · The boss surface of the BCH-R and BCH-F can be easily protected using the included center plate (adhesive seal)

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Bored Crank Handle (BCHN)

  IMAO CORPORATION

  Made from polyamide with added glass fiber. Features a high level of mechanical strength and a sturdy ribbed structure. Folding rotary grip specifications are also available.
  
  [Features]
  · The crank features a sturdy rib structure.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Squared Rim-Type Engineering Plastic Handwheel (NSP, SP)

  IMAO CORPORATION

  A stylishly designed plastic handwheel. Can be used with a variety of equipment and machinery. Available with or without the rotating handle.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Engineering plastic handwheel (EDHN)

  IMAO CORPORATION

  Provides excellent impact resistance as well as excellent resistance to most chemicals, including acids, alkaline substances and oils and fats.
  
  [Features]
  · Employs a special kind of resin which provides excellent impact resistance as well as excellent resistance to most chemicals, including acids, alkaline substances, and oils and fats.
  · The shape of the rim fits easily in the hand.
  · The face of the boss hole can be easily covered using the included boss cap (insertion type).
  · The EDHN-F folding rotary hand grip can be collapsed by pulling it towards yourself. It will then retract into a pocket on the surface of the handle where it will not cause interference when not in use, helping increase safety.
  · The boss cap can be removed by pushing it up with a rod or similar from the rear.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Twin Spoke Handwheel (NTWN/TWN)

  IMAO CORPORATION

  The material includes added glass fibers, helping provide superior impact and chemical resistance as well as excellent mechanical strength. Types with and without a rotary grip are available.
  
  [Features]
  · Employs a solid spokeless structure and high tensile strength resin.
  · Additionally, glass fiber has been added to the product's material, further improving mechanical strength, including in the form of impact resistance etc.
  · Can also be safely used with chemicals, including acids, alkaline substances, and oils and fats.
  · The rim includes finger rests. (Outer diameter of 125 mm or greater)

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Engineering Plastic Disk Handle VehicleEDH-F

  KONISHI

  It is a steering wheel car with excellent design that can be stored in the steering wheel by folding the grip. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Engineering Plastic Disk Handle Wheel EDH-R

  KONISHI

  A handwheel with an excellent design. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Twin-Spoked Handle Wheel NTW

  KONISHI

  A handwheel with an excellent design. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Phenolic Resin Handwheel NRP, RP-N

  KONISHI

  [Features]·Offset spoked type phenol resin handwheel. ·Handle material is black phenol resin.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Two-arm Handle (Oval Grip) TA

  KONISHI

  A lever type handle with excellent design. The boss center includes machined holes.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Four-arm Handle (Oval Grip) FA

  KONISHI

  A lever type handle with excellent design. The boss center includes machined holes.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Bored Crank Handle BCH-R

  KONISHI

  A handwheel with an excellent design. The boss center includes machined holes. A center plate for concealing is included as standard.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Bored Crank Handle BCH-S

  KONISHI

  A handwheel with an excellent design. The boss center includes machined square holes.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Crank Handle (Straight) QA-N/QB-N

  KONISHI

  A straight crank handle equivalent to JIS B 2602-3.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Crank handle - rubber handle

  FLAIR

  A highly versatile crank handle made of plastic material.
  [Features]
  ·When specifying a round hole, HMP100 can be specified with a hole diameter of 10 or 12.
  ·A square hole can be specified by adding "SQ" to the end of the model number.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Crank Handle

  IMAO CORPORATION

  The grip uses the [ RG-SD-M ] type rotating grip.

  Days to Ship:	Same day or more

• 

  SUS Twin Spoke Handwheel

  IMAO CORPORATION

  The metal parts are made of SUS, making it ideal for use in food facilities, pharmaceutical equipment, medical equipment and other types of equipment used in fields which require certain levels of hygiene.
  
  [Features]
  · The underside of the rim is flat to prevent dirt from accumulating.
  · The boss surface can be easily protected using the included center plate (adhesive seal).
  · The TWN-F-SUS type foldable rotating handle is constructed to collapse when pulled towards you.

  Days to Ship:	10 Day(s) or more

Loading...