Dowel Pins, Spring Pins, Stepped Pins（Properties：Regular）

• 

  Spring Pins

  MISUMI

  [Features]This grippy pin can be used for simple fastening and positioning.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Dowel Pin Inch Size

  OHKITA

  Inch size dowel pin.
  Material = SCM445 Equivalent; Hardness = HRC58 to 62
  Diametric Tolerance: +0.0001 to +0.0003 (Millimeters: +0.0025 to +0.0076)
  Parallel pin type developed for positioning when assembling molds, jigs, etc.
  Uses tough chromium molybdenum steel, allowing security with thrust loads as well.
  Surface hardness has been increased and been given an even smoother finish to avoid galling while driving in.

  Days to Ship:	8 Day(s) or more

• 

  Dowel Pin With Inside Threads, E Type (With Straight Groove)

  OHKITA

  Dowel pin with internal thread that has a straight air release groove.

  Days to Ship:	8 Day(s) or more

• 

  Dowel Pin Type C

  OHKITA

  Standard Okita knock pin developed for used in positioning of molds, jigs, etc.

  Days to Ship:	8 Day(s) or more

• 

  Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】

  OCHIAI

  [Features]
  · Cylindrically coiled thin plate with a slit. When inserted (by press fit) into a hole with a diameter slightly smaller than that of its outer diameter, the pin applies internal pressure to the hole (force due to its expansion), preventing it from dropping out from the hole.
  · This hollow pin contributes to weight reduction when compared with solid pins.
  · Used for positioning, turn prevention, and retention, etc.
  · Used for simple fastening and positioning, etc.
  · Its grip prevents it from dropping out from its mating hole.
  · When it is necessary to increase the shear load, use a double-pin structure. (The load is made by adding the shear load on the outer and inner pins.)

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Parallel Pin, Class B, h7 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces is the same.

  Days to Ship:	8 Day(s) or more

• 

  Grooved Pin Type B【1-1,000 Pieces Per Package】

  SUNCO

  [Features]There is a groove gradually spread from center toward flange.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Taper Pin With External Thread【1-100 Pieces Per Package】

  OHKITA

  Insertion and maintenance are simple, since outer screws are included.

  Days to Ship:	8 Day(s) or more

• 

  Parallel Pin, Class B, h7【1-1,000 Pieces Per Package】

  OHKITA

  Pin with a negative tolerance.

  • Volume Discount

  Days to Ship:	8 Day(s) or more

• 

  Grooved Pin, C Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
  Material = A1 (Stainless Steel)

  Days to Ship:	9 Day(s) or more

• 

  Parallel Pin, Class B, h7 S45C-Q

  OHKITA

  Heat tempered dowel pin.
  The shape of the end surfaces is the same.
  Material = S45C Equivalent; Hardness = HRC23 to 33

  • Volume Discount

  Days to Ship:	8 Day(s) or more

• 

  Knock Pin A Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.

  Days to Ship:	9 Day(s) or more

• 

  Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  It has less product entanglement compared to the straight type, and is suitable for automatic insertion.
  In addition, it has long extended dimensions, with superior circularity and drawing load capacities.

  Days to Ship:	12 Day(s) or more

• 

  Dowel Pin Type A

  OHKITA

  Standard Okita knock pin developed for use in positioning of molds, jigs, etc.

  Days to Ship:	Same day or more

• 

  S45C-A Parallel Pin, B Type/Soft (h7)【1-100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
  * "h7" is the JIS fitting tolerance.

  Days to Ship:	9 Day(s) or more

• 

  S45C Taper Pin【1-1,000 Pieces Per Package】

  OHKITA

  [Features]Positive tolerance taper pin with 1/50 taper used for positioning, etc.

  Days to Ship:	8 Day(s) or more

• 

  SUS303 Parallel Pin, B Type h7【1-1,000 Pieces Per Package】

  SUNCO

  Parallel pins, also called "knock pins".
  [Features]
  ·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
  ·Used for precision machining and heavy-duty machines.
  ·Material: SUS303.
  [Applications]
  ·Not limited to positioning applications, it is widely used as a machine part.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Spring Pin【16-182 Pieces Per Package】

  TRUSCO NAKAYAMA

  - A simplified dowel pin that does not require high accuracy from its mating flat hole.
  - The outward force of a spring keeps pieces in place. (Diameter of applicable hole is the same as its nominal diameter.)

  Days to Ship:	Same day or more

• 

  Parallel Pin With Internal Thread m6

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is m6.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Days to Ship:	8 Day(s) or more

• 

  Dowel Pin B Type

  OHKITA

  Standard Okita knock pin developed for used in positioning of molds, jigs, etc.

  Days to Ship:	8 Day(s) or more

• 

  (Tempered) A-Type Parallel Pin m6【1-1,000 Pieces Per Package】

  SUNCO

  Parallel pins, also called "knock pins".
  [Features]
  ·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
  ·Used for precision machining and heavy-duty machines.
  [Applications]
  ·Not limited to positioning applications, it is widely used as a machine part.

  Days to Ship:	15 Day(s) or more

• 

  Parallel Pin, Class A, m6 S45C-Q

  OHKITA

  Heat tempered dowel pin.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.
  Material = S45C Equivalent; Hardness = HRC23 to 33

  Days to Ship:	8 Day(s) or more

• 

  Parallel Pin With Internal Thread h7

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is h7.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Days to Ship:	8 Day(s) or more

• 

  Knock Pin D Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.

  Days to Ship:	9 Day(s) or more

• 

  Grooved Pin A Type【1-1,000 Pieces Per Package】

  SUNCO

  [Features]There is a groove gradually spread. [Material] Steel

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Parallel Pin, Type A, M6【1-1,000 Pieces Per Package】

  OHKITA

  A pin with a positive tolerance.

  Days to Ship:	14 Day(s) or more

• 

  Tapered Pin With Inner Screw【1-100 Pieces Per Package】

  OHKITA

  [Features]Easy to insert via internal thread. [Shape]Can choose from taper; material: S45C and SUS303.

  Days to Ship:	Same day or more

• 

  Parallel Pin Type A【1-100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  [Features]A type steel parallel pin with large external dimensions accuracy used for rotary shafts, hinges, etc.

  Days to Ship:	15 Day(s) or more

• 

  (Hardened) Parallel Pin, Type A【1-100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  [Features]Hardening A type parallel pin with high external dimensions accuracy used for rotary shafts, hinges, etc.

  Days to Ship:	15 Day(s) or more

• 

  Parallel Pin (Type A)【10-50 Pieces Per Package】

  TRUSCO NAKAYAMA

  ● A headless, cylindrical pin with a circular cross section
  ● M6 (plus) tolerance pin diameter
  ● Used for jointing, positioning, rotation stopping, etc. by insertion into a mating hole

  Days to Ship:	Same day or more

• 

  Parallel Pin Class B, h7 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces is the same.

  Days to Ship:	8 Day(s) or more

• 

  Dowel Pin With Inside Threads, A Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Days to Ship:	Same day or more

• 

  Dowel Pin With Inside Threads, C Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Days to Ship:	8 Day(s) or more

• 

  Grooved Pin C Type【1-1,000 Pieces Per Package】

  SUNCO

  [Features]There is a horizontal groove with same thickness. [Materials]Can choose from steel or stainless steel.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Grooved Pin E Type【1-1,000 Pieces Per Package】

  SUNCO

  [Features]There are 3 grooves around center. [Material] Steel

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Grooved Pin F Type【1-1,000 Pieces Per Package】

  SUNCO

  [Features]Simple dowel pin commonly used in Europe and the United States.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
  * "h7" is the JIS fitting tolerance.

  Days to Ship:	12 Day(s) or more

• 

  S45C-Q Parallel Pin, B Type/Hard (h7)【1-100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
  * "h7" is the JIS fitting tolerance.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
  
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Days to Ship:	9 Day(s) or more

• 

  Stainless Steel Parallel Pin (Soft)【1-30,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than those of the A type. Used for rotating shafts, hinges, etc.
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Days to Ship:	9 Day(s) or more

• 

  (Hardened) Tapered Pin【1-500 Pieces Per Package】

  OHKITA

  [Features]·Hardening positive tolerance pin. ·Pin with 1/50 taper used for positioning, etc.

  Days to Ship:	8 Day(s) or more

• 

  Parallel Pin, Class A, m6 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Days to Ship:	8 Day(s) or more

• 

  Parallel Pin, Class A, m6 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Days to Ship:	8 Day(s) or more

• 

  Long Parallel Pin [m6] S45C

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Polishing completed for m6 tolerance.
  Material = S45C Equivalent (No Heat Treatment)

  Days to Ship:	9 Day(s) or more

• 

  Long Parallel Pin [m6] SUS303

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Features outstanding corrosion resistance and machining resistance.
  Polishing completed for m6 tolerance.
  Material = SUS303 Equivalent

  Days to Ship:	9 Day(s) or more

Loading...